- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
HMG SPS30 Primer Finish Aerosol is a quick drying SPS (Single Protection System) single coat finish offering excellent performance.
For the non-aerosol version of this product please see HMG SPS30 Primer Finish.
- Provided with a sheen level of 30% finish
- Hard dry in as little as 60 minutes at 20℃
- Coverage up to 8-10m2/L
- 400ml/16oz Aerosol
- Available in packs of 1 or packs of 2-10, 40, 50, 100 and 500 with qty price breaks
- Available in 5,000+ colours from RAL, NCS, and British Standard
- Please Note: HMG Fleet and Automotive colours are available on request, please contact our Technical Department on 0113 2455450 (option 2) or email [email protected] for more information
Please note: Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colour.
Product customisation
Don't forget to save your customization to be able to add to cartHMG SPS30 Primer Finish Aerosol is a quick drying SPS, (single protection system) single coat finish offering excellent performance. This product has also been designed to be “Ready for Use”, for the non-aerosol version of this product please see HMG SPS30 Primer Finish.
Click To Jump To Section:
Features & Benefits
- Ready for use
- 400ml/16oz Aerosol
- Coverage up to 8-10m2/L
- 30% Sheen
- Touch Dry in 30mins @20°C
- Available in packs of 1 or packs of 2-10, 40, 50, 100 and 500 with qty price breaks
- Available in 5,000+ colours from RAL, NCS, and British Standard
Drying Times
Drying Times At 20°C | |
---|---|
Touch Dry: | 30 minutes |
Dry To Recoat: | Approximately 48 hours at 20°C dependant on film thickness |
Fully Cured: | 60 minutes |
Surface Preparation
- Ensure surfaces to be coated are dry and must be cleaned using the appropriate HMG product to remove all traces of contaminants
- Read and follow the safety data sheet (available in Data Sheet tab above) and label instructions
- Always use the same batch number on the same job
- Check colour & sheen
- Reduce emissions and maintain quality by replacing lid after use
For further information please contact Rawlins Paints Technical support on - 0113 2455450 (option 2) or [email protected]
Product Notes
Information On Basic Physical And Chemical Properties | ||||||
---|---|---|---|---|---|---|
SPS30 Aerosol | ||||||
Form: | Aerosol | |||||
Colour: | According to product specification | |||||
Odour: | Characteristic | |||||
Odour Threshold: | Not determined | |||||
pH-value 20°C: | Not determined | |||||
Melting point/freezing point: | Undetermined | |||||
Initial boiling point and boiling range: | -24.9°C | |||||
Flash Point: | -42°C | |||||
Flammability (solid, gas): | Not applicable | |||||
Ignition temperature: | 235°C | |||||
Decomposition temperature: | Not determined | |||||
Auto-ignition temperature: | Product is not selfigniting | |||||
Explosive properties: | Not determined | |||||
Explosion limits: Lower: | 1.1 Vol% | |||||
Explosion limits: Upper: | 18.6 Vol% | |||||
Vapour pressure at 20°C: | 5200 hPa | |||||
Density at 20°C: | 0.806 g/cm³ | |||||
Relative density: | Not determined | |||||
Vapour density: | Not determined | |||||
Evaporation rate: | Not determined | |||||
Solubility in / Miscibility with water: | NOT MISCIBLE | |||||
Partition coefficient: n-octanol/water: | Not determined | |||||
Viscosity: Dynamic at 20°C: | Not determined | |||||
Viscosity: Kinematic: | Not determined | |||||
Solvent content: Organic solvents: | 77.3% | |||||
Solids content: | 22.7% |
Health & Safety
- Refer to the safety data sheet in the attachments section above and tin label prior to use
- Suitable respiratory equipment should be worn when spraying
- Contaminated rags, spray booth filters or other substrates should be segregated from other chemical waste, soaked with water and disposed of in a non-combustible container with a tight fitting lid
Data sheet
- Manufacturer
- HMG Paints Limited
- For Use By
- Professional Use
- For Use On
- Metal
- Application Method
- Aerosol
- Sheen
- 30% Finish
- Colour
- Fully Tintable
- Single, Two or Three Pack
- Single
- Pack Size
- 400ml/16oz Aerosol
- Touch Dry (at 20°C)
- 30 minutes
- Dry to Recoat (at 20°C)
- Approximately 48 hours at 20°C dependant on film thickness.
- Fully Cured (at 20°C)
- 60 minutes
- Coverage
- 8-10 square metres per litre @ 100 microns wft
- Recommended Thinner/Cleaner
- HMG 2621
- VOC
- 0.520 Kg/l
- Shelf Life (from date of manufacture)
- 12 months from delivery date in original sealed containers
- Finish
- 30% Sheen
- UN Number
- UN1950
- Flashpoint
- -42°C
- Colour(s)
- Fully Tintable
- Suitable For Use On
- Metal
- Finish
- 30% Sheen
- Application Method
- Aerosol
- Manufacturer
- HMG Paints LTD
- Usages
- Quick Drying
- Product Usage Type
- Primer
- Colour Family
- Yellow
- Colour Family
- Black
- Colour Family
- White
- Colour Family
- Neutral
- Colour Family
- Grey
- Colour Family
- Green
- Colour Family
- Blue
- Colour Family
- Red
- Colour Family
- Brown
- Colour Family
- Pink
- Colour Family
- Orange
- Colour Family
- Purple
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
HMG SPS30 Primer Finish Aerosol is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
HMG SPS30 Primer Finish
HMG SPS30 Primer Finish is a quick drying SPS (Single Protection System) single coat finish offering excellent performance. Provided with a sheen level of 30% finish Hard dry in as little as 60 minutes at 20℃ Touch dry in 30 mins at 20℃ Coverage up to 8-10m2 per litre Flashpoint: 24℃ Available in 5,000+ colours from RAL, NCS, and...
HMG Thinner 2621
HMG Thinner 2621 is a thinner for use in various applications. For use with compatible HMG systems.
Surface Preparation Kits for Steel
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools) 1 x Rust-Oleum...