- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
- Available in red.
- Alkyd-based anti-corrosive primer and finish.
- Glossy finish, can be overcoated.
- Protects metal surfaces from rust and corrosion.
- For structural steel, general metalwork, tanks, iron gates, and pipes.
Coo-Var Anti-Corrosive Red Oxide
This anti-corrosive primer and finish is a versatile, single-component solution for protecting metal surfaces from rust and corrosion. Ideal for use on steel, iron, and other metalwork, it creates a tough, durable barrier that prevents degradation, even in harsh environments. Available in a striking red colour, it delivers a gloss finish that can be left as a standalone coat or overcoated for extra durability.
Recommended Uses
Perfect for use on a range of metal surfaces, including structural steel, tanks, iron gates, and pipes. Whether you're working on a commercial project or general metalwork, this product provides a strong, durable finish that withstands the elements. It is especially effective on steel surfaces where rust prevention is critical, and its application is simple with either a brush, roller, or spray.
Application and Preparation
For optimal results, ensure the surface is clean, dry, and free from contaminants like grease, oil, or rust. Blast cleaning is recommended for steel surfaces, but mechanical cleaning can also be effective if blasting is not possible. Once the surface is prepared, apply the product using a brush, roller, or spray gun. It dries to the touch in approximately 12 hours and can be overcoated after this period if desired.
- Application methods: brush, roller, or spray
- Drying time: touch dry in 12 hours, full hardness in 5-7 days
- Overcoating interval: 12 hours or overnight
Limitations and Restrictions
This product should not be applied in conditions where humidity is high, or the temperature is below the dew point, as this may affect adhesion and drying time. It is also important to avoid using the product on non-metal surfaces, or where strong acids or oxidising agents are present. Additionally, do not apply in confined spaces without proper ventilation due to the VOC content and flammability of the product. Always refer to the downloadable data sheet for detailed information on application conditions and safety precautions.
Recommended Products
For additional protection, particularly in highly corrosive environments, consider using Coo-Var Zinc Phosphate Primer as a base coat before applying this product. For areas that require a different finish or colour, Coo-Var offers a range of topcoats that are compatible with this anti-corrosive primer.
Health and Safety
- UN number: 1263
Contains flammable liquid and vapour. Avoid skin contact and inhalation of fumes. Wear protective clothing and work in a well-ventilated area. The product may cause drowsiness or dizziness, and repeated exposure can lead to skin dryness or cracking. Always dispose of containers safely and follow local regulations.
Data sheet
- Manufacturer
- Coo-Var
- For Use By
- Consumer Use
- Water / Solvent Based
- Solvent
- For Use On
- Steel, Iron, Metal
- Application Method
- Brush, Roller, Airless Spray
- Sheen
- Gloss
- Single, Two or Three Pack
- Single
- Pack Size
- 250ml, 500ml, 1L, 2.5L, 5L
- Touch Dry (at 20°C)
- 5 hours
- Dry to Recoat (at 20°C)
- 12 hours
- Coverage
- 13m² per litre
- Recommended Thinner/Cleaner
- Thinners 14
- Solids by Volume
- 49%
- Touch Dry
- 5 Hours
- Recommended Dry Film Thickness
- 35-40 microns
- Recommended Wet Film Thickness
- 75 microns
- UN Number
- UN1263
- Base Type
- Solvent-Based
- Suitable For Use On
- Metal
- Suitable For Use On
- Steel
- Suitable For Use On
- Iron
- Suitable For Use On
- Structural Steel
- Suitable For Use On
- Pipes
- Suitable For Use On
- Tanks
- Suitable For Use On
- Iron Gates
- Suitable For Use On
- Primed Surfaces
- Finish
- Gloss
- Application Method
- Spray
- Application Method
- Brush
- Application Method
- Roller
- Usages
- Atmospheric
- Usages
- Anti-Corrosive
- Usages
- Primer/Finish
- Usages
- Direct to Metal
- Product Usage Type
- Primer
- Colour Family
- Red
- Product Type
- Alkyd
- Environment
- Atmospheric
- Touch Dry/Dust Free (@ 20-25°C)
- 5 hours
- Product Attributes
- Anti-Corrosive
- Product Attributes
- Primer/Finish
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Coo-Var Anti-Corrosive Red Oxide is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
Teamac Thinner 14
Clear hydrocarbon solvent. For thinning and cleaning down Teamac products. For marine paints, metal coatings, and similar surfaces.
Coo-Var Universal Degreaser Cleaner
Clear universal degreaser/cleaner. Removing grease and oil patches from multiple surfaces. Suitable for use on floors, walls, metals, and interior/exterior surfaces.
Coo-Var Zinc Phosphate Primer
Modified alkyd metal primer. Anti-corrosive protection on iron and steel, available in red and grey colours. For iron, steel, aluminium, and combined wood and metal structures, including fire escapes, metal gates, and garage doors.
General Painting Application Kit
Provides the basics for any painting project. Whether it is a one off job, or you just want to make sure the right application tools get to site. Provides an economical way of making sure you will have what you need Ideal for interior and exterior paint projects, including uPVC surfaces, walls, ceilings, and more. Click to jump down to...
Surface Preparation Kits for Steel
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools) 1 x Rust-Oleum...