- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
HMG 14 Line Fleet Polyurethane Aerosol is a high build, high solids Polyurethane Aerosol based on a unique blend of Polyurethane Alkyds, offering excellent durability and gloss retention. This product has also been designed to be “Ready for Use”, for the non-aerosol version of this product please see HMG 14 Line Fleet Polyurethane.
- 400ml/16oz Aerosol
- Available in packs of 1 or packs of 2-10, 40, 50, 100 and 500 with qty price breaks
- Touch Dry in 2hrs @20°C
- Available in 3,500+ colours, inc. RAL Classic, BS, NCS & the new NCS 2050 colours
- Please Note: HMG Fleet and Automotive colours are available on request, please contact our Technical Department on 0113 2455450 (option 2) or email [email protected] for more information
Please note: Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colour.
Product customisation
Don't forget to save your customization to be able to add to cartDescription
HMG 14 Line Fleet Polyurethane Aerosol is a high build, high solids Polyurethane Aerosol based on a unique blend of Polyurethane Alkyds, offering excellent durability and gloss retention.
This product has also been designed to be “Ready for Use”, for the non-aerosol version of this product please see HMG 14 Line Fleet Polyurethane.
Available in packs of 1 or packs of 2-10, 40, 50, 100 and 500 with qty price breaks
Click To Jump To Section:
- Features & Benefits
- Product Specification
- Film Thickness Range And Coverage
- Drying Times
- Surface Preparation
- Application Methods
- Product Notes
- Health & Safety
Features & Benefits
- 400ml/16oz Aerosol
- Available in packs of 1 or packs of 2-10, 40, 50, 100 and 500 with qty price breaks
- Touch Dry in 2hrs @20°C
- Available in 2,400+ colours, inc. RAL Classic, BS, NCS & the new NCS 2050 colours
- Please Note: HMG Fleet and Automotive colours are available on request, please contact our Technical Department
Recommended for use with the following HMG primers/filler/sealer systems:
Product Specification
| Technical Data | |
|---|---|
| Volume Solids: | 30.6 % |
| VOC Content: | - |
| SG: | - |
| Viscosity: | Not determined |
| Density: | 0.979 g/cm³ |
| Storage Conditions: | Store between 5°C - 25°C. When not in use, cans must be kept sealed. |
| Shelf Life: | 12 months from delivery date in original sealed containers. |
| Flash Point: | -19°C |
Film Thickness Range And Coverage
| Product Data | |||
|---|---|---|---|
| Dry Film Thickness | Wet Film Thickness | ||
| Aerosol: | 55 μm | 100 μm | |
Coverage: 10 square metres per litre @ 55 microns dft (Theoretical)
- HMG technical data sheets indicate a dry film thickness that will be achieved when applying a particular wet film thickness
- These values are a guide only and are not to be used as specifications
- Film thickness will vary depending on actual use and specification
- Great care should be taken to achieve the dft stated in the agreed specification and to avoid areas of excessively low or high thickness
Drying Times
| Drying Times At 20°C | |||
|---|---|---|---|
| Touch Dry: | 2 hours | ||
| Dry To Recoat: | Minimum 24 hours depending on build & temperature. Surface should be denibbed prior to overcoating | ||
| Fully Cured: | 8 hours | ||
Surface Preparation
- Ensure surfaces to be coated are dry and must be cleaned using the appropriate HMG product to remove all traces of contaminants
Application Methods
Aerosol
- Ready For Use
- Flash Off - 20 mins between coats
Product Notes
| Information on basic physical and chemical properties | |
|---|---|
| Form: | Aerosol |
| Colour: | According to product specification |
| Odour: | Characteristic |
| Odour Threshold: | Not determined |
| pH-value: | Not determined |
| Change in Condition | |
| Melting point/freezing point: | Undetermined |
| Initial boiling point and boiling range: | 555°C |
| Flash Point: | -19°C |
| Flammability (solid, gas): | Not applicable |
| Ignition temperature: | >200°C |
| Decomposition temperature: | Not determined |
| Auto-ignition temperature: | Product is not self-igniting |
| Explosive properties: | Not Determined |
| Explosion limits: Lower: | 0.6 Vol % |
| Explosion limits: Upper: | 7.1 Vol % |
| Vapour pressure at 20°C: | 29 hPa |
| Density at 20°C: | 0.954 g/cm³ |
| Relative density: | Not determined |
| Vapour density: | Not determined |
| Evaporation rate: | Not determined |
| Solubility in / Miscibility with water: | NOT MISCIBLE |
| Partition coefficient: n-octanol/water: | Not determined |
| Viscosity: Dynamic at 20°C: | Not determined |
| Viscosity: Kinematic: | Not determined |
| Solvent content: Organic solvents: | 69.2% |
| Solids content: | 28.2% |
Health & Safety
- Refer to the Safety data sheet in the attachments section above and tin label prior to use
- Suitable respiratory equipment should be worn when spraying
- Contaminated rags, spray booth filters or other substrates should be segregated from other chemical waste, soaked with water and disposed of in a non-combustible container with a tight fitting lid
Product Details
5687-890250
Data sheet
- Manufacturer
- HMG Paints Limited
- For Use On
- Concrete
- Application Method
- Brush
Spray - Sheen
- Matt
Satin
Gloss - Colour
- Fully Tintable
- Single, Two or Three Pack
- Single
- Pack Size
- 400ml/16oz Aerosol
- Suitable Substrates
- Concrete Flooring
- Touch Dry (at 20°C)
- 2 Hours
- Dry to Recoat (at 20°C)
- Min 24 hrs depending on build & temp. Surface should be denibbed prior to overcoating
- Fully Cured (at 20°C)
- 8 Hours
- Density
- 0.979 g/cm³
- Solids by Volume
- 30.6 %
- Shelf Life (from date of manufacture)
- 12 months from delivery date in original sealed containers.
- Finish
- Matt
Satin
Gloss - Size
- 400ml/16oz
- Recommended Dry Film Thickness
- 55 μm
- Recommended Wet Film Thickness
- 100 μm
- UN Number
- UN1950
- Base Type
- Polyurethane
- Suitable For Use On
- Concrete
- Finish
- Matt
- Finish
- Satin
- Finish
- Gloss
- Application Method
- Brush
- Application Method
- Spray
- Product Usage Type
- Topcoat
- Product Range
- 14 Line
- Colour Family
- Blue
- Colour Family
- Red
- Colour Family
- Brown
- Colour Family
- Pink
- Colour Family
- Orange
- Colour Family
- Purple
- Colour Family
- Yellow
- Colour Family
- Black
- Colour Family
- Clear
- Colour Family
- White
- Colour Family
- Neutral
- Colour Family
- Metallic
- Colour Family
- Anthracite Grey
- Colour Family
- Stone
- Colour Family
- Beige
- Colour Family
- Grey
- Colour Family
- Green
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
HMG 14 Line Fleet Polyurethane Aerosol is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
You might also like
HMG 14 Line Fleet Polyurethane
HMG 14 Line Fleet Polyurethane is a high build, high solids polyurethane based on a unique blend of polyurethane alkyds. It combines a long wet edge time with excellent hot spray application offering superb durability and gloss retention. Can be brushed directly from the can or with the addition of a small amount of thinner Suitable for...
Price
£22.10
(incl. VAT)
In Stock and Available for Delivery
HMG Synthetic BDX Primer
HMG Synthetic BDX Primer is a high build, anti-corrosive, single pack alkyd primer for use under all HMG synthetic topcoats, combining high build and excellent sandability with outstanding application and scratch filling properties. For use on suitably prepared structural steel, chassis, fabrication and aluminium Can be applied to bare...
Price
£19.03
(incl. VAT)
In Stock and Available for Delivery
HMG Speedbuild 3 Primer
HMG Speedbuild 3 Primer is a 1K, high build, high solids, anti-corrosive primer. This product MUST be purchased/used in conjuction with its manufacturer specified base or activator/hardener/thinner: 2-Pack System Details Base (Part 1) HMG Speedbuild 3 Primer Thinner (Part 2) HMG Thinner 2601 HMG Thinner 2602 HMG...
Price
£69.32
(incl. VAT)
In Stock and Available for Delivery
HMG Synthetic High Opacity Undercoat
HMG Synthetic High Opacity Undercoat is a 1K alkyd/polyurethane undercoat with superior brushing qualities and excellent obliteration properties. Suitable for large areas due to its ease of application and long wet edge time Please note: Colours shown are for illustrative purposes only
Price
£47.78
(incl. VAT)
In Stock and Available for Delivery
HMG Thinner 2611
HMG Thinner 2611 is a medium thinner. For use with compatible HMG systems.
Price
£13.45
(incl. VAT)
In Stock and Available for Delivery
HMG Thinner 2612
HMG Thinner 2612 is a slow thinner. For use with compatible HMG systems.
Price
£14.09
(incl. VAT)
In Stock and Available for Delivery
HMG Hardener 9029 ZIP
HMG Hardener 9029 ZIP is an isocyanate hardener. Designed for use in recommended HMG Alkyd and Polyurethane Alkyd systems. Upgrades the performance characterstics of the system, including durability and time to touch dry may decrease by 10 - 20% dependant on paint system, film thickness and curing conditions.
Price
£87.98
(incl. VAT)
In Stock and Available for Delivery
Surface Preparation Kits for Steel
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools) 1 x Rust-Oleum...
Price
£25.93
(incl. VAT)
In Stock and Available for Delivery