Glixtone AC1 High Performance Smooth Masonry Paint is a high performance, water-borne, exterior coating with outstanding anti carbonation properties. For use as a weather-resistant protective and decorative finish for concrete, cement render, most masonry surfaces, and metals with a suitable primer.

Glixtone AC1 High Performance Smooth Masonry Paint is formulated to the very highest standards for durability and cost effectiveness and enhances the exterior appearance of buildings, whilst providing an exceptional level of protection from the elements.  Suitable for harbour buildings, seafront housing, hotels, marina walls, boatyards and any area susceptible to extreme weather or carbon pollution.

With up to 30 years life expectancy and outstanding resistance to weathering and UV, Glixtone High Performance Smooth Masonry Paint offers a long lasting environmentally friendly protective finish.

Glixtone High Performance Smooth Masonry Paint is available in White and 1,600+ colours, inc. RAL, RAL Design, BS, NCS & the new NCS 2050 colours.

Please Note - This product is also available in 10L and 20L sizes subject to Minimum Order Quantities and extended lead times as below:

• 10L - Minimum Order Quantity 180L - Ext. lead time 14-21 Working days
• 20L - Minimum Order Quantity 160L - Ext. lead time 14-21 Working days

Please contact our Sales Department on 0113 2455450 (option 1) or send a message to [email protected] for details.

Quick Links - Click To Jump To Section:

   
• Features & Benefits
• Application
• Performance
• Limitations

Features & Benefits

   
• Up to 30 years life expectancy
• Environmentally friendly, water-borne formulation
• Smooth Finish, with a slight sheen
• Excellent opacity: easy to apply
• Tested to BS 476 Parts 6 and 7 and meets Class ‘0’
• Outstanding CO² and other acid gas resistance
• Elastomeric and exceptionally flexible - moves with the substrate
• Dirt repellent and resistant to fungal growth, with excellent salt, alkali and acid resistance
• Waterproof, blister proof and protects against oil and grease
• Bright white colour is non-yellowing and enhances lux values
• Excellent R value at low film build
• Available in 1,600+ colours, inc. RAL, RAL Design, BS, NCS & the new NCS 2050 colours
• For detailed information please see the Product Data Sheet and Safety Data Sheet

Application

Surface Preparation:

• Remove all flaking and loose material back to a sound surface
• Make good any defective surfaces and leaking rainwater goods
• Ensure all surfaces are clean, dry and firm
• If there is organic growth: Remove with a stiff bristle (not wire) brush and apply a liberal coat of Glixtone Fungi-Shield Sterilising Solution
• If the surface is chalky or friable: Apply Glixtone Weatherproof Primer/Sealer: RS2

Application:

• Stir thoroughly before use
• Apply two coats by brush, roller or spray
• Ensure first coat is fully dry before applying second coat*

*Drying times are dependent upon weather conditions and average temperature. Usually dry and re-coatable in approximately 2-4 hours. Drying will be retarded in conditions of high humidity.

Performance

CO² Permeability:

• (µ) value =2.410.000
• Air diffusion equivalent: R = 301 metres (at 125 micron dry film thickness)
• Test Certificate No. 2775*

Moisture Vapour Permeability:

• 83.45 g/m2/24 hrs. So (m) = 0.533 (at 146 micron dry film thickness)
• Test Certificate No.2759*

Accelerated Weathering:

• 16,000 hrs. (equivalent to 32-33 years external weathering)
• Test certificate No. 4759*

Fire:

• Class 1 to BS476: Part 7 (LPC Report TE80640)
• BS 476: Part 6 - Index of Performance (I) = 5, Sub-index (l1) = 0.3 LPC Report TE80636
  
• Designated Class 0 as defined in the Building Regulations E15 (I) (e)

Limitations

• Do not apply when there is a risk of rain or frost
• Do not apply when during excessively damp conditions
• Do not apply when the temperature is below 5°C
• Please refer to the Safety Data Sheet before use for detailed health and safety information

IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contacted to obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and Conditions and should be applied only by an individual with the necessary expertise and experience. We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.