- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Ultimate all surface paint with up to 15 years performance, available in Anthracite Grey and recommended for use on uPVC and composite windows and doors.
- Looking for a lighter or darker grey? Pick one of our 12 trending shades of grey here
- Also available in 4,100+ RAL, NCS and BS colours
- Can be used on uPVC, cladding, Plastisol, woodwork, steel, masonry, and more (see product data sheet)
- Read our blog post on painting uPVC, or click here for commonly asked questions about painting uPVC
- Mould and weather resistant - Recoatable in just 3 hours - 15 year lifetime
- It is recommended to use Zinsser Allcoat Exterior Water Based unless application conditions (i.e. winter months) do not allow for water based paint to be used externally
- This product is not suitable for application on floors
Please always refer to the downloadable PDF`s from the "Data Sheets" tab for more information on:
- Technical Data
- Suitable Surfaces and Substrates
- Substrate Preparation
- Application Instructions
- Suitable Primers/Topcoats (where applicable)
- Drying Times
- Application Equipment
- Health & Safety Information
- Warranty
Data sheet
- Manufacturer
- Zinsser
- For Use By
- Consumer Use
- For Use On
- Aluminium, Cladding, Stucco, Brickwork, Stone, uPVC, Wood, Steel, Plastisol, Galvanising, Concrete
- Single, Two or Three Pack
- Single
- Pack Size
- 1L, 2.5L, 5L
- Application
- Brush, Roller, Spray
- Touch Dry (at 20°C)
- 1 Hour
- Dry to Recoat (at 20°C)
- 3 Hours
- Coverage
- 10m² per litre
- Solids by Volume
- 50%
- UN Number
- UN1263
- Hard Dry
- 16 hours at 20℃
- Colour(s)
- Fully Tintable
- Base Type
- Solvent-Based
- Suitable For Use On
- Timber
- Suitable For Use On
- Metal
- Suitable For Use On
- Cladding
- Suitable For Use On
- Weathered Bitumen
- Suitable For Use On
- Concrete
- Suitable For Use On
- Stucco
- Suitable For Use On
- Brick
- Suitable For Use On
- Stone
- Suitable For Use On
- Doors
- Suitable For Use On
- Trim Skirting
- Suitable For Use On
- Windows
- Suitable For Use On
- Front Doors
- Suitable For Use On
- Garage Doors
- Suitable For Use On
- UPVC
- Suitable For Use On
- Masonry
- Finish
- Satin
- Application Method
- Spray
- Application Method
- Brush
- Application Method
- Roller
- Manufacturer
- Zinsser
- Fastest Delivery
- Next Working Day
- Colour Family
- Anthracite Grey
Questions
Question about the product
Ellen on 2024-01-31 09:28:53 | Question:
Can this be used to paint my outdoor window frames? What will I need to do in prep? |
Answer from Rawlins’ Technical Team:
Assuming the window frames are UPVC, that are clean, dry, sound, lightly abraded and prepared as detailed in the technical datasheet, this product can be applied in 2 coats to treat the window frames, the first coat will prime and the finish coat will seal and protect. | |
Jessica on 2023-04-16 17:12:19 | Question:
Hi I am wanting to use this paint to paint my outdoor concrete window ceils would this paint be appropriate? |
Answer from Rawlins’ Technical Team:
Yes this product could be used, we would recommend to apply three coats to areas that could be exposed to pooling water. If the window sills are previously painted we would recommend to test on a small area for compatibility and adhesion prior to full application. | |
Amy on 2023-02-09 10:14:02 | Question:
I have a new concrete retaining wall in my garden which I would like to paint anthracite grey. Will this paint work for that and do I need to prime the wall first? |
Answer from Rawlins’ Technical Team:
Unforuntately this product would not be suitable for painting a retaining wall as the normally hold moisture which will cause the paint to fail. Assuming the retaining wall is clean, dry, sound and prepared as detailed in the technical data sheet we can recommend Zinsser Watertite. This is available in white and a range of pastel shades. | |
Jillian Hunter on 2022-10-24 19:44:53 | Question:
What is the area covered per litre? |
Answer from Rawlins’ Technical Team:
The coverage rate for this product is 10m² per litre per coat. Preparation and application information is in the technical data sheet, this can be found in the data sheets tab on the product page. | |
Diane kelly on 2021-11-29 21:00:23 | Question:
Can I go over satin allcoat exterior with Matt as don’t like the shine |
Answer from Rawlins’ Technical Team:
Yes once the previously applied paint is fully cured, it is clean, dry, sound and prepared as detailed in the technical data sheet it could be over painted with Zinsser Allcoat Exterior Matt (Water based). A matt finish is only available in the water based version, we would not recommend applying water based at this time of year due and it would be best to wait till spring. It may be worth noting as the applied satin paint weathers the shine will reduce, which may end up being a finish you will be happy with. | |
Daniel Mortimer on 2021-11-05 10:41:41 | Question:
I want to paint a garage door, using an electric fence sprayer will it have to be thinned down with thinners? If so what is the percentage? Or can I use it straight out of the tub? |
Answer from Rawlins’ Technical Team:
This product does not normally require to be thinned for application by brush, roller or airless spray, but can be thinned to a maximum of 10% with white spirit for conventional spray application. We would recommend consulting the manufacturer of the electric fench sprayer to see if it is capable of spraying this paint. | |
Mrs Michelle Kilpatrick on 2021-09-15 16:49:32 | Question:
Can this product be used indoors? I am wanting to paint a wooden headboard. Regards |
Answer from Rawlins’ Technical Team:
This product can be used indoors, but the Zinsser Allcoat Exterior (water based) would be a better option as it will have less odours. | |
IMPORTANT SHIPPING & DELIVERY INFORMATION
Zinsser AllCoat Exterior Satin (Solvent Based) - Anthracite Grey is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
Zinsser B-I-N Aerosol
White matt. For interior ceilings, walls, doors, trim, cabinets, furniture, and related paintable surfaces. Dries in minutes; can be recoated in 45 minutes. Superior adhesion to glossy surfaces without scuff sanding. High-hiding formula blocks stubborn and persistent stains. Permanently blocks odours and seals bleeding knots and sap...
Zinsser B-I-N
Shellac-based primer-sealer and stain killer in 1,500+ colours. For interior and spot exterior applications on ceilings, walls, doors, trim, cabinets, furniture, and more. Quick Drying: Dries to the touch in 20 minutes and can be recoated in 45 minutes. Superior Adhesion: Adheres to glossy surfaces without the need for sanding. Stain...
General Painting Application Kit
Provides the basics for any painting project. Whether it is a one off job, or you just want to make sure the right application tools get to site. Provides an economical way of making sure you will have what you need Ideal for interior and exterior paint projects, including uPVC surfaces, walls, ceilings, and more. Click to jump down to...
Zinsser Brush Cleaner & Restorer
Removes dried-on paint from brushes, including shellac, solvent, and water-based paints. Fast-acting formula. No overnight soaking required. More effective than traditional mineral cleaners like white spirit. Contains powerful detergents for an ultra-clean finish.
Zinsser Mould Killer & Remover
Effective mould, fungus, and algae remover. Ideal for use on internal surfaces such as tiles, wood, plaster, and wallpaper. Perfect for bathrooms, kitchens, and high-humidity areas. Contains a powerful fungicide for a better and longer-lasting paint finish. Fast-acting formula that cleans and prepares surfaces for painting. Suitable for...