- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
The ultimate all surface paint with up to 15 years performance, available in Anthracite Grey and recommended for use on uPVC and composite windows and doors.
- Looking for a lighter or darker grey? Pick a trending shade of grey here
- Also suitable for masonry, timber, metal, plastic, concrete, cladding, weathered bitumen, stucco, brick, stone and more
- Read our blog post on painting uPVC, or click here for commonly asked questions about painting uPVC
- Cracking, blistering and flaking resistant - Long lasting finish
- Where application conditions (i.e. winter months) do not allow for water based paint to be used externally, it is recommended to use Zinsser Allcoat Exterior Solvent Based instead
Designed for long-term decoration of various surfaces in Anthracite Grey, including uPVC (such as windows and doors) timber, metal, masonry, plastic (including composite), concrete, cladding, stone, brick, and more. The paint forms a durable, vapour-permeable, water-shedding coating that is easy to apply and maintain. It provides excellent resistance to cracking, blistering, and flaking, and contains a biocide to protect against fungal degradation. The self-priming formula bonds to existing glossy paints without sanding, making it suitable for quick and efficient project completion.
Before application, ensure surfaces are clean, dry, and free of contaminants. The paint is not intended for use on exterior floors, decks, or surfaces subject to prolonged water contact. Store indoors between 5°C and 25°C, and clean tools immediately after use. Health and safety precautions include avoiding contact with eyes and skin and disposing of contents and container according to local regulations. The product contains no Diisocyanates and is not classified as hazardous under Regulation (EC) No. 1272/2008. For more details, refer to the MSDS available upon request.
Data sheet
- Manufacturer
- Zinsser
- For Use By
- Consumer Use
- For Use On
- uPVC
Timber
Metal
Masonry
Plastic
Concrete - Application Method
- Brush
Roller
Spray - Sheen
- Satin
- VOC Levels
- Low (50-149 g/l)
- Pack Size
- 1L
2.5L
5L
10L - Application
- Brush, Roller, Spray
- Coverage
- 12m² per litre
- Min. Application Temperature
- 10°C
- Touch Dry
- 30 mins
- Colour(s)
- Fully Tintable
- Base Type
- Water-Based
- Suitable For Use On
- Masonry
- Suitable For Use On
- Timber
- Suitable For Use On
- Metal
- Suitable For Use On
- Cladding
- Suitable For Use On
- Weathered Bitumen
- Suitable For Use On
- Concrete
- Suitable For Use On
- Stucco
- Suitable For Use On
- Brick
- Suitable For Use On
- Stone
- Suitable For Use On
- Doors
- Suitable For Use On
- Trim Skirting
- Suitable For Use On
- Windows
- Suitable For Use On
- Front Doors
- Suitable For Use On
- Garage Doors
- Suitable For Use On
- UPVC
- Finish
- Satin
- Application Method
- Roller
- Application Method
- Spray
- Application Method
- Brush
- Manufacturer
- Zinsser
- Usages
- High Weather Resistance
- Fastest Delivery
- Next Working Day
- Colour Family
- Anthracite Grey
Questions
Question about the product
Wayne Sadler on 2024-06-12 18:08:26 | Question:
Hi guys. Can I use your product on aluminum. Exterior. |
Answer from Rawlins’ Technical Team:
Thank you for your enquiry, please provide more details of your project requirements to [email protected] | |
Paul Butcher on 2023-10-04 12:56:58 | Question:
Hiya I have a composite front door and would like to change the colour to anthracite. What would you recommend and also how much would I require. Many thanks Paul Butcher |
Answer from Rawlins’ Technical Team:
Assuming the omposite door is bare, clean, dry, sound and prepared as detailed in the technical data sheet you could consider Zinsser Allcoat Exterior Water-Based. We'd recommend 3 coats in your choice of Satin, Matt or Gloss to be applied to areas subject to pooling water. This can be mixed to many RAL, BS & NCS Colours including RAL 7016 Anthracite Grey, with a coverage of 12m2 per litre per coat. | |
Paul on 2023-09-09 13:01:05 | Question:
Hi, I have already painted one coat of Zinsser Allcoat Matt and wished I’d gone satin. Can I just buy smaller another tin of satin to use as a second coat so not to waste the matt and of course money? Many thanks |
Answer from Rawlins’ Technical Team:
Yes that would be fine assuming you use the water based version linked below. | |
Karen on 2023-08-24 22:57:56 | Question:
Hi, Can this be applied to new uPVC please? On some products I’ve seen, it says it needs to be at least a year old Thanks |
Answer from Rawlins’ Technical Team:
Assuming you have prepared the UPVC in accordance with the manufacturers instructions, you can apply this product direct to suitably prepared UPVC substrates. 2 coats are required, the first coat will prime the UPVC, and the second will seal and protect, giving up to a 15 year performance guarantee. This product is also available to a Matt or Gloss finish as well as Satin. | |
Jason on 2023-02-11 10:57:32 | Question:
We have painted facia boards that need re-painting. The paint is sound and wondered if the surface is lightly sanded can this be painted on directly or if a primer is needed please? If primer is required please can you advise which product to use? |
Answer from Rawlins’ Technical Team:
Assuming the previously painted facia boards are sanded, they are clean, dry and sound this could be used, no primer would be required. We would recommend to test on a small area prior to full application for compatibility and adhesion. Please note as this is water based, temperatures for application and curing must be over 10°C. Alternatively you could condsider Zinsser AllCoat Exterior Satin (Solvent Based), this can be used down to 5°C. | |
Tony on 2022-06-10 20:34:18 | Question:
Do you need to use a primer first before painting? |
Answer from Rawlins’ Technical Team:
This can be applied directly to clean, dry, sound and prepared upvc but other substrates may require a primer. If you are painting bare timber Zinsser Cover Stain would be required. | |
Tim on 2022-05-26 12:29:19 | Question:
Sorry, what sandpaper grit do you recommend for upvc? |
Answer from Rawlins’ Technical Team:
We would recommend the use of a fine grade sand paper. We have a detailed blog post on the preparation and application of paints to UPVC here. | |
Tim on 2022-05-15 08:41:06 | Question:
Hello White upvc - apart from cleaning well as your spec sheet - does upvc need light sanding or after clean paint direct? |
Answer from Rawlins’ Technical Team:
Yes the upvc must be cleaned, degreased, lightly sanded and prepared in accordanve with the manufacturers instructions prior to application. | |
Ellys on 2022-02-18 11:24:12 | Question:
Hello ral 7016 anthracite grey paint Can this paint be used on a garage door, that's already painted, Like those garage doors that come pre painted in white |
Answer from Rawlins’ Technical Team:
Yes this can be applied to a previously painted garage door, it must be clean, dry, sound and prepared as detailed in the technical data sheet. It would need to be lightly sanded to provide a key , we would recommend testing for compatibility and adhesion prior to full application. Being a waterbased paint we would recommend temperatures at application and during curing at above 10°C alternatively you could consider the solvent based option below for appilcation down to 5°C. | |
IMPORTANT SHIPPING & DELIVERY INFORMATION
Zinsser AllCoat Exterior Anthracite Grey - Satin (Water Based) is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
Zinsser Bulls Eye 1-2-3 Plus
White stain blocker. For interior and exterior walls, ceilings, doors, trim, fascia, soffits, foundations, railings, and related paintable surfaces. Bonds to glossy surfaces without scuff sanding. Formulated with proprietary stain-blocking resins. Binds moderately chalky surfaces. Dries quickly, touch dry in 30 minutes, and can be...
Zinsser B-I-N Aerosol
White matt. For interior ceilings, walls, doors, trim, cabinets, furniture, and related paintable surfaces. Dries in minutes; can be recoated in 45 minutes. Superior adhesion to glossy surfaces without scuff sanding. High-hiding formula blocks stubborn and persistent stains. Permanently blocks odours and seals bleeding knots and sap...
Zinsser Bulls Eye 1-2-3
Available in 3,000 colours. Usable on interior and exterior surfaces: walls, ceilings, doors, trim, fascia, soffits, foundations, railings, and more. Adheres to glossy surfaces without pre-sanding. Resists mould and mildew growth. Fast drying - recoat in 1 hour. Compatible with both oil and latex topcoats. Order a Colour Sample...
Zinsser Cover Stain
High-performance, solvent-based primer-sealer in 2,900+ colours. Suitable for both interior and exterior surfaces including wood, plaster, metal, masonry, and more. Fast Drying: Recoat in less than 2 hours. High Hiding Formula: Blocks tough stains such as water, fire, smoke, and nicotine. Excellent Adhesion: Sticks to all surfaces...
Zinsser B-I-N
Shellac-based primer-sealer and stain killer in 1,500+ colours. For interior and spot exterior applications on ceilings, walls, doors, trim, cabinets, furniture, and more. Quick Drying: Dries to the touch in 20 minutes and can be recoated in 45 minutes. Superior Adhesion: Adheres to glossy surfaces without the need for sanding. Stain...
Zinsser Cover Stain Aerosol
Primer-sealer stain killer aerosol available in white. Can be used on interior and exterior surfaces, including ceilings, walls, doors, trim, cabinets, and more. Fast drying, can be recoated in less than 2 hours. Blocks most stains, including nicotine and water-soluble tannin bleed. Suitable for use on fire, smoke, and water-damaged...
General Painting Application Kit
Provides the basics for any painting project. Whether it is a one off job, or you just want to make sure the right application tools get to site. Provides an economical way of making sure you will have what you need Ideal for interior and exterior paint projects, including uPVC surfaces, walls, ceilings, and more. Click to jump down to...
Zinsser Brush Cleaner & Restorer
Removes dried-on paint from brushes, including shellac, solvent, and water-based paints. Fast-acting formula. No overnight soaking required. More effective than traditional mineral cleaners like white spirit. Contains powerful detergents for an ultra-clean finish.
Zinsser Universal Degreaser & Cleaner
Water-based detergent. It can be used on tiles, grout, baths, sinks, showers, tools, equipment, machinery, driveways, BBQs, and ovens. Removes tough stains such as grease, oil, paint overspray, adhesive, wax, food stains, and more. Ideal for cleaning surfaces before painting, ensuring a smooth, residue-free finish. Suitable for both...
Zinsser Mould Killer & Remover
Effective mould, fungus, and algae remover. Ideal for use on internal surfaces such as tiles, wood, plaster, and wallpaper. Perfect for bathrooms, kitchens, and high-humidity areas. Contains a powerful fungicide for a better and longer-lasting paint finish. Fast-acting formula that cleans and prepares surfaces for painting. Suitable for...