- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
HMG M99 Cellulose Aerosol is a high quality cellulos aerosol for use on Classic Cars, and in Industrial applications. It provides fast through drying, ease of use, and gives a hard and durable dried film. This product has also been designed to be “Ready for Use”, for the non-aerosol version of this product please see HMG M99 Cellulose.
- 400ml/16oz Aerosol
- Available in packs of 1 or packs of 2-10, 40, 50, 100 and 500 with qty price breaks
- Available in 3,500 colours from RAL, NCS, and British Standard
- Touch dry in 10 mins @20°C
- Please Note: HMG Fleet and Classic Car colours are available on request, please contact our Technical Department on 0113 2455450 (option 2) or email [email protected] for more information
Please note: Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colour.
Product customisation
Don't forget to save your customization to be able to add to cartHMG M99 Cellulose Aerosol is a high quality Cellulose Aerosol for use on Classic Cars, Industrial applications. It provides fast through drying, ease of use, and gives a hard and durable dried film. This product has also been designed to be “Ready for Use”, for the non-aerosol version of this product please see HMG M99 Cellulose.
Click To Jump To Section:
- Features & Benefits
- Product Specification
- Film Thickness Range And Coverage
- Drying Times
- Surface Preparation
- Application Methods
- Product Notes
- Health & Safety
Features & Benefits
- 400ml/16oz Aerosol
- Available in packs of 1 or packs of 2-10, 40, 50, 100 and 500 with qty price breaks
- This product is for use only in industrial applications and classic car vehicle refinishing
- Available in 3,500 colours from RAL, NCS, and British Standard
- Touch dry in 10 mins @20°C
- Please Note: HMG Fleet and Classic Car colours are available on request, please contact our Technical Department on 0113 2455450 (option 2) or email [email protected] for more information
Product Specification
Technical Data | |
---|---|
Volume Solids: | 12.1% |
VOC Content: | - |
SG: | - |
Viscosity: | - |
Density: | 0.78 g/cm³ |
Storage Conditions: | Store between 5°C - 25°C. When not in use, cans must be kept sealed |
Shelf Life: | 12 months from delivery date in original sealed containers. |
Flash Point: | -42°C |
Film Thickness Range And Coverage
Product Data | |||
---|---|---|---|
Dry Film Thickness | Wet Film Thickness | ||
Aerosol: | 20 μm | 50 μm |
- HMG technical data sheets indicate a dry film thickness that will be achieved when applying a particular wet film thickness
- These values are a guide only and are not to be used as specifications
- Film thickness will vary depending on actual use and specification
- Great care should be taken to achieve the dft stated in the agreed specification and to avoid areas of excessively low or high thickness
Drying Times
Drying Times At 20°C | |
---|---|
Touch Dry: | 10 minutes |
Hard Dry: | 45 minutes |
Surface Preparation
Ensure surfaces to be coated are dry and must be cleaned using the appropriate HMG product to remove all traces of contaminants.
Application Methods
Technical Data | |||||
---|---|---|---|---|---|
Aerosol | |||||
Mixing Ratio: | Ready for use | ||||
- | |||||
Thinner Options: | - | ||||
- | |||||
Viscosity: | Ready for use | ||||
Recoatability: | Any stage after flash off | ||||
Number Of Coats (Guide Only): | 2 full coats | ||||
Flash Off: | 10 minutes |
Product Notes
Information on basic physical and chemical properties | |
---|---|
Form: | Aerosol |
Colour: | According to product specification |
Odour: | Characteristic |
Odour Threshold: | Not determined |
pH-value: | Not determined |
Change in Condition | |
Melting point/freezing point: | Undetermined |
Initial boiling point and boiling range: | 56°C |
Flash Point: | -42°C |
Flammability (solid, gas): | Not applicable |
Ignition temperature: | 235°C |
Decomposition temperature: | Not determined |
Auto-ignition temperature: | Product is not selfigniting |
Explosive properties: | Heating may cause an explosion |
Explosion limits: Lower: | 1.2 Vol % |
Explosion limits: Upper: | 18.6 Vol % |
Vapour pressure at 20°C: | 5200 hPa |
Density at 20°C: | 0.78 g/cm³ |
Relative density: | Not determined |
Vapour density: | Not determined |
Evaporation rate: | Not applicable |
Solubility in / Miscibility with water: | NOT MISCIBLE |
Partition coefficient: n-octanol/water: | Not determined |
Viscosity: Dynamic at 20°C: | Not determined |
Viscosity: Kinematic: | Not determined |
Solvent content: Organic solvents: | 89.1% |
Solids content: | 12.1% |
Health & Safety
- Refer to the Safety Data Sheet in the attachments section above and tin label prior to use
- Suitable respiratory equipment should be worn when spraying
Data sheet
- Manufacturer
- HMG Paints Limited
- Water / Solvent Based
- Solvent
- For Use On
- Metal
- Application Method
- Aerosol
- Sheen
- Textured
Satin
Gloss
Matt - Colour
- Fully Tintable, Clear
- Single, Two or Three Pack
- Single
- Pack Size
- 400ml/16oz Aerosol
- Touch Dry (at 20°C)
- 10 Minutes
- Density
- 0.78 g/cm³
- Solids by Volume
- 12.1 %
- Shelf Life (from date of manufacture)
- 12 months from delivery date in original sealed containers.
- Recommended Dry Film Thickness
- 20 μm
- Recommended Wet Film Thickness
- 50 μm
- UN Number
- UN1950
- Hard Dry
- 45 minutes @20°C
- Base Type
- Cellulose
- Suitable For Use On
- Vehicles
- Finish
- Matt
- Finish
- Satin
- Finish
- Gloss
- Finish
- Textured
- Application Method
- Aerosol
- Product Usage Type
- Topcoat
- Colour Family
- Red
- Colour Family
- Brown
- Colour Family
- Pink
- Colour Family
- Orange
- Colour Family
- Purple
- Colour Family
- Yellow
- Colour Family
- Black
- Colour Family
- Clear
- Colour Family
- White
- Colour Family
- Neutral
- Colour Family
- Metallic
- Colour Family
- Anthracite Grey
- Colour Family
- Stone
- Colour Family
- Beige
- Colour Family
- Grey
- Colour Family
- Green
- Colour Family
- Blue
Questions
Question about the product
Andrew Denman-Davies on 2024-10-02 13:34:18 | Question:
I can't see any information of sq.m coverage per can of paint? Trying to find out how many I need to cover my 6x radiators. If someone could help that would be great. Thank you, Andrew |
Answer from Rawlins’ Technical Team:
HMG do not list a coverage rating for this product in Aerosol form. | |
IMPORTANT SHIPPING & DELIVERY INFORMATION
HMG M99 Cellulose Aerosol is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
HMG M99 Gipgloss Cellulose Enamel
We no longer stock this product, but can recommend HMG M99 Cellulose as a great alternative. Please note: it is important to check that any alternative product is suitable for your requirements, as our suggestion is given in good faith but without warranty. If you are in any doubt please first contact our technical team on 0113 2455450...
HMG Thinner 2641
HMG Thinner 2641 is a medium fast thinner. Designed for use with cellulose based systems.
Surface Preparation Kits for Steel
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools) 1 x Rust-Oleum...