- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
- 5,000+ Colours.
- Two-pack polyurethane coating designed for industrial applications.
- For metals, GRP, and hard plastics.
- Matt, Satin, Semi-Gloss and Gloss finishes.
- Professional use only.
- Fire tested to: ISO 5658-2:2006+A1:2011; does not upgrade surface. Full report can be found in the Data Sheets tab below.
Please note: Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colour.
-
- Chemically bonds with the surface - 10 year guarantee.
- Extremely colour stable - guaranteed to hold its colour, without excessive fading, for 5 years.
Important!
- Performance and guarantees not valid without purchase and use of the relevant cleaning products.
Product customisation
Don't forget to save your customization to be able to add to cartDescription
Professional use only - from the 24th August 2023, adequate training is required before industrial or professional use of this product.
Should you require training, visit - https://www.safeusediisocyanates.eu/
Kolorbond K2
This two-pack polyurethane (PU) coating offers a highly durable finish suitable for a variety of industrial substrates. Designed specifically for professional use, it provides excellent adhesion and resistance to environmental stressors. Available in multiple gloss levels, the product is versatile enough for both aesthetic and functional applications.
Application and Coverage
The product is suitable for application on metals, GRP, and hard plastics. Prior to application, ensure the substrate is appropriately prepared by cleaning and abrading the surface. The recommended application method is by spraying; however, brush application is also possible with a brushable format. The product has a pot life of 2-3 hours at 20°C, allowing ample time for large projects. Full coverage can be achieved with a film thickness of 80 microns, ensuring a durable layer with just one application.
- Pot life: 2-3 hours at 20°C
- Dry to touch: 1 hour at 20°C
- Full hardness: 16 hours at 20°C (1 hour at 50°C with accelerator)
- Coverage: 14m² per litre at 30 microns
Surface Preparation
Surface preparation is critical to ensure the longevity and performance of the coating. Cast iron and steel should be abraded with 120 grit sandpaper, while GRP, aluminium, and hard plastics should be treated with 320 grit or Scotchbrite. Always degrease and clean surfaces thoroughly before applying the coating. If applying to glass, add the recommended G-pro additive for enhanced adhesion.
Limitations and Recommendations
Do not apply the product to surfaces that are not properly prepared, as this will impact adhesion and durability. Avoid use on flexible plastics or any substrates that may be subject to constant movement, as the rigid nature of the coating may cause cracking over time. The product should not be applied in temperatures below 5°C or above 35°C.
Health and Safety
- UN Number: 1263
This product contains isocyanates - Please refer to the highlighted warning above for training information. May cause irritation to the skin and eyes and can be harmful if inhaled. Always wear appropriate personal protective equipment, including gloves, eye protection, and respirators when applying the product. Avoid contact with the skin and avoid breathing vapours. For further safety information, always refer to the downloadable safety data sheet (MSDS).
Product Details
5782-900288
Data sheet
- Manufacturer
- Kolorbond
- For Use By
- Industrial Use
- Interior / Exterior Use
- Exterior Use
- Water / Solvent Based
- Solvent
- For Use On
- UPVC
GRP
Composite Doors
Mill
Aluminium
Stainless Steel
Hard Plastics
Cast Iron
Steel
Light Alloys
Galvanising
Phosphated Steel
Glass - Application Method
- Spray
- Sheen
- Matt
Satin
Semi-Gloss
Gloss - Single, Two or Three Pack
- Two-Pack
- Pack Size
- 6L Pack
30L Pack
1L
5L
20L - Mixing Ratio
- By volume: 5 parts base, 1 part hardener
- Mixing Ratio
- By weight: 7 parts base, 1 part hardener
- Application
- Spray
- Pot Life (at 20°C)
- 2 - 3 hours
- Coverage
- 14m2 per litre (30 micron dry film thickness)
- Recommended Thinner/Cleaner
- Gun cleaner
- Min. Application Temperature
- 10°C
- VOC
- 520-550 g/l (dependant on colour)
- Drying time
- At 20C: dust free: 1 hour
- Specific Gravity
- At 20C: Kolorbond K2 1.3 g/cm, K2 Hardener 1.0 g/cm
- Solids by Weight
- 60-65% (dependant on colour)
- Hard Dry
- At 20C: 16 hours, at 50C: 1 hour
- Flashpoint
- 23C (method ISO3679)
- Flash Time (Between Coats)
- 15 minutes
- Colour(s)
- Fully Tintable
- Base Type
- Solvent-Based
- Suitable For Use On
- Galvanising
- Suitable For Use On
- UPVC
- Suitable For Use On
- Aluminium
- Suitable For Use On
- Stainless Steel
- Suitable For Use On
- Steel
- Suitable For Use On
- Cast Iron
- Suitable For Use On
- Light Alloys
- Suitable For Use On
- Glass
- Suitable For Use On
- GRP Glass-Reinforced Plastic
- Suitable For Use On
- Mill
- Suitable For Use On
- Hard Plastics
- Suitable For Use On
- Phosphated Steel
- Suitable For Use On
- Composite Doors
- Finish
- Matt (10%)
- Finish
- Satin (30%)
- Finish
- Semi-Gloss (50%)
- Finish
- Gloss (70+%)
- Application Method
- Spray
- Manufacturer
- Kolorbond
- Components
- 1K
- Usages
- Abrasion Resistant
- Product Usage Type
- Topcoat
- Product Range
- K2
- Colour Family
- Blue
- Colour Family
- Red
- Colour Family
- Brown
- Colour Family
- Pink
- Colour Family
- Orange
- Colour Family
- Purple
- Colour Family
- Yellow
- Colour Family
- Black
- Colour Family
- White
- Colour Family
- Neutral
- Colour Family
- Anthracite Grey
- Colour Family
- Chartwell Green
- Colour Family
- Beige
- Colour Family
- Grey
- Colour Family
- Green
- Seasonal
- Cold Weather
- Seasonal
- Warm Weather
Questions
Question about the product
Mike
on
2022-08-31 14:20:29
| Question:
Hello, Is this paint solvent soluble? I previously used this product and the colour was wrong not on your behalf the customers instead. I have since had to locally source the correct white which has been made up in a one pack coat (techno grip) Kind regards Mike |
Answer from Rawlins’ Technical Team:
If the Kolorbond K2 Set has been allowed to fully cure then there should not be an issue with solvents affecting this. We would recommend contacting "Techno grip" for their advice on overcoating third party two pack products, an area to test for compatability may be required. | |
IMPORTANT SHIPPING & DELIVERY INFORMATION
Kolorbond K2 is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
You might also like
Kolorbond K2 Thinner
Thinner for use with Kolorbond K2 and the brush grade version Kolorbond DecoPro. More Info Delivery Info
Price
£21.60
(incl. VAT)
In Stock and Available for Delivery
Kolorbond K2 Accelerator
For use with Kolorbond K2 and the brush grade version Kolorbond DecoPro, two pack PU coatings which can be applied directly onto a variety of substrates including uPVC, metals, GRP and hard plastics. K2 Accelerator is used to accelerate the curing process of Kolorbond K2 and Kolorbond DecoPro when added at 2%. More Info Delivery Info...
Price
£57.60
(incl. VAT)
In Stock and Available for Delivery
Kolorbond WindowPrep
Alcohol-based colourless cleaner. For use on uPVC surfaces. Professional use only.
Price
£21.60
(incl. VAT)
In Stock and Available for Delivery
Kolorbond C425 Retarder
Clear solvent-based additive designed to extend the drying time of Kolorbond paint. Ideal for large panels or large surface areas during spray applications. Allows maintaining a wet edge during spray applications.
Price
£37.80
(incl. VAT)
In Stock and Available for Delivery
Kolorbond DecoPro
5,000+ Colours. Two-pack polyurethane (PU) coating. For metals, glass-reinforced plastic (GRP), and hard plastics. In multiple gloss levels (10%, 30%, 50%, and 70%). Professional use only. Fire tested to: ISO 5658-2:2006+A1:2011; does not upgrade surface. Full report can be found in the Data Sheets tab below. Please note: Colours are...
Price
£76.14
(incl. VAT)
In Stock and Available for Delivery