- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Hempalin Primer 12050 is a general purpose primer for Hempalin systems for protection of steel in mild to medium atmospheric corrosive environments.
- For professional use only
- Quick-drying alkyd primer containing zinc phosphate for newbuild and maintenence
- Complies with EU Directive 2004/42/EC, subcategory i
- EC-type examined as a low flame spread material when used as part of a predefined paint system
Hempalin Primer 12050 is a general purpose primer for Hempalin systems for protection of steel in mild to medium atmospheric corrosive environments.
Quick Links - Click To Jump To Section:
Features & Benefits
- For professional use only
- Quick-drying alkyd primer containing zinc phosphate
- Complies with EU Directive 2004/42/EC, subcategory i
- EC-type examined as a low flame spread material when used as part of a predefined paint system
- For newbuild and maintenance/repair
- Easy to apply with brush and roller. Can also be applied with spray. Nozzle pressure: 150 bar [2200 psi]
Nozzle orifice: 0.018"
Note: Product may be specified in another film thickness than indicated depending on purpose and area of use. This will alter spreading rate, drying and curing time and overcoating interval. For best performance, avoid excessive film thickness.
If brush or roller application is used, more coats will be necessary to achieve the specified dry film thickness. Spray data are indicative and subject to adjustment. Pressure is for a material temperature of 20°C.
Overcoating
Hempel’s specification supersedes any guidelines indicated in the overcoating table. Overcoating times are indicative for products of the same generic chemistry.
Atmospheric Medium
Hempalin Enamel 52140/Hempalin Primer 12050
-
- 16 hours - 5½ days @ 10°C
- 8 hours - 72 hours @ 20°C
- 6 hours - 54 hours @ 30°C
- 4 hours - 36 hours @ 40°C
Data sheet
- Manufacturer
- Hempel
- For Use By
- Professional Use
- Interior / Exterior Use
- Exterior Use
- Water / Solvent Based
- Solvent Based
- For Use On
- Steel
- Application Method
- Brush/roller, airless spray, air spray
- Sheen
- Flat
- VOC Levels
- 405 g/L
- Single, Two or Three Pack
- Single
- Product Certifications
- Complies with EU Directive 2004/42/EC, subcategory i
- Pack Size
- 5L, 20L
- Application
- Brush, Roller, Spray
- Coverage
- 10-16m²/L, 12m²/L recommended
- Recommended Thinner/Cleaner
- Hempel's Thinner 08230
- Max. Application Temperature
- Maximum, dry exposure only: 120°C
- Solids by Volume
- 49 ± 2%
- Shelf Life (from date of manufacture)
- 5 years
- Touch Dry
- 55 minutes @ 10°C, 30 minutes @ 20°C, 20 minutes @ 30°C, 15 minutes @ 40°C
- Recommended Dry Film Thickness
- 30-50 microns (40 recommended)
- Recommended Wet Film Thickness
- 60-100 microns (80 recommended)
- UN Number
- UN1263
- Drying time
- Surface dry: 90 minutes @ 10°C, 45 minutes @ 20°C, 35 minutes @ 30°C, 20 minutes @ 40°C
- Dry to Recoat
- 16 hours - 5½ days @ 10°C, 8 hours - 72 hours @ 0°C, 6 hours - 54 hours @ 30°C, 4 hours - 36 hours @ 40°C
- Specific Gravity
- 1.3 kg/L
- Hard Dry
- 3 hours @ 10°C, 1½ hours @ 20°C, 1 hour @ 30°C, ⅔ hour @ 40°C
- Flashpoint
- 38°C
- Colour(s)
- 50410 Red Ox, 40760 Green
- Base Type
- Solvent-Based
- Base Type
- Alkyd
- Suitable For Use On
- Steel
- Finish
- Flat
- Application Method
- Brush
- Application Method
- Roller
- Application Method
- Spray
- Usages
- Atmospheric
- Usages
- Zinc Phosphate
- Product Usage Type
- Primer
- Product Range
- Hempalin
- Colour Family
- Green
- Colour Family
- Red
- Dry to Recoat (@ 20-25°C)
- 8 hours
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Hempel Hempalin Primer 12050 is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
Hempel Hempalin Enamel 52140
Hempalin Enamel 52140 is a glossy, general purpose, alkyd topcoat forming a weather resistant coating. The product is flexible and resistant to salt water and spillage of mineral oil and other aliphatic hydrocarbons. Recommended as finishing coat for alkyd systems on exterior and interior steel and woodwork in mildly to moderately corrosive...
Surface Preparation Kits for Steel
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools) 1 x Rust-Oleum...