- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Hempel Epoxy Filler 35250 is a two-component, solvent-free, epoxy filler, which when fully cured - is resistant to water, aliphatic hydrocarbons, and related products
- Can be applied in thick coats up to approximately 5mm without runs or sags
- Use as a filler for metals, hardwood, and other rigid materials, and for filling of pinholes in weldings and similar irregularities in steel work not later exposed to strong chemicals
- Colour swatch is a representation and not indicative of the final colour
Hempel Epoxy Filler 35250 is a two-component, solvent-free, epoxy filler, which when fully cured - is resistant to water, aliphatic hydrocarbons, and related products.
Features & Benefits
- Can be applied in thick coats up to approximately 5 mm without runs or sags
- For use as a filler for metals, hardwood, and other rigid materials
- For filling of pinholes in weldings and similar irregularities in steel work not later exposed to strong chemicals
- Service temperature maximum, dry exposure only: 140°C. In water (no temperature gradient): 35°C
- Touch dry in approx. 8 hours, fully cured in 5 day(s) (approx.) 20°C
- Apply with putty knife, or similar
Data sheet
- Manufacturer
- Hempel
- For Use By
- Professional Use
- Interior / Exterior Use
- Exterior Use
- For Use On
- Wood
- For Use On
- Steel
- Application Method
- Putty knife, or similar
- VOC Levels
- 10 g/l
- Mixing Ratio
- BASE 35259: CURING AGENT 95250 1 : 1 by volume
- Touch Dry (at 20°C)
- 8 hours approx.
- Fully Cured (at 20°C)
- 5 days approx.
- Pot Life (at 20°C)
- 1 hour
- Recommended Thinner/Cleaner
- HEMPEL'S TOOL CLEANER 99610
- Solids by Volume
- 100%
- Heat Resistance (up-to)
- Service temperature maximum, dry exposure only: 140°C. In water (no temperature gradient): 35°C
- Specific Gravity
- 1.6 kg/litre
- Flashpoint
- 70°C
- Colour(s)
- Light Grey
- Base Type
- Solvent Free
- Finish
- Semi-Gloss
- Application Method
- Spatula
- Product Usage Type
- Filler
- Product Range
- Epoxy Filler
- Colour Family
- Grey
Questions
Question about the product
Steve Denney on 2022-04-08 10:30:58 | Question:
Can this be used on fibreglass? |
Answer from Rawlins’ Technical Team:
Yes, the Hempel Epoxy Filler 35250 can be used on GRP/ Fibreglass. For preparation it is recommended to use a dry paper grade of around 150-180 or wet paper grade of 180 grit. | |
IMPORTANT SHIPPING & DELIVERY INFORMATION
Hempel Epoxy Filler 35250 Light Grey is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT