- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
HMG RAD Aerosol is a 1K modified thermoplastic acrylic offering rapid air dry, outstanding gloss and colour retention together with excellent adhesion. This product has also been designed to be “Ready for Use”, for the non-aerosol version of this product please see HMG RAD Enamel.
- 400ml/16oz Aerosol
- Available in packs of 1 or packs of 2-10, 40, 50, 100 and 500 with qty price breaks
- Available in 3,500 colours from RAL, NCS, and British Standard
- Touch dry in 10 mins @20°C
Please note: Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colour.
Product customisation
Don't forget to save your customization to be able to add to cartDescription
HMG RAD Aerosol is a 1K modified thermoplastic acrylic offering rapid air dry, outstanding gloss and colour retention together with excellent adhesion. This product has also been designed to be “Ready for Use”, for the non-aerosol version of this product please see HMG RAD Enamel.
- Features & Benefits
- Product Specification
- Film Thickness Range And Coverage
- Drying Times
- Surface Preparation
- Application Methods
- Product Notes
- Health & Safety
Features & Benefits
- 400ml/16oz Aerosol
- Available in packs of 1 or packs of 2-10, 40, 50, 100 and 500 with qty price breaks
- Available in 3,500 colours from RAL, NCS, and British Standard
- Touch dry in 10 mins @20°C
Product Specification
| Technical Data | |
|---|---|
| Volume Solids | 14.8% |
| VOC Content | - |
| SG | N/A |
| Viscosity: | - |
| Density: | 0.776 g/cm³ |
| Storage Conditions | Store between 5°C - 25°C. When not in use, cans must be kept sealed. |
| Shelf Life | 12 months from delivery date in original sealed containers. |
| Flash Point | -42°C |
Film Thickness Range And Coverage
| Product Data | |||
|---|---|---|---|
| Dry Film Thickness | Wet Film Thickness | ||
| Aerosol: | 12 - 15 µm | 20 - 25 µm | |
- HMG technical data sheets indicate a dry film thickness that will be achieved when applying a particular wet film thickness
- These values are a guide only and are not to be used as specifications
- Film thickness will vary depending on actual use and specification
- Great care should be taken to achieve the dft stated in the agreed specification and to avoid areas of excessively low or high thickness
Drying Times
| Drying Times At 20°C/RH 50% | |||
|---|---|---|---|
| Touch Dry: | 10 minutes | ||
| Hard Dry: | 60 minutes | ||
| Dry To Recoat: | Possible at any stage of drying. | ||
| Fully Cured: | 8 hours | ||
Surface Preparation
- Ensure surfaces to be coated are dry and must be cleaned using the appropriate HMG product to remove all traces of contaminants
- Always use the same batch number on the same job
- Check colour & sheen
- Filter the product immediately before use
- Reduce emissions and maintain quality by replacing tin lid after use
Application Methods
| Technical Data | |||
|---|---|---|---|
| Aerosol | |||
| Mixing Ratio | Ready For Use | ||
| N/A | |||
| Thinner Options | N/A | ||
| Viscosity | N/A | ||
| Spray Gun Setup | N/A | ||
| Number Of Coats (Guide Only) | 1 - 2 full coats | ||
| Flash Off | 10 minutes between coats | ||
Product Notes
| Information on basic physical and chemical properties | |||
|---|---|---|---|
| Form: | Aerosol | ||
| Colour: | According to product specification | ||
| Odour: | Characteristic | ||
| Odour Threshold: | Not determined | ||
| pH-value: | Not determined | ||
| Melting point/freezing point: | Undetermined | ||
| Initial boiling point and boiling range: | -24°C | ||
| Flash Point: | -42°C | ||
| Flammability (solid, gas): | Not applicable | ||
| Ignition temperature: | 235°C | ||
| Decomposition temperature: | Not determined | ||
| Auto-ignition temperature: | Product is not selfigniting | ||
| Explosive properties: | Heating may cause an explosion | ||
| Explosion limits: Lower: | 1.1 Vol % | ||
| Explosion limits: Upper: | 18.6 Vol % | ||
| Vapour pressure at 20°C: | 10400 hPa | ||
| Density at 20°C: | 0.776 g/cm³ | ||
| Relative density: | Not determined | ||
| Vapour density: | Not determined | ||
| Evaporation rate: | Not applicable | ||
| Solubility in / Miscibility with water: | NOT MISCIBLE | ||
| Partition coefficient: n-octanol/water: | Not determined | ||
| Viscosity: Dynamic at 20°C: | Not determined | ||
| Viscosity: Kinematic: | Not determined | ||
| Solvent content: Organic solvents: | 85.2% | ||
| Solids content: | 14.8% | ||
Health & Safety
- Refer to Safety Data Sheet in the attachments section above, and tin label prior to use
- Suitable respiratory equipment should be worn when spraying
Product Details
5723-893282
Data sheet
- Manufacturer
- HMG Paints Limited
- Sheen
- Matt
Satin
Gloss - Single, Two or Three Pack
- Single
- Pack Size
- 400ml/16oz Aerosol
- Key Features
- Quick drying - Touch Dry in 10 minutes. Ease of use. Available in a wide range of colours.
- Touch Dry (at 20°C)
- 10 Mins
- Dry to Recoat (at 20°C)
- Possible at any stage of drying
- Fully Cured (at 20°C)
- 8 Hours
- Density
- 0.776 g/cm³
- Solids by Volume
- 14.8%
- Shelf Life (from date of manufacture)
- 12 months from delivery date in original sealed containers
- Finish
- Matt, Satin and Gloss
- Recommended Dry Film Thickness
- 12 - 15 µm
- Recommended Wet Film Thickness
- 20 - 25 µm
- UN Number
- UN1950
- Hard Dry
- 60 mins @20°C
- Finish
- Satin
- Finish
- Gloss
- Finish
- Matt
- Application Method
- Aerosol
- Product Usage Type
- Topcoat
- Product Range
- RAD
- Colour Family
- Black
- Colour Family
- Clear
- Colour Family
- White
- Colour Family
- Neutral
- Colour Family
- Metallic
- Colour Family
- Anthracite Grey
- Colour Family
- Stone
- Colour Family
- Beige
- Colour Family
- Grey
- Colour Family
- Green
- Colour Family
- Blue
- Colour Family
- Red
- Colour Family
- Brown
- Colour Family
- Pink
- Colour Family
- Orange
- Colour Family
- Purple
- Colour Family
- Yellow
- Product Attributes
- Gloss Retention
- Product Attributes
- Colour Retention
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
HMG RAD Aerosol is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
You might also like
HMG RAD Enamel
HMG RAD Enamel, is a 1K modified thermoplastic acrylic offering rapid air dry, outstanding gloss and colour retention together with excellent adhesion. Quick drying - touch dry in 10 minutes Ease of use Available in 5,000+ colours from RAL, NCS, and British Standard Also available as an aerosol, please see HMG RAD Aerosol Please note:...
Price
£39.78
(incl. VAT)
In Stock and Available for Delivery
HMG Thinner 2621
HMG Thinner 2621 is a thinner for use in various applications. For use with compatible HMG systems.
Price
£13.45
(incl. VAT)
In Stock and Available for Delivery
HMG Thinner 2661
A standard thinner that, when used with HMG PVC 17, allows for direct application of 5,000 colour options in temperatures in excess of 25⁰C on hard-to-coat surfaces such as hard plastics, powder coatings, most factory finishes, and architectural cladding.
Price
£15.59
(incl. VAT)
In Stock and Available for Delivery
Surface Preparation Kits for Steel
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools) 1 x Rust-Oleum...
Price
£25.93
(incl. VAT)
In Stock and Available for Delivery