- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Hempadur 15553 is a two-component epoxy paint that cures to a flexible, well adhering coating with good abrasion and impact resistance.
- For systems on hot dipped galvanized, aluminium, steel and stainless steel surfaces in moderately to severely corrosive environments, also suited when roughening of the surface is not possible
- EC-type examined as a low flame spread material when used as part of a predefined paint system
- Complies with EU Directive 2004/42/EC, The Paints Directive on the limitation of volatile organic compounds: subcategory j
- Complies with the European Fire Standard EN 13501-1, fire reaction class: B-s1, d0
For professional use only
Description
Hempadur 15553 is a two-component epoxy paint. It cures to a flexible, well adhering coating with good abrasion and impact resistance. Contains zinc phosphate.
Quick Links - Click To Jump To Section:
Features & Benefits
- For professional use only
- For new build, maintenance and repair
- Cures down to -10°C/14°F
- For systems on hot dipped galvanized, aluminium, steel and stainless steel surfaces in moderately to severely corrosive environments
- Also suited when roughening of the surface is not possible
- Recommended coverage 11 m²/L
- Apply with airless spray, brush or roller. Nozzle pressure: 175 bar [2500 psi] Nozzle orifice: 0.017-0.019"
- Recommended thinner: Hempel Thinner 08450
- Recommended cleaner: Hempel Tool Cleaner 99610
- Complies with EU Directive 2004/42/EC, The Paints Directive on the limitation of volatile organic compounds: subcategory j
- Complies with the European Fire Standard EN 13501-1, fire reaction class: B-s1, d0
- EC-type examined as a low flame spread material when used as part of a predefined paint system
Note: Product may be specified in another film thickness than indicated depending on purpose and area of use. This will alter spreading rate, drying and curing time and overcoating interval. For best performance, avoid excessive film thickness.
If brush or roller application is used, more coats will be necessary to achieve the specified dry film thickness. Spray data are indicative and subject to adjustment. Pressure is for a material temperature of 20°C.
Drying & Overcoating
Hempel’s specification supersedes any guidelines indicated in the overcoating table. Overcoating times are indicative for products of the same generic chemistry.
- Previous coat: None
- Subsequent coat: According to Hempel’s Specification. Recommended products are: Hempadur, Hempathane, Hempatex
- Touch dry in 18 minutes @ 20°C
- Hard dry in 90 minutes @ 20°C
Atmospheric Medium
Hempadur 15553
- 27 hours - Ext. @ 0°C
- 14 hours - Ext. @ 10°C
- 3 hours - Ext. @ 20°C
- 27 hours - 90 days @ 0°C
- 14 hours - 45 days @ 10°C
- 3 hours - 10 days @ 20°C
IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contacted to obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and Conditions and should be applied only by an individual with the necessary expertise and experience. We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.
Product Details
6035-934832
Data sheet
- Manufacturer
- Hempel
- For Use By
- Professional Use
- Interior / Exterior Use
- Exterior Use
- Water / Solvent Based
- Solvent based
- For Use On
- Steel
- Application Method
- Brush, roller, spray
- Sheen
- Flat
- VOC Levels
- 388 g/L
- Single, Two or Three Pack
- Two-Pack
- Pack Size
- 5L, 20L
- Mixing Ratio
- Base 15557 : Curing agent 98021 (3 : 1 by volume)
- Touch Dry (at 20°C)
- 18 minutes
- Dry to Recoat (at 20°C)
- 3 hours
- Pot Life (at 20°C)
- 2 hours
- Coverage
- 6.9 m²/L- 11 m²/L (11 m²/L recommended)
- Recommended Thinner/Cleaner
- Hempel's Thinner 08450, Hempel's Tool Cleaner 99610
- Max. Application Temperature
- Maximum, dry exposure only: 140°C
- Min. Application Temperature
- (-10°C)
- Solids by Volume
- 55 ± 2%
- Shelf Life (from date of manufacture)
- 6 months (base) 36 months (curing agent)
- Finish
- Flat
- Recommended Dry Film Thickness
- 50-80 micron (50 recommended)
- Recommended Wet Film Thickness
- 90-150 micron (90 recommended)
- UN Number
- UN1263
- Specific Gravity
- 1.5 kg/L
- Hard Dry
- 90 minutes
- Flashpoint
- 30°C
- Colour(s)
- 11630 Off White
- Base Type
- Solvent-Based
- Base Type
- Epoxy
- Suitable For Use On
- Aluminium
- Suitable For Use On
- Stainless Steel
- Suitable For Use On
- Steel
- Suitable For Use On
- Galvanised Steel
- Finish
- Flat
- Application Method
- Brush
- Application Method
- Roller
- Application Method
- Spray
- Usages
- Flexible
- Usages
- Low Temperature
- Usages
- Atmospheric
- Usages
- Zinc Phosphate
- Product Usage Type
- Primer
- Product Range
- Hempadur
- Colour Family
- Off-White
- Dry to Recoat (@ 20-25°C)
- 3 hours
- Categorised As
- Metal Paints > Low Temperature Primers
- Seasonal
- Cold Weather
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Hempel Hempadur 15553 is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
You might also like
Hempel Thinner 08450
Hempel's Thinner 08450 is a general purpose thinner for Hempadur qualities. For paint to be applied in a low film thickness (for instance as a "sealer coat") or if the paint has become too thick, e.g. in cold weather Tools can usually be cleaned with the thinner prescribed for the product
Price
£25.39
(incl. VAT)
In Stock and Available for Delivery
Hempel Hempathane HS 55610
Hempel Hempathane HS 55610 is a glossy polyurethane topcoat, cured with aliphatic isocyanate. The product has good gloss and colour retention and contains zinc phosphate. For professional use only Recommended as VOC compliant, highbuild finishing coat for protection of structural steel in severely corrosive environment, and may be...
Price
£77.92
(incl. VAT)
In Stock and Available for Delivery
Surface Preparation Kits for Steel
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools) 1 x Rust-Oleum...
Price
£25.93
(incl. VAT)
In Stock and Available for Delivery
Hempel Tool Cleaner 99610
Hempel Tool Cleaner 99610 is a blend of strong solvents for cleaning of tools that have been used for mixing or application of two-component epoxy products. Better cleaning properties than epoxy thinners, and does not contain chlorinated solvent For cleaning of brushes, paint rollers, spray equipment, and other tools which have been used...
Price
£34.61
(incl. VAT)
In Stock and Available for Delivery