- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Illbruck SP540 Floor Joint Sealant is a one-part, non-sagging, elastic sealant based on hybrid-polymers. Suitable for use in both indoor and outdoor applications.
- Available in Grey and Black in 310ml Cartridges (Box Of 12), and in Grey only in 600ml Sausages (Box Of 20)
- Isocyanate and silicone free
- Fast curing
- Fast tack-free time
- Permanent elasticity
- High mechanical strength and good abrasion resistance
- Excellent resistance to weathering, aging and UV exposure
- Floor joints in pedestrian walkways, warehouses, parking areas
- Time for film formation approximately 35 to 40 minutes
- Chemically neutral, non-corrosive and low odour
- EC1 Certified
- Please note: Colours shown are approximate and are for illustrative purposes only
- Please note - Black 310ml Cartridges (Box Of 12) are Made To Order subject to a minimum order quantity of 87 boxed and and extended lead time of 49 working days - please contact our Technical Department on 0113 2455450 (option 2) or send a message to [email protected] for details.
Illbruck SP540 Floor Joint Sealant SP540 is a one-part, non-sagging, elastic sealant based on hybrid-polymers. Suitable for use in both indoor and outdoor applications.
Usage/Purpose:
SP540 is an elastic hybrid sealant for floor joints in pedestrian walkways, warehouses, parking areas. SP540 can be used in both indoor and outdoor applications.
During and after curing, SP540 is chemically neutral and low odour. After total curing the product is permanently elastic while still maintaining a high mechanical strength.
The time for film formation is approximately 35 to 40 minutes. During and after curing, SP540 is chemically neutral, non-corrosive and low odour. After total curing the product is permanently elastic while still maintaining a high mechanical strength. SP540 shows a good resistance to UV light, weather and ageing. The product is free of isocyanates and silicone.
Benefits:
- Isocyanate & silicone free
- Fast curing
- Fast tack-free time
- Permanent elasticity
- High mechanical strength and good abrasion resistance
- Excellent resistance to weathering, aging and UV exposure
- For detailed product information please see the Product Data Sheet
Usage Guidelines:
- Joint faces should be clean of dust and free from substances likely to impair adhesion
- Loose friable material must be removed and arrisses made good
- Remove loose particles on concrete and plaster joints using a brush
- Metal surfaces should be degreased with solvent
- For a neat finish use masking tape for the joint edges
- It is recommended that preliminary tests are carried out
Technical Data:
Property | Result |
---|---|
Specific Gravity | 1.5 |
Consistency | Non-sagging |
Skin Forming Time | ~ 35-40 minutes |
Cure Rate | Maximum 3 mm in first 24 hours |
CE Classification | Part 1: F-EXT-INT-CC, Part 4: PWEXT- INT-CC |
Shrinkage (by Volume) | 3% |
Modulus at 100% Elongation | ~ 1.0 N/mm² |
Tensile Strength | ~ 1.7 N/mm² |
Elongation at Break | ~ 300% |
Shore A Hardness | 35 |
Movement Capability | 25% |
Application Temperature | +5°C to +40°C |
Service Temperature | -40°C to +90°C |
Storage | Store in dry conditions between +5°C and +25°C |
Shelf Life | 12 months when stored as recommended in original unopened containers |
Please contact Rawlins Paints Technical Department on 0113 2455450 (option 2) or send a message to [email protected] for more information.
Data sheet
- Manufacturer
- Illbruck
- Interior / Exterior Use
- Interior & Exterior
- For Use On
- Concrete, Plaster
- Colour
- Standard / Ready Mixed
- Single, Two or Three Pack
- Single
- Product Certifications
- EC1
- Pack Size
- 310ml (Box Of 12), 600ml Sausages (Box of 20)
- Tensile Strength
- ~ 1.7 N/mm²
- Max. Application Temperature
- 40°C
- Min. Application Temperature
- 5°C
- Shelf Life (from date of manufacture)
- 12 months
- UN Number
- N/A
- Specific Gravity
- 1.5
- Suitable For Use On
- Concrete
- Suitable For Use On
- Plaster
- Product Usage Type
- Sealant
- Colour Family
- Grey
- Colour Family
- Black
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Illbruck SP540 Floor Joint Sealant is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT