Would this be any good to spray laminated kitchen cupboards and doors?

Assuming the surface is clean, dry, sound and prepared as detailed in the technical datsheet, you could consider this product. If spraying apply 2 coats allowing for the first to dry to touch before application of the second coat. This is available in your choice of 4900+ RAL, BS & NCS Colours to a Smooth or Textured finish. This product can be applied at the supplied viscosity, and can be thinned by 5% clean water if required. To ensure the substrate is prepared thoroughly, you could purchase Kolorbond UPVC Painting Kits , this comes with the Aquatek paint + preparatory equipment to ensure the cabinets are thoroughly prepared to give 10 year adhesion and 5 year colour fastness guarantee.

Hi Can this be sprayed using a graco.ff 108 spray tip F

This product can be spray applied by Graco airless systems, however the manufacturer has advised using the ff108 tip gives a relatively narrow spray when applying to fascia boards and window profiles. Should a larger area be sprayed, a tip with a wider fan would be recommended in this instance.

Can this product be applied onto doors with mini rollers

Assuming the doors are bare upvc, they are clean, dry, sound and prepared as detailed in the technical data sheet this could be used. This can be mixed to many RAL, NCS or BS colours in a satin finish. This is also availble in the Kolorbond UPVC painting kits which also contain the required preparatory materials.

Can I use this on UPVC that has already been painted?

Assuming the existing UPVC coating is clean, dry, sound, and prepared as detailed in the technical data sheet this product can be used. We would recommend to test on a small area for compatibility and adhesion prior to full application. This product is also available in a pack complete with the necessary prepatory materials Kolorbond UPVC Painting Kits

Hello, can the UPVC paint be applied in colder weather conditions? Many thanks Pete

Unfortunately for application of this product the temperature for application and curing must be over 10°C. While the solvent based spray application only Kolorbond Original can be applied at 8°C it must also be over this for curing. Care must be taken to ensure moisture does not form on the service while curing.

Hi - can you supply this product in Valspar colours (X105R200B) or hex #62778A or RGB 98,119,138 Thanks

Unfortunately no, but it can be mixed to many RAL, NCS or BS colours with a satin finish.

Can this paint be used on fin lock gutters, please?

Assuming you are looking to paint the outside of the fin lock gutters, they are upvc, clean, dry, sound and prepared as detailed in the technical data sheet yes. We also stock this product as part of a kit, including the required preparation materials. Kolorbond uPVC Painting Kits .

Do I need to use a primer underneath the paint? It’s an untreated pvcu door. Thank you.

No, a primer is not required when this is applied to clean, dry, sound and prepared UPVC. The two preparatory cleaners must be used prior to application. We do sell these products in a kit with the Aquatek. Kolorbond UPVC Painting Kits.

Can this paint be applied normally with a brush?

Yes this product can be applied by brush or spray application directly. For roller application you must add up to 20% Technispray KolorFlow to the paint. KolorFlow slows the drying of the paint, so can also be used to keep a wet edge when brushing or to prevent the paint from drying too fast on a hot day.

Hi I see this is a water base product what are the advantages over a solent base UPVC Paint ? also is it sprayable ? thanks

Yes this is also sprayable, the advantages for this product over Technispray Kolorbond Original is that it can be applied by brush or roller as well as spray application. It is also lower odour.

Will this work on PVC panels? And can I order some sample colours please? Kind regards Hayley

This is suitable for application on to PVC in most forms be it panels or window frames etc - the recommended cleaners would need to be used to ensure adhesion of the product and that a warranty could be offered. We don't offer samples I'm afraid so you could either order the smallest size available in the product in the colours you are interested in or alternatively look at a RAL or BS colour chart to aid in choosing your desired colour.

Will this work on a composite front ,south facing door that get a lot of sunshine

Yes assuming the door is clean, dry, sound and prepared as detailed in the technical data sheet. This product also has a 5 year colour fastness guarantee.

Hi can technispray kolorbond aquatek be diluted with water and it so what percent. Thanks p

If required this can be diluted by 5% with clean water.

Spec states Aquatek can be used on wood. If spraying previously painted exterior wooden cladding, do I simply need to use the vinylkleen and window prep as usual?

Technispray Kolorbond Aquatek can be applied to primed or previously painted timber once it has been cleaned with Technispray Vinylkleen and lightly abraded making sure any loose and flaking paint is removed.

What surface area coverage should I expect per litre of Technispray Kolorbond Aquatek?

For spray application 1 ltr will cover approximately 10m² per coat.

Kolorbond Aquatek | uPVC, Metal & Wood Paint | 4900+ Colours | (Technispray)

Kolorbond Aquatek

Reference Tech5759

Brand Kolorbond

Search ID KOL5759

4,900+ Colours.
Single-pack water-based satin coating for interior and exterior use.
For uPVC, hard plastics, polyester powder coatings, GRP, and primed wood.
Resistant to scratches and weather.

Please note: Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colour.

- Chemically bonds with the surface - 10 year guarantee.
- Extremely colour stable - guaranteed to hold its colour, without excessive fading, for 5 years.

Important!

Performance and guarantees not valid without purchase and use of the relevant cleaning products.

Product customisation

Don't forget to save your customization to be able to add to cart

Colour Group

Size

Finish

Option

£52.20(incl. VAT)

£43.50(ex. VAT)

Quantity

Please choose your colour

Available for Delivery (See Delivery Options Below)

ColourPicker Explained

In general we sort colours for products into 2 main groups - ‘Ready Mixed’ and ‘Tinted’.
Tinted colours will always be more expensive than Ready Mixed colours as they need to be produced at the time of order using a tinting machine dispensing colourant into a base*.
During busy periods, this means that tinted colours could take longer, for example – a ready mixed colour ordered on a 3-5 day delivery might arrive within 3 days, however a tinted colour might take the full 5 days to arrive.

To find Ready Mixed colours, search "ready mixed" or select the Ready Mixed 'colour chart'. To see Tinted colours select a colour chart such as RAL, BS, NCS, etc. or search for a colour/hue to see available or related options.

To ensure fair pricing, we split colours into ‘Price Bands’ to group together similar priced colours. If you wish to search for the cheapest tinted colours, always select Price Band 1.

We make every effort to list all available colours, however we also offer a colour match service which can be accessed by contacting our Technical Team on 0113 245 5450 (option 2) or emailing [email protected]

*Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colour

Colour reproduction of the Products on the Site is limited by the technology used to deliver web pages and by the colour representation of Customer’s own monitor and computer set-up. We have made every effort to display as accurately as possible the colours of our Products but we cannot guarantee that the colour shown on Customer’s monitor’s display will accurately reflect the colour of the Product on delivery. We recommend that Customer first purchases the smallest Product available or access an industry standard colour chart in person (and not digitally) to ensure that the colour is acceptable for its purposes.

15 questions about the product

Description

Kolorbond Aquatek

Kolorbond Aquatek is a water-based, single-pack coating that offers a durable solution for both interior and exterior applications. Its formulation is based on high-performance polyurethane/acrylic resins, providing long-lasting protection and a professional satin finish. Available in 4,900+ colours, Aquatek is perfect for refurbishing or coating a variety of surfaces, including PVCu, polyester powder coatings, GRP, and primed wood.

Surface Preparation and Application

For optimal results, surfaces must be clean, dry, and free from contaminants. For new PVCu, thorough cleaning with Windowprep and light abrasion is recommended, while refurbishment projects should include additional cleaning with Vinylkleen. Application is straightforward with spray guns, but the product also allows effective brush application. Always ensure adequate drying between coats for a smooth, professional finish.

Performance and Durability

Tested to BS EN ISO4892-3: 2006, this product has passed accelerated weathering tests, proving its resistance to harsh exterior conditions. It remains flexible, preventing cracking even when applied to substrates that may bend. The coating offers exceptional scratch resistance, making it ideal for high-traffic areas and extended use. However, avoid using this product in conditions of low temperature or high humidity, as it can negatively affect adhesion and finish quality.

Dust dry in 15-20 minutes.
Hard dry after 24 hours.
Full adhesion and hardness achieved in 7 days.

Application Recommendations

This product is compatible with Technispray/Kolorbond products. Always avoid over-brushing and thinning with more than 5% water. For industrial use, force drying at 50°C can be employed to speed up the curing process. Refer to the downloadable data sheet for further details and recommendations.

Restrictions and Limitations

It is essential to avoid applying the coating in temperatures below 10°C or in high-humidity environments, as these conditions will impair drying and adhesion. The product should not be used on surfaces that are contaminated with grease, dirt, or other residues without proper cleaning. Additionally, do not apply in conditions where the temperature could drop, as this may impact the performance of the coating.

Health and Safety

The product is classified as a low-hazard material but may cause skin or eye irritation. Avoid prolonged exposure and use personal protective equipment where required. Care should be taken to avoid inhaling fumes during application. For transport, it is not classified as hazardous. Always refer to the MSDS for detailed safety information.

Product Details

Reference 5759-910384

Data sheet

Manufacturer: Kolorbond
Interior / Exterior Use: Interior & Exterior
Water / Solvent Based: Water
For Use On: uPVC
Hard Plastics
Powder Coatings
GRP
Wood
Sheen: Satin
VOC Levels: Ultra-Low (5-49 g/l)
Single, Two or Three Pack: Single
Pack Size: 1L
5L
20L
Application: Brush, Spray
Min. Application Temperature: 10°C
Solids by Volume: 38% +/- 2%
Shelf Life (from date of manufacture): 12 months Temperate; 6 months Tropical
UN Number: N/A
Fully Cured: 7 days at ambient temperatures
Viscosity: 3900-4500 mPa.s Brookfield 25C. 60rpm
Hard Dry: 24 hours
Dry to Handle: 40 minutes
Colour(s): Fully Tintable
Base Type: Water-Based
Suitable For Use On: UPVC
Suitable For Use On: Wood
Suitable For Use On: GRP Glass-Reinforced Plastic
Suitable For Use On: Hard Plastics
Suitable For Use On: Powder Coated Surfaces
Finish: Satin
Components: 1K
Usages: High Weather Resistance
Product Usage Type: Topcoat
Colour Family: White
Colour Family: Neutral
Colour Family: Anthracite Grey
Colour Family: Chartwell Green
Colour Family: Beige
Colour Family: Grey
Colour Family: Green
Colour Family: Blue
Colour Family: Red
Colour Family: Brown
Colour Family: Pink
Colour Family: Orange
Colour Family: Purple
Colour Family: Yellow
Colour Family: Black
Seasonal: Warm Weather

Attachments

Download

Aquatek Application Guide

Download

Aquatek 10 Year Guarantee

Download

Product Data Sheet

Download

Safety Data Sheet

Download

Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.

Questions

Question about the product

Name ^*

Email ^*

Question ^*

^* Required fields

I have read and agree to the conditions of use (read)

Nick on 2024-10-15 19:18:03	Question: Would this be any good to spray laminated kitchen cupboards and doors?
	Answer from Rawlins’ Technical Team: Assuming the surface is clean, dry, sound and prepared as detailed in the technical datsheet, you could consider this product. If spraying apply 2 coats allowing for the first to dry to touch before application of the second coat. This is available in your choice of 4900+ RAL, BS & NCS Colours to a Smooth or Textured finish. This product can be applied at the supplied viscosity, and can be thinned by 5% clean water if required. To ensure the substrate is prepared thoroughly, you could purchase Kolorbond UPVC Painting Kits, this comes with the Aquatek paint + preparatory equipment to ensure the cabinets are thoroughly prepared to give 10 year adhesion and 5 year colour fastness guarantee.

Bill on 2024-07-23 08:03:16	Question: Hi Can this be sprayed using a graco.ff 108 spray tip F
	Answer from Rawlins’ Technical Team: This product can be spray applied by Graco airless systems, however the manufacturer has advised using the ff108 tip gives a relatively narrow spray when applying to fascia boards and window profiles. Should a larger area be sprayed, a tip with a wider fan would be recommended in this instance.

Scott Macbeth on 2023-11-03 22:56:35	Question: Can this product be applied onto doors with mini rollers
	Answer from Rawlins’ Technical Team: Assuming the doors are bare upvc, they are clean, dry, sound and prepared as detailed in the technical data sheet this could be used. This can be mixed to many RAL, NCS or BS colours in a satin finish. This is also availble in the Kolorbond UPVC painting kits which also contain the required preparatory materials.

Rob on 2023-08-28 21:30:28	Question: Can I use this on UPVC that has already been painted?
	Answer from Rawlins’ Technical Team: Assuming the existing UPVC coating is clean, dry, sound, and prepared as detailed in the technical data sheet this product can be used. We would recommend to test on a small area for compatibility and adhesion prior to full application. This product is also available in a pack complete with the necessary prepatory materials Kolorbond UPVC Painting Kits

Peter Bushell on 2023-02-06 16:29:17	Question: Hello, can the UPVC paint be applied in colder weather conditions? Many thanks Pete
	Answer from Rawlins’ Technical Team: Unfortunately for application of this product the temperature for application and curing must be over 10°C. While the solvent based spray application only Kolorbond Original can be applied at 8°C it must also be over this for curing. Care must be taken to ensure moisture does not form on the service while curing.

Gavin on 2022-08-16 15:29:12	Question: Hi - can you supply this product in Valspar colours (X105R200B) or hex #62778A or RGB 98,119,138 Thanks
	Answer from Rawlins’ Technical Team: Unfortunately no, but it can be mixed to many RAL, NCS or BS colours with a satin finish.

David Wilson on 2022-08-04 14:17:55	Question: Can this paint be used on fin lock gutters, please?
	Answer from Rawlins’ Technical Team: Assuming you are looking to paint the outside of the fin lock gutters, they are upvc, clean, dry, sound and prepared as detailed in the technical data sheet yes. We also stock this product as part of a kit, including the required preparation materials. Kolorbond uPVC Painting Kits.

Elizabeth on 2022-05-18 19:23:45	Question: Do I need to use a primer underneath the paint? It’s an untreated pvcu door. Thank you.
	Answer from Rawlins’ Technical Team: No, a primer is not required when this is applied to clean, dry, sound and prepared UPVC. The two preparatory cleaners must be used prior to application. We do sell these products in a kit with the Aquatek. Kolorbond UPVC Painting Kits.

Ruth Savagar on 2022-05-09 09:35:52	Question: Can this paint be applied normally with a brush?
	Answer from Rawlins’ Technical Team: Yes this product can be applied by brush or spray application directly. For roller application you must add up to 20% Technispray KolorFlow to the paint. KolorFlow slows the drying of the paint, so can also be used to keep a wet edge when brushing or to prevent the paint from drying too fast on a hot day.

Paul on 2022-04-06 16:43:38	Question: Hi I see this is a water base product what are the advantages over a solent base UPVC Paint ? also is it sprayable ? thanks
	Answer from Rawlins’ Technical Team: Yes this is also sprayable, the advantages for this product over Technispray Kolorbond Original is that it can be applied by brush or roller as well as spray application. It is also lower odour.

Hayley Lee on 2021-10-22 17:23:25	Question: Will this work on PVC panels? And can I order some sample colours please? Kind regards Hayley
	Answer from Rawlins’ Technical Team: This is suitable for application on to PVC in most forms be it panels or window frames etc - the recommended cleaners would need to be used to ensure adhesion of the product and that a warranty could be offered. We don't offer samples I'm afraid so you could either order the smallest size available in the product in the colours you are interested in or alternatively look at a RAL or BS colour chart to aid in choosing your desired colour.

nigel on 2021-09-08 21:18:25	Question: Will this work on a composite front ,south facing door that get a lot of sunshine
	Answer from Rawlins’ Technical Team: Yes assuming the door is clean, dry, sound and prepared as detailed in the technical data sheet. This product also has a 5 year colour fastness guarantee.

Paul on 2021-09-07 13:36:22	Question: Hi can technispray kolorbond aquatek be diluted with water and it so what percent. Thanks p
	Answer from Rawlins’ Technical Team: If required this can be diluted by 5% with clean water.

Chris Harrison on 2021-08-03 10:50:26	Question: Spec states Aquatek can be used on wood. If spraying previously painted exterior wooden cladding, do I simply need to use the vinylkleen and window prep as usual?
	Answer from Rawlins’ Technical Team: Technispray Kolorbond Aquatek can be applied to primed or previously painted timber once it has been cleaned with Technispray Vinylkleen and lightly abraded making sure any loose and flaking paint is removed.

James on 2021-06-27 22:39:59	Question: What surface area coverage should I expect per litre of Technispray Kolorbond Aquatek?
	Answer from Rawlins’ Technical Team: For spray application 1 ltr will cover approximately 10m² per coat.

IMPORTANT SHIPPING & DELIVERY INFORMATION

Kolorbond Aquatek is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.

Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.

Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.

All delivery costs below are excluding VAT

Kolorbond WindowPrep

Alcohol-based colourless cleaner. For use on uPVC surfaces. Professional use only.

£21.60 (incl. VAT)

Shop now

In Stock and Available for Delivery

Kolorbond VinylKleen

Water-based cleaner for PVC and uPVC. Removes contaminants, silicones and oils. To be mixed with water. More Information Delivery Info

£21.60 (incl. VAT)

Shop now

In Stock and Available for Delivery

Kolorbond KolorFlow

For use with Kolorbond Aquatek to avoid leaving brush marks or to keep a ‘wet edge’ on a warm day. Stir in 10% of KolorFlow (maximum 20%). This will slow the drying of the paint and assist leveling. The addition of KolorFlow also assists when spraying in hot weather. More Info Delivery Info

£37.80 (incl. VAT)

Shop now

In Stock and Available for Delivery

Kolorbond uPVC Painting Kits

5,000+ Colours. Kit based around Kolorbond Aquatek. For uPVC windows, doors and fascias, as well as composite doors. Low odour, water-based. Please note: Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colour. Chemically bonds with the surface - 10 year guarantee....

£88.20 (incl. VAT)

Shop now

In Stock and Available for Delivery

Follow us on:

Kolorbond Aquatek

Kolorbond Aquatek

Product customisation

Your customization: Chosen Colour: BS 18 B 15 - White

Kolorbond Aquatek

Surface Preparation and Application

Performance and Durability

Application Recommendations

Restrictions and Limitations

Health and Safety

Data sheet

Aquatek Application Guide

Aquatek 10 Year Guarantee

Questions

Question about the product

IMPORTANT SHIPPING & DELIVERY INFORMATION

Kolorbond WindowPrep

Kolorbond VinylKleen

Kolorbond KolorFlow

Kolorbond uPVC Painting Kits