- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
- Dewaxed shellac-base sanding sealer in a clear finish.
- Can be used on doors, trim, skirting boards, panelling, wainscoting, cabinets, shelves, furniture, interior shutters, floors, stairs, banisters, spindles, wood turnings, figurines, carvings, wicker, plaster, and other hobby/craft items.
- Fast drying - can be recoated in less than 1 hour.
- Deeply penetrates wood pores for effective sealing.
- Compatible with all clear finishes, including solvent-based and water-based polyurethane varnish, lacquer, and shellac.
- Sands easily and quickly for smooth results.
Zinsser Bulls-Eye Sealcoat - High-Quality, Dewaxed Shellac-Base Sanding Sealer
Provides excellent sealing properties and compatibility with various finishes. Ideal for both professional and consumer use, this product ensures superior performance for a wide range of interior wood surfaces.
Applications
- Doors, trim, skirting boards, panelling, wainscoting
- Cabinets, shelves, furniture, interior shutters
- Floors, stairs, banisters, and spindles
- Wood turnings, figurines, carvings, wicker, plaster, and other hobby/craft items
SealCoat can be used as a pre-stain sealer and wood conditioner, evening the porosity of woods such as pine and fir for even stain penetration. It also serves as a barrier coat to seal odours in certain types of wood and particleboard. However, it is not recommended for exterior surfaces.
Application Instructions
Surfaces must be clean, dry, and sound. Remove any wax with methylated spirits and sand bare wood smoothly. Apply SealCoat with a natural bristle brush, lint-free cloth, or spray. Allow the first coat to dry for 45 minutes before sanding with 120 or finer grit sandpaper. A second coat improves film build and depth on porous woods.
Drying and Cleanup
At 20°C, SealCoat dries to the touch in a few minutes on bare wood and can be sanded and recoated in about 20 to 30 minutes. For subsequent coats, the drying time is reduced to 10 to 15 minutes. Clean up drips and spills with methylated spirits, and use the same for cleaning brushes. Soak tools overnight to dissolve dried product.
Restrictions
Avoid applying SealCoat when the relative humidity is above 85% or when the temperature is within 2ºC of the dew point. Do not use in areas where surface heat exceeds 71°C. Not suitable for exterior surfaces.
Safety Information
Highly flammable liquid and vapour. May cause damage to organs. Keep away from heat, sparks, open flames, and hot surfaces. Store in a well-ventilated place, keep cool, and dispose of contents and container in accordance with local regulations.
Zinsser Bulls-Eye SealCoat is classified as highly flammable (UN1263). Contains no Diisocyanates. Safety precautions include keeping away from ignition sources and using proper ventilation during application.
Data sheet
- Manufacturer
- Zinsser
- For Use By
- Consumer Use
- Interior / Exterior Use
- Interior Use
- Water / Solvent Based
- Solvent
- For Use On
- Oak
Maple
Chestnut
Mahogany
Walnut
Birch
Poplar
Cherry
Wooden Floors
Wood
Wooden Surfaces - Application Method
- Brush
Spray
Airless Spray
Cloth - Colour
- Clear
- Pack Size
- 1L
- Touch Dry
- 10 Mins
- UN Number
- UN1263
- Colour(s)
- Clear
- Base Type
- Shellac
- Suitable For Use On
- Wood
- Suitable For Use On
- Wooden Floors
- Suitable For Use On
- Oak
- Suitable For Use On
- Birch
- Suitable For Use On
- Wooden Surfaces
- Suitable For Use On
- Maple
- Suitable For Use On
- Chestnut
- Suitable For Use On
- Mahogany
- Suitable For Use On
- Poplar
- Suitable For Use On
- Cherry
- Suitable For Use On
- Walnut
- Application Method
- Brush
- Application Method
- Spray
- Application Method
- Cloth
- Application Method
- Airless Spray
- Components
- 1K
- Product Usage Type
- Sealer
- Fastest Delivery
- Next Working Day
- Type of Wood Finish
- Wood Primers
- Colour Family
- Clear
Questions
Question about the product
Tony Wills on 2023-08-25 00:38:42 | Question:
Hello. Can the seal coat be used directly over previously waxed surfaces without the need to strip the timber surface back? Thank you |
Answer from Rawlins’ Technical Team:
When applying this product, any previous wax coating will need to be removed fully before application of Zinsser SealCoat in order to allow it to fully soak into and adhere to the substrate. | |
IMPORTANT SHIPPING & DELIVERY INFORMATION
Zinsser SealCoat is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT