- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
- Available in 9 attractive colours.
- Ready-mixed floor coating for anti-slip protection.
- For concrete, wood, metal, and GRP.
- Interior or exterior use.
Coo-Var Suregrip - Superior Anti-Slip Floor Paint
Designed to provide safety, durability, and aesthetic appeal. This ready-mixed floor coating is perfect for various applications where a sure foothold is necessary, such as boats, steps, stairways, disabled ramps, doorways, and machinery areas. Suitable for both indoor and outdoor environments.
Features and Benefits:
- Variety of Colours: Choose from a wide range of colours including Blue, Red, Green, Black, Grey, White, Light Grey, and Safety Yellow to match your specific needs and preferences.
- Multi-Surface Application: Suregrip is engineered for use on suitably prepared concrete, wood, metal, and GRP, making it an ideal choice for various surfaces.
- Durable and Protective: Provides long-lasting protection and decoration, ensuring that your surfaces remain safe and visually appealing over time.
- Indoor and Outdoor Use: Versatile enough to be used in both indoor and outdoor settings, making it suitable for a range of environments and conditions.
- Anti-Slip Finish: Offers a rough, anti-slip finish when dry, significantly reducing the risk of slips and falls in areas prone to moisture and other slippery substances.
- High Performance: Suitable for foot traffic, light truck traffic, and occasional heavy truck traffic, demonstrating its robustness and reliability under different types of use.
Application Instructions:
- Surface Preparation: Ensure all surfaces are clean, dry, and free from contaminants. Concrete surfaces should be roughened to provide a good key for the paint. New concrete must be allowed to cure for up to three months.
- Priming: Apply a 10% thinned coat of Coo-Var Floor Paint to prime and seal concrete surfaces. Use appropriate primers for other substrates like wood and metal.
- Mixing: Stir well before use. Do not use a mechanical shaker.
- Application: Apply using a brush or short/medium roller. Ensure adequate ventilation during application and drying, especially in confined spaces.
- Drying Time: Minimum recoat interval is 16 hours. Full hardness is achieved in 5-7 days under recommended conditions.
Restrictions and Limitations:
- Not suitable for use on unprepared or unprimed surfaces.
- Ensure proper ventilation in confined spaces during application and drying.
- Avoid thinning the paint.
- Not recommended for use in conditions of high humidity or low temperature, as this can adversely affect the application, drying, and performance.
Health and Safety Information:
Coo-Var Suregrip is a flammable liquid and should be handled with care. Always use personal protective equipment such as gloves and safety glasses during application. Ensure good ventilation and avoid inhalation of vapours.
- UN Number: 1263
- Safety Information: Contains flammable components; avoid ignition sources. Hazardous to the aquatic environment. Use with adequate ventilation.
SureGrip provides the perfect blend of safety, durability, and aesthetic appeal for a wide range of applications. Whether you need a reliable solution for your home, boat, or industrial setting, Suregrip ensures that you have a trusted anti-slip surface.
Data sheet
- Manufacturer
- Coo-Var
- Interior / Exterior Use
- Interior & Exterior
- For Use On
- Concrete, Wood, Tarmac, Stone, Brickwork, Metal
- Application Method
- Brush, Roller
- Single, Two or Three Pack
- Single
- Pack Size
- 2.5L, 5L
- Base Type
- Organic Solvents (see safety sheet for details))
- Touch Dry (at 20°C)
- 6 hours
- Coverage
- 6-10m² per litre
- Recommended Thinner/Cleaner
- Do Not Thin
- Solids by Volume
- 60%
- Touch Dry
- 6 Hours
- UN Number
- UN1263
- Base Type
- Solvent-Based
- Suitable For Use On
- Ramps
- Suitable For Use On
- Wood Steps
- Suitable For Use On
- Metal Steps
- Suitable For Use On
- Metal
- Suitable For Use On
- GRP Floors
- Suitable For Use On
- Concrete
- Suitable For Use On
- GRP Glass-Reinforced Plastic Floors
- Suitable For Use On
- Wood
- Suitable For Use On
- Car Pits
- Suitable For Use On
- GRP Glass-Reinforced Plastic
- Suitable For Use On
- Machinery Areas
- Suitable For Use On
- Concrete Floors
- Suitable For Use On
- GRP Steps
- Suitable For Use On
- Coated Surfaces
- Suitable For Use On
- Disabled Ramps
- Suitable For Use On
- Concrete Ramps
- Suitable For Use On
- Doorways
- Suitable For Use On
- Concrete Steps
- Suitable For Use On
- Boat Decks
- Suitable For Use On
- Metal Floors
- Suitable For Use On
- Steps
- Suitable For Use On
- Walkways
- Suitable For Use On
- Stairwells
- Suitable For Use On
- Wood Floors
- Finish
- Anti-Slip
- Application Method
- Brush
- Application Method
- Roller
- Components
- 1K
- Product Usage Type
- Anti-Slip
- Product Range
- Suregrip
- Fastest Delivery
- Next Working Day
- Colour Family
- Grey
- Colour Family
- Green
- Colour Family
- Blue
- Colour Family
- Red
- Colour Family
- Yellow
- Colour Family
- Black
- Colour Family
- White
- Anti-Slip Texture
- Coarse Texture
Questions
Question about the product
Dave on 2023-10-04 12:38:33 | Question:
I am looking for a waterproof paint for a shower floor the current floor is like a moulded vinyl type which goes up about 75mm on the wall it’s too much work stripping it out as it’s still waterproof but I want to change the colour from blue to grey |
Answer from Rawlins’ Technical Team:
This product wouldn't be suitable for this application type, as the aggregate is quite harsh and wouldn't be comfortable to walk on in bare feet. Due to vinyl being quite flexible, the paint would likely crack and have trouble adhering to the shiny, un-porous surface. Assuming the vinyl is clean, dry, sound, abraded to achieve a surface profile and solvent wiped with a methylated spirit prior to application, as an alternative you could consider Smartkote Safekote in a range of available colours, with a preceeding coat of Smartkote Clear Primer Treatment to provide adhesion for the topcoat to adhere to. We'd recommend to test for compatibility and adhesion on a small test area firstly prior to full application. | |
Iksan on 2021-12-07 15:21:28 | Question:
I need anti slip paint over galvanized steel drainage covers on a walkway which is in constant use (foot traffic). Will this be a suitable paint for it? What is the expected durability of this product? |
Answer from Rawlins’ Technical Team:
Assuming the galvanised covers are clean, dry, sound and prepared as detailed in the technical data sheet this paint will be suitable. The covers must be treated first with Teamac Mordant Solution (T Wash), then one coat of Coo-Var Zinc Phosphate Primer should be applied. Coo-Var Suregrip Anti-Slip Floor Paint is suitable for areas exposed to foot traffic and light truck traffic. The life span of the product will depend on the level of traffic. | |
stuart barratt on 2021-11-30 11:29:26 | Question:
what is the lowest temperature i can use the floor paint please |
Answer from Rawlins’ Technical Team:
Thank you for the enquiry, we would recommend application when substrate temperatures are above 5°C. | |
Graham on 2021-10-22 11:37:39 | Question:
Hi, I have the Anti-slip paint and was wondering if I can use it on outside floor tiles on the steps to my house |
Answer from Rawlins’ Technical Team:
Coo-Var Prime-All would be the recommended primer for use on tiles prior to the application of Coo-Var Suregrip. | |
Mark on 2021-08-06 16:02:28 | Question:
When you say “a 10% thinned coat of paint” I’m assuming you mean a coat consisting of 90%paint and 10% thinner or is it the other way round ? |
Answer from Rawlins’ Technical Team:
Depending on the substrate, Coo-Var Floor Paint can be used as a primer thinned 10% with Teamac Thinner 14. 1ltr of paint should have 100ml of thinners mixed in. | |
Lucy on 2020-05-07 16:30:09 | Question:
What product is best to clean equipment after this suregrip paint has been applied? E.g. cleaning brushes and rollers? |
Answer from Rawlins’ Technical Team:
For cleaning brushes and rollers after application we can recommend Thinner 14. | |
nigel statton on 2019-11-08 15:15:25 | Question:
i am looking for an anti slip coating to apply to drain covers in a school walkway that is used infrequently |
Answer from Rawlins’ Technical Team:
Coo-Var Suregrip Anti-Slip Floor Paint would be suitable for this application but assuming the covers are currently bare, ferrous metal they would need first priming with Coo-Var Zinc Phosphate Primer. | |
matthew white on 2019-09-24 11:40:19 | Question:
do we need primer for this paint |
Answer from Rawlins’ Technical Team:
Coo-Var Penetrating Wood Primer on wood, Coo-Var Zinc Phosphate Primer on ferrous metals, 10% thinned Coo-Var Floor Paint or Coo-Var Alkali Resisting Primer Sealer on concrete. | |
Dalco Services on 2019-05-28 08:29:38 | Question:
Need a safety yellow anti slip paint to mark edges of metal stairs in a school - is the Suregrip Coo Var anti slip floor paint bright "yellow enough" to be seen? |
Answer from Rawlins’ Technical Team:
As a guide, the yellow Coo-Var Suregrip Anti-Slip Floor Paint is available in is close to BS 4800 08 E 51. | |
Mary Carver on 2019-04-16 12:36:45 | Question:
Do you supply sample pots of light and dark grey please Mary |
Answer from Rawlins’ Technical Team:
Sample pots of this product are not available but we do have dry samples that we can post if you can provide an address to our sales team. | |
Brenda on 2018-02-17 16:29:16 | Question:
Have slopping concrete steps leading up to house what is the best paint to make them look better. |
Answer from Rawlins’ Technical Team:
All surfaces should be clean, dry, sound and free from contaminants. Concrete - power floated, granolithic and smooth surfaces should be roughened first to provide a good "key" for the paint. This can be done mechanically by abrading or blasting, or chemically using Coo-Var Acid Etch. These processes will have the advantage in addition to preparing the surface of also removing dirt and laitance. New concrete must be allowed to cure thoroughly which can take up to 3 months. Apply a 10% thinned coat of Coo-Var Floor Paint to prime and seal the surface prior to applying Coo-Var Suregrip. | |
Ron Hughes on 2017-11-15 17:41:09 | Question:
Do you need to use a primer before using coo var outdoor anti slip paint
|
Answer from Rawlins’ Technical Team:
Use Coo-Var Penetrating Wood Primer on wood, Coo-Var Zinc Phosphate Metal Primer on ferrous metals, 10% thinned Coo-Var Floor Paint or Coo-Var Alkali Resisting Primer on concrete. | |
Dean French on 2017-06-26 10:04:40 | Question:
Please would you tell me what the finish is like on the Coo Var Sure Grip Anti slip paint is - is it satin, semi gloss or something else please?
thanks
Dean French |
Answer from Rawlins’ Technical Team:
It is a matt, aggregated finish. | |
Azurey on 2016-04-06 10:31:18 | Question:
Is the non slip surface very rough. I have a 75' length garden where I throw a ball for my dog to run back and forth to me. Would the non slip be too rough on her paws ? also is it easy to clean and sweep off leaves etc. |
Answer from Rawlins’ Technical Team:
It is a coarse anti-slip finish which can make it tough to clean. If you're looking for something less aggressive we would recommend Rust-Oleum Tarmacoat. | |
Norma burns on 2016-01-13 08:48:44 | Question:
How many coats of Coo-Var Suregrip Anti-Slip Floor Paint should I apply on an exterior surface to give maximum protection? |
Answer from Rawlins’ Technical Team:
Bare surfaces should first be cleaned, prepared and primed as follows; Coo-Var Penetrating Wood Primer on wood, Coo-Var Zinc Phosphate Primer on ferrous metals, Coo-Var Floor Paint (thinned 10%) or Coo-Var Alkali Resisting Primer Sealer on concrete. Once suitably primed, apply 2 coats of Coo-Var Suregrip Anti-Slip Floor Paint in the desired colour at 6-10m² per litre/per coat by brush or roller. | |
IMPORTANT SHIPPING & DELIVERY INFORMATION
Coo-Var Suregrip Anti-Slip Floor Paint is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
Coo-Var Floor Paint
2,400+ Colours. Semi-gloss floor coating designed for a wide range of surfaces. For wood, metal, concrete, and glass-reinforced plastic, both indoors and outdoors. Protects against dirt, grime, oil and dust.
Coo-Var Acid Etch
Acid etching solution designed to remove laitance and salts from concrete. For new concrete, power floated concrete floors, and exceptionally smooth surfaces. Non-flammable and water-soluble. Essential for ensuring proper adhesion of subsequent paint layers.
Coo-Var Penetrating Wood Primer
White oil-based wood primer with a semi-matt finish. Ideal for interior and exterior wood surfaces. Provides a smooth and uniform surface for subsequent coatings.
Coo-Var Zinc Phosphate Primer
Modified alkyd metal primer. Anti-corrosive protection on iron and steel, available in red and grey colours. For iron, steel, aluminium, and combined wood and metal structures, including fire escapes, metal gates, and garage doors.
Floor Application Kit
Floor Application Kit from Rawlins Paints provides all the application equipment needed to apply conventional floor paints and coatings to a professional standard. The application of floor coatings is often crucial to their performance, so it is important to use the right tools to ensure a lasting finish. Each kit contains: 12" Roller,...