- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Hempadur Fast Dry 17410 is an epoxy paint, which combines high volume solids with a short drying time.
- For professional use only
- Contains zinc phosphate for better corrosion protection
- Suitable for onshore corrosion protection of new-build steel constructions where fast to handle and short overcoating times are required, such as steel for factory buildings, stadiums, exhibition halls, airports, power plants, refineries, chemical and petrochemical plants
Description
Hempadur Fast Dry 17410 is an epoxy paint, which combines high volume solids with a short drying time.
Quick Links - Click To Jump To Section:
Features & Benefits 
- For professional use only
- Contains zinc phosphate for better corrosion protection
- Suitable for onshore corrosion protection of new-build steel constructions where fast to handle and short overcoating times are required
- High volume solids - 74 ± 2%
- Fast drying
- Apply with brush, roller or airless spray. Nozzle pressure: 225 bar [3300 psi] Nozzle orifice: 0.019-0.021"
- Touch dry in ½ hour, hard dry in 2½ hours, overcoat in 120 minutes @ 20°C
- Epoxy coats have an inherent tendency of chalking in outdoor exposure. This does not affect the performance of the coating
Note: If brush or roller application is used, more coats will be necessary to achieve the specified dry film thickness. Spray data are indicative and subject to adjustment. Pressure is for a material temperature of 20°C.
Product may be specified in another film thickness than indicated depending on purpose and area of use. This will alter spreading rate, drying and curing time and overcoating interval. For best performance, avoid excessive film thickness. Overthickness should be closely controlled and never locally exceed 250 micron [10 mils] DFT. On irregular surfaces it is recommended to employ special care in avoiding over application.
Uses
- New build
- Maintenance and repair
- Steel for factory buildings
- Stadiums
- Exhibition halls
- Airports
- Power plants
- Refineries
- Chemical and petrochemical plants
Overcoating
Hempel’s specification supersedes any guidelines indicated in the product data sheet.
Atmospheric medium, Hempadur Fast Dry 17410/Hempathane HS 55610:
- Minimum 18 hours @ -10°C, 9 hours @ 0°C, 4 hours @ 10°C, 120 minutes @ 20°C
- Maximum Ext.
Product Details
6051-902515
Data sheet
- Manufacturer
- Hempel
- For Use By
- Professional Use
- Interior / Exterior Use
- Exterior Use
- For Use On
- Steel
- Application Method
- Brush/roller, airless spray
- Sheen
- Semi-gloss
- VOC Levels
- 251 g/L
- Single, Two or Three Pack
- Two-Pack
- Pack Size
- 20L
- Mixing Ratio
- Base 17419 : Curing agent 98410 (4 : 1 by volume)
- Application
- Brush, Roller, Spray
- Coverage
- 5.9 m²/L-11 m²/L (7.4 m²/L recommended)
- Recommended Thinner/Cleaner
- Hempel's Thinner 08450, Hempel's Tool Cleaner 99610
- Min. Application Temperature
- -10°C
- Solids by Volume
- 74 ± 2%
- Shelf Life (from date of manufacture)
- 36 months (base), 12 months (curing agent)
- Touch Dry
- 6 hours @ -10°C, 2½ hours @ 0°C, 1¼ hours @ 10°C, ½ hour @ 20°C
- Recommended Dry Film Thickness
- 70-125 microns (100 recommended)
- Recommended Wet Film Thickness
- 90-170 microns (130 recommended)
- Pot Life
- 2 hours @ 15°C, 1½ hours @ 20°C, 1 hour @ 25°C
- Dry to Recoat
- Minimum 18 hours @ -10°C, 9 hours @ 0°C, 4 hours @ 10°C, 120 minutes @ 20°C
- Specific Gravity
- 1.6 kg/L
- Hard Dry
- 15 hours @ -10°C, 8 hours @ 0°C, 4½ hours @ 10°C, 2½ hours @ 20°C
- Flashpoint
- 27°C
- Colour(s)
- 11480 Grey, 50630 Red
- Base Type
- Solvent-Based
- Base Type
- Epoxy
- Suitable For Use On
- Steel
- Finish
- Semi-Gloss
- Application Method
- Brush
- Application Method
- Roller
- Application Method
- Spray
- Usages
- Zinc Phosphate
- Usages
- High Solids
- Usages
- Quick Drying
- Usages
- Atmospheric
- Product Usage Type
- Primer
- Product Range
- Hempadur Fast-Dry
- Colour Family
- Grey
- Colour Family
- Red
- Dry to Recoat (@ 20-25°C)
- 2 hours
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Hempel Hempadur Fast Dry 17410 is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
You might also like
