Osmo Concrete Oil is suitable for the clear impregnation of nearly all types of concrete (exposed concrete), artificial stone, screed as well as microporous natural stone with a polished, sanded or break surface as well as for unglazed tiles. Samples available.

Especially suited as wall panelling and flooring in the kitchen and bath as well as for tabletops, windows sills and kitchen worktops.

Clear, satin impregnation oil, which uniquely combines the advantages of natural oils and waxes in one product, does not form a film on the surface, instead it penetrates the surface. Through the impregnation with Osmo Concrete Oil, the microporous surface becomes water and dirt repellent as well as stain-resistant. Dust resulting from screed and concrete surfaces is greatly reduced.

Quick Links - Click To Jump To Section:

   
• Features & Benefits
• Notes

Features & Benefits

• Made from natural oils and waxes
• Microporous, breathable finish which does not crack, peel, flake or blister
• Highly water repellent
• Protects against dirt and wear
• Seals porous tile material ready for grouting – Always Trial Apply!
• Suitable for:
  • All types of interior concrete (exposed concrete)
  • Absorbent artificial Stone
  • Screed
  • Microporous, Natural Stone with a polished, sanded or break surface
  • Unglazed tiles
• Samples available

Notes

• The product will intensify the colour of the substrate (stone, concrete etc.)
• White or very light-coloured stone/surface may yellow slightly as result of the oil treatment!
• If used onto soft hand-made Terracotta floor tiles, Concrete Oil may not produce the high level of wax required for these tiles. Always speak to the tile manufacturer for finishing advice for softer floor tiles.
• For acid sensitive stones like marble and limestone, avoid prolonged contact with acidic liquids such as fruit juice, wine, cola, and vinegar. Prolonged contact with acidic substances can cause etching to acid sensitive surfaces.
• It is important to maintain surfaces and recoat as necessary, because on worn surfaces liquids like water and olive oil can penetrate and potentially stain tiles.
• Day to day cleaning is recommended using Osmo Spray-Cleaner.
• Pre-sealing of absorbent tiles prior to grouting might be possible. We highly recommend a trial is carried out first to ensure coloured grouts do not stain the tile.
  • Please ensure that the tiles are completely dry before using Osmo Concrete Oil.
  • We highly recommend allowing at least 7 days for newly laid tiles to release moisture from adhesives before sealing.
  • Very porous surfaces my require 2 x thinly applied coats of Osmo Concrete oil prior to grouting.
  • Following application of Osmo Concrete Oil, remove all excess product from the surface and allow 24 hours for each coat to dry before grouting.
  • Following grouting, the fully dried and cured grout can then be sealed with one thinly applied coat of Osmo Concrete Oil.