- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
We no longer stock this product, but can recommend Ronacrete Monoprufe DPM as a great alternative.
Please note: it is important to check that any alternative product is suitable for your requirements, as our suggestion is given in good faith but without warranty. If you are in any doubt please first contact our technical team on 0113 2455450 (option 2) or send a message to [email protected] where we will be happy to discuss your project.
N-Virol Superseal Plus Damp Proofing DPM Paint is a highly advanced styrene butadiene latex based liquid applied membrane which can be used for several applications including damp walls, floors and on basement walls (both internally and externally). It can also be used as a primary waterproofing barrier on new build basements. It offers a simple method for many water proofing and vapour proofing applications. Bonds well to many substrates.
- Can be applied to damp substrates
- Non-toxic, non-hazardous, solvent and plasticiser free
- Low water vapour permeability - Tough, highly flexible - Good crack bridging properties
- Alkali resistant - can be applied to alkaline surfaces - Resistant to silage acids
- Non staining and stain blocking
- Ideal for floors, basements, walls, tiling, water storage and silage storage
- Note: Black colour has been discontonued by the manufacturer
Gill on 2022-07-20 20:53:48 | Question:
What's coverage per 10kg of Superseal Plus please? I have 60sqm to do. |
Answer from Rawlins’ Technical Team:
The coverage rate is 1.20kg/m² for the two coats required. For 60m² you will require approximately 72kg. | |
Debra Angel on 2021-10-13 16:51:47 | Question:
Hi there I have an out building being used as a studio it was plastered and painted but im getting a lot of damp mould and also efflorescent and things are going mouldy despite heating im having to de mould surfaces can i use this product on what i have straight up if not what should i use thank you Debra |
Answer from Rawlins’ Technical Team:
For application to a floor this paint is designed to be used directly on to a prepared concrete slab then covered with a screed or floor coverings. For application to walls it should be applied before plaster. We have contacted you directly for more information. | |
Duncan Finlayson on 2021-08-16 17:11:24 | Question:
Can this DPM be overpainted? |
Answer from Rawlins’ Technical Team:
No this is designed to be used under floor screeds, tiles, render or plaster. | |
Roger Kenworthy on 2021-08-13 17:59:40 | Question:
I have a single skin exterior wall which I cannot treat internally with a dri-coat. Would this product treat the wall externally with the same effect to prevent damp and water ingress.? |
Answer from Rawlins’ Technical Team:
This can be used internally or externally. | |
IMPORTANT SHIPPING & DELIVERY INFORMATION
N-Virol Superseal Plus Damp Proofing DPM Paint is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT