- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Hempaline Defend 630 is a solvent free high performance epoxy novolac lining with excellent chemical resistance to a wide range of chemicals and solvents.
- May be applied as a one or two coat scheme, and as part of a hand lay or spray applied glass fibre reinforced system
- High performance tank lining for the storage of a wide range of petrochemicals including crude oil up to 120°C, MTBE, produced water, alcohols, aromatic and aliphatic solvents, aviation fuels, gasoline blends, select acidic and caustic chemicals
- Colour swatch is a representation and not indicative of the final colour
For professional use only
Hempaline Defend 630 is a solvent free high performance epoxy novolac lining with excellent chemical resistance to a wide range of chemicals and solvents
Quick Links - Click To Jump To Section:
Features & Benefits
- For professional use only
- For new build, maintenance and repair
- May be applied as a one or two coat scheme, and as part of a hand lay or spray applied glass fibre reinforced system
- High performance tank lining for the storage of a wide range of petrochemicals including (but not limited to) crude oil up to 120°C, MTBE, produced water, alcohols, aromatic and aliphatic solvents, aviation fuels, gasoline blends, select acidic and caustic chemicals
- Apply with brush, roller or airless spray. Nozzle pressure: 200 bar [2900 psi] Nozzle orifice: 0.021-0.029
- This product should not be thinned. Tools can be cleaned with Hempel Tool Cleaner 99610
If brush or roller application is used, more coats will be necessary to achieve the specified dry film thickness. Spray data are indicative and subject to adjustment. Pressure is for a material temperature of 20°C.
Product may be specified in another film thickness than indicated depending on purpose and area of use. This will alter spreading rate, drying and curing time and overcoating interval. For best performance, avoid excessive film thickness.
Drying & Overvcoating
Hempel’s specification supersedes any guidelines indicated in the overcoating table. Overcoating times are indicative for products of the same generic chemistry.
- Previous coat: None or according to Hempel’s specification. Recommended product is: Hempaline Prepare 130, Hempaline Prepare 110
- Subsequent coat: None or according to Hempel’s specification. Recommended product is: Hempaline Defend 630
Touch Dry
-
- 8 hours @ 10°C
- 4 hours @ 20°C
- 2 hours @ 30°C
- 1 hour @ 40°C
Hard Dry
-
- 24 hours @ 10°C
- 12 hours @ 20°C
- 5 hours @ 30°C
- 2½ hours @ 40°C
Fully Cured
-
- 7 days @ 10°C
- 3 days @ 20°C
- 2 days @ 30°C
- 1 day @ 40°C
Immersion
Hempaline Defend 630 Cure 72
-
- 24 hours - 30 days @ 10°C
- 16 hours - 30 days @ 20°C
- 16 hours - 21 days @ 30°C
- 16 hours - 14 days @ 40°C
Data sheet
- Manufacturer
- Hempel
- For Use By
- Professional Use
- Interior / Exterior Use
- Exterior Use
- For Use On
- Steel
- Application Method
- Brush/roller, airless spray
- Sheen
- Semi-gloss
- VOC Levels
- 21 g/L
- Single, Two or Three Pack
- Two-Pack
- Mixing Ratio
- Base 37829 : Curing agent 9780S (3 : 1 by volume)
- Application
- Brush, Roller, Spray
- Touch Dry (at 20°C)
- 4 hours
- Dry to Recoat (at 20°C)
- 16 hours
- Fully Cured (at 20°C)
- 3 days
- Pot Life (at 20°C)
- 50 minutes
- Coverage
- 1.3 m²/L-3.3 m²/L (2 m²/L recommended)
- Recommended Thinner/Cleaner
- No thinning, Hempel's Tool Cleaner 99610
- Solids by Volume
- 100%
- Heat Resistance (up-to)
- Maximum, dry exposure only: 150°C
- Shelf Life (from date of manufacture)
- 12 months
- Recommended Dry Film Thickness
- 300-750 microns (500 recommended)
- Recommended Wet Film Thickness
- 300-750 microns (500 recommended)
- Specific Gravity
- 1.4 kg/L
- Hard Dry
- 12 hours
- Flashpoint
- 74°C
- Colour(s)
- 10000 White, 36641 Blue
- Finish
- Semi-Gloss
- Application Method
- Brush
- Application Method
- Roller
- Application Method
- Spray
- Product Usage Type
- Tank Lining
- Product Range
- Hempaline
- Colour Family
- Blue
- Colour Family
- White
- For Tanks or Pipes
- Tank
Questions
Question about the product
Yuni on 2021-07-30 08:07:29 | Question:
Hi may I get a quotation about Hempaline Defend 630 Cure 72 please? And do you ship Malaysia ? How much is delivery fee? How long it will take? Looking forward to hearing from you soon. Have a good day. Thanks & Regards, ELT MANAGEMENT SDN BHD |
Answer from Rawlins’ Technical Team:
Thank you for the enquiry, unfortunately we can only ship to mainland uk addresses currently. | |
IMPORTANT SHIPPING & DELIVERY INFORMATION
Hempel Hempaline Defend 630 Cure 72 37820 is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
Surface Preparation Kits for Steel
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools) 1 x Rust-Oleum...
Hempel Tool Cleaner 99610
Hempel Tool Cleaner 99610 is a blend of strong solvents for cleaning of tools that have been used for mixing or application of two-component epoxy products. Better cleaning properties than epoxy thinners, and does not contain chlorinated solvent For cleaning of brushes, paint rollers, spray equipment, and other tools which have been used...