- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Osmo UV-Protection-Oil Tints, a transparent, lightly pigmented and satin, natural oil based wood finish for exterior use. Ideal for all vertical wood surfaces in outdoor areas: doors, windows, window shutters (dimensionally stable elements), carports, timber cladding, balconies, fences, pergolas, and summer houses (dimensionally unstable elements).
- Very water and dirt resistant - Reduces wood swelling and shrinkage
- Microporous, penetrating finish which does not crack, peel or flake
- No sanding necessary when topping up coating
- Resists growth of algae, mildew and fungal - Enhances the natural character of the wood
- Two-coat application; 2nd coat can also be UV-Protection-Oil Extra Clear
- More benefits and suitable wood types below
- Larger sizes available - minimum quantities and longer lead times may apply, contact us for more information
- Samples available
Osmo UV-Protection-Oil Tints is ideal for all vertical wood surfaces in outdoor areas: doors, windows, window shutters (dimensionally stable elements), carports, timber cladding, balconies, fences, pergolas, and summer houses (dimensionally unstable elements). Also suitable for bamboo poles (e.g. in screens). Samples available.
Transparent, lightly pigmented and satin, natural oil based wood finish for exterior use. Microporous surface allows the wood to breathe and reduces swelling and shrinkage. Water-repellent, will not crack, peel or flake.
As top coat on already colour treated wood, Osmo UV-Protection-Oil Tints prolongs the renovation intervals significantly. As a single product application, it blocks the greying process on vertical surfaces with a UV protection factor 12 in comparison to untreated wood when two coats are applied.
Osmo UV-Protection-Oil Tints is furnished with active ingredients to protect the coating against mould, algae and fungal attack. Simply apply without sanding. Easy and seamless application. Finish stays workable while coating.
Quick Links - Click To Jump To Section:
Features & Benefits
- Very water and dirt resistant
- Microporous, penetrating finish which does not crack, peel or flake
- No sanding necessary when topping up coating
- Reduces wood swelling and shrinkage
- Resists growth of algae, mildew and fungal
- Enhances the natural character of the wood
- Ideal for all vertical wood surfaces in outdoor areas
- Doors, windows, window shutters (dimensionally stable elements), carports, timber cladding, balconies, fences, pergolas, and summer houses (dimensionally unstable elements). Also suitable for bamboo poles (e.g. in screens)
- Developed to maintain the wood’s natural wetted colour and slow the greying process by (UV factor) 12 times in comparison to untreated wood
- Samples available
Finishes & Examples
Suitable & Recommended Wood Species
Recommended:
For all other wood types not specified, always trial apply.
- Oak: UV-Protection Oil Tints 425 Oak (for a darker shade) and 429 Natural (for a lighter shade) are optically suitable.
- Beech
- Ash
- Alder
- Birch
- Thermowood and Thermally Modified Timber (TMT): prone to grey very fast and therefore application of a tint/colour is recommended within the first two weeks after processing. Always trial apply the tint/colour to reach a harmonious colour tone with Thermowood / TMT.
Also Recommended:
For the following wood types, WR Base Coat is recommended before use.
- Douglas Fir: UV-Protection Oil Tints 427 Douglas Fir is optically suitable.
- Pine: UV-Protection Oil Tints 424 Spruce is optically suitable.
- Spruce: UV-Protection Oil Tints 424 Spruce is optically suitable.
- Accoya
- Kebony
Recommended After Weathering Period:
For the following ingredient rich wood species, a weathering period is recommended to improve absorbency. New or freshly sanded ingredient rich wood requires at least 12 weeks exposure to the exterior elements ( unless otherwise stated below) before application.
After the weathering period, it’s generally recommended to de-grey the bare surface with Osmo Wood Reviver Power-Gel, damp rinse, then clean the surface from the extractive content before application, always trial apply!
For all other ingredient-rich hardwood species not mentioned, please contact us for further information.
- Cedar: UV-Protection Oil Tints 428 Cedar is optically suitable.
- Iroko
- Mahogany
- Teak
- Walnut
- Ipe
- Merbau
- Wenge
- Rosewood
- Sycamore
- Sapele: 3-4 weeks exposure
- Larch: 2 weeks exposure. Application of WR Base Coat is recommended before use. Then, UV-Protection Oil Tints 426 Larch is optically suitable.
Not Recommended:
- Green Oak: moisture content is often above the maximum 20% recommended.
- Idigbo: contains yellow dyes which leaches when the wood becomes wet and stains when in contact within iron.
- Flat surfaces: such as decking, window sills, garden tables, seats, benches and other joinery whereby rain is able to remain on the surface for long periods of time.
- UV-Protection Oil Tints 429 Natural: not recommended for use on ingredient-rich (dark/reddish) wood species because it is visible as slightly white chalky surface. Remove white pigments from surface before leaving to dry. A trial application is always recommended.
- Other: woods treated with a varnish, lacquer or other surface coatings must be completely sanded before use.
Notes & Tips
- Stir well using a flat stirring stick or spatula. Failure to mix the colour and all ingredients could lead to an increased patchiness.
- Ideally the new surface will be finished to a final P120 grit sand paper grade. This is the optimal grade for applying Osmo UV Protection-Oils.
- For ingredient-rich wood species (eg: Cedar, Iroko, Teak, Mahogany etc.), please allow 12 weeks weathering prior to application. Weathering will improve absorbency for the Osmo product to penetrate in to the wood. If the wood has greyed after weathering, use Osmo Wood Reviver Power Gel to refresh the colour once more. Avoid refreshing colour through sanding as this will reveal fresh wood ingredients, and the surface will need to be weathered once more.
- Osmo UV Protection-Oil Tints 429 Natural is not recommended for use on ingredient-rich (dark/reddish) wood species because it is visible as slightly white chalky surface. A trial application is always recommended
- Over application of Osmo UV Protection-Oil Tints 429 Natural may lead to the inherent white pigments becoming visible. Remove excess white before allowing the surface to dry.
- UV-Protection Oils perform optimally on vertically structured timber. For horizontal sections there will be more maintenance. On horizontal sections, ensure at least a 15 degree angle to facilitate water run-off. Sharp edges must be rounded (radius > 2 mm).
- Over application and/or low ventilation can increase the drying times.
- UV rays from the sun help to break down protective lignin surrounding the fibres in the wood. Moisture also helps to deplete the lignin and the wood fibres begin to grey naturally. Osmo UV-Protection Oils delay the greying effect 12 x more effectively than bare timber.
- Osmo UV-Protection-Oil Tints are furnished with active biocides to help protect the film coating against the effects from mould, algae and fungal attack. The added biocides do not prevent mould, algae and fungal growth forming on the coating.
- Some timbers like Oak and Chestnut are notoriously rich in natural tannins and these ingredients can blacken surfaces when exposed to moisture, sunlight and iron oxides (eg from wire wool). Horizontal sections are more prone to discolouration whereby moisture can accumulate then escape through a breathable coating like Osmo. As the moisture escapes it lowers the risk of warping however, natural tannins can migrate to the surface and cause some staining. To help reduce this, try to clean the first signs of tannin spots away from the coating with a damp cloth. Over time, the tannins will deplete and the discolouration will be less problematic. Choosing a darker coloured Osmo UV-Protection oil tint can also help to mask discolouration.
- Many wood species (eg Larch) contain water-soluble coloured extractives which may leach out naturally when weathered. Bare weathered wood can often be refreshed using Osmo Wood Reviver Power Gel prior to treatment. Always trial apply first.
Data sheet
- Manufacturer
- Osmo
- Interior / Exterior Use
- Exterior Use
- Water / Solvent Based
- Hybrid
- For Use On
- Exterior Wooden Doors
Windows
Wooden Window Shutters
Carports
Timber Cladding
Balconies
Wooden Fences
Pergolas
Summerhouses
Bamboo Poles - For Use On
- Oak
Pine
Rosewood
Sapele
Spruce
Sycamore
Teak
Thermally Modified Timber (TMT)
Thermowood
Wenge - For Use On
- Accoya
Alder
Ash
Beech
Birch
Cedar
Douglas Fir
Garapa
Ipe
Iroko
Kebony
Larch
Mahogany
Merbau - Application Method
- Brush
Roller - Sheen
- Satin
- Single, Two or Three Pack
- Single
- Pack Size
- 750ml
2.5L - Coverage
- 18m²/L per coat
- Recommended Thinner/Cleaner
- Osmo Brush Cleaner
- VOC
- 400g/L
- Shelf Life (from date of manufacture)
- Up to 5 years
- Drying time
- Approx. 12 hours (normal climatic conditions, 23 °C/ 50 % rel. humidity)
- Specific Gravity
- 0.9-1.0 g/cm³
- Viscosity
- 50s DIN EN ISO 2431/3 mm, viscid
- Flashpoint
- 60 °C acc. DIN EN ISO 2719
- Colour(s)
- Standard Colours
- Base Type
- Hybrid
- Suitable For Use On
- Windows
- Suitable For Use On
- Timber Cladding
- Suitable For Use On
- Carports
- Suitable For Use On
- Summerhouses
- Suitable For Use On
- Wooden Shutters
- Suitable For Use On
- Balconies
- Suitable For Use On
- Wooden Fencing
- Suitable For Use On
- Pergolas
- Suitable For Use On
- Exterior Wooden Doors
- Suitable For Use On
- Bamboo Poles
- Finish
- Satin
- Application Method
- Roller
- Application Method
- Brush
- Manufacturer
- Osmo
- Product Usage Type
- Wood Finish
- Product Range
- UV-Protection
- Type of Wood Finish
- Wood Paint
- Colour Family
- Beige
- Colour Family
- Brown
- Wooden Surfaces
- Iroko
- Wooden Surfaces
- Kebony
- Wooden Surfaces
- Larch
- Wooden Surfaces
- Mahogany
- Wooden Surfaces
- Merbau
- Wooden Surfaces
- Oak
- Wooden Surfaces
- Pine
- Wooden Surfaces
- Accoya
- Wooden Surfaces
- Rosewood
- Wooden Surfaces
- Alder
- Wooden Surfaces
- Sapele
- Wooden Surfaces
- Ash
- Wooden Surfaces
- Spruce
- Wooden Surfaces
- Beech
- Wooden Surfaces
- Sycamore
- Wooden Surfaces
- Birch
- Wooden Surfaces
- Teak
- Wooden Surfaces
- Thermally Modified Timber (TMT)
- Wooden Surfaces
- Cedar
- Wooden Surfaces
- Thermowood
- Wooden Surfaces
- Douglas Fir
- Wooden Surfaces
- Wenge
- Wooden Surfaces
- Garapa
- Wooden Surfaces
- Ipe
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Osmo UV-Protection-Oil Tints is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
Osmo UV-Protection Oil
Osmo UV-Protection-Oil is ideal for all vertical wood surfaces in outdoor areas: doors, windows, window shutters (dimensionally stable elements), carports, timber cladding, balconies, fences, pergolas, and summer houses (dimensionally unstable elements). Clear UV Protection Oil 410 is safe for humans, plants and animals when dry Clear UV...
Osmo WR Base Coat
Osmo WR Base Coat, a wood preservative for amateur use against wood rotting fungi, wood staining fungi and wood destroying insects on all outside wood which is out of direct ground contact and/or surface water. Extremely water repellent - Resistant to blue stain, rot and insect attack Reduces wood swelling and shrinkage - No future...
Osmo Wood Reviver Power Gel
For refreshing greyed exterior wood surfaces. Ideal for decking, timber cladding, garden furniture and similar surfaces. Restores the tone of unweathered wood. Odourless and biodegradable. Easy to apply – especially on vertical surfaces. Removes grey patina. Also part of the Osmo Garden Furniture Maintenance Kit. Larger sizes...
Osmo Tools & Accessories
Osmo Tools and Accessories - Choose from a selection of hand tools, kits and cleaning products you'll need for applying Osmo Wood Finishes. See further below for the full list of tools & accessories available. More Information Delivery Info
Osmo Brush Cleaner & Thinner
Osmo Brush Cleaner and Thinner, a premium quality brush cleaner and thinner that is more effective than cheaper alternatives at cleaning and thinning solvent-based products. Effective at cleaning solvent-based products from brushes and rollers Helps promote longevity of the bristles and fibres of brushes and rollers Perfect for removing...