- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Two pack PU coating in Anthracite Grey (RAL 7016) for direct application onto PVCu (uPVC), GRP, mill, polyester powder coated and anodised aluminium, stainless steel, composite doors and more.
- Sets of base + hardener; individual components are available seperately: base, hardener, thinner, accelerator, retarder and cleaner
- Product guarantee and performance are only guaranteed with use of Kolorbond K2 Hardener and Cleaner
- Highly resistant to abrasion - Very durable, once dry
- In most applications does not require a primer
- Easy to apply using any standard spray equipment, brush or roller
- For the brush grade version of this product please see Kolorbond DecoPro
- Also available in 2400+ colours from RAL, NCS and British Standard - Durable, lightfast coating
- K2 G-Pro Glass Additive available
- 10 year adhesion guarantee - 5 year colour fastness guarantee
- Fire tested to: ISO 5658-2:2006+A1:2011; does not upgrade surface. Full report can be found in the Data Sheets tab below.
Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colour.
Professional use only - from the 24th August 2023, adequate training is required before industrial or professional use of this product.
Should you require training, visit - https://www.safeusediisocyanates.eu/
Description
Please always refer to the downloadable PDF`s from the "Data Sheets" tab for more information on:
- Technical Data
- Suitable Surfaces and Substrates
- Substrate Preparation
- Application Instructions
- Suitable Primers/Topcoats (where applicable)
- Drying Times
- Application Equipment
- Health & Safety Information
- Warranty
Product Details
5782-900288
Data sheet
- Manufacturer
- Technispray
- For Use By
- Industrial Use
- Water / Solvent Based
- Solvent
- For Use On
- uPVC
GRP
Composite Doors
Mill
Aluminium
Stainless Steel
Hard Plastics
Cast Iron
Steel
Light Alloys
Galvanising
Phosphated Steel
Glass - Sheen
- Matt
Satin
Semi-Gloss
Gloss - Single, Two or Three Pack
- Two-Pack
- Pack Size
- 6L
30L
1L
5L
20L - Mixing Ratio
- By volume: 5 parts base, 1 part hardener
- Mixing Ratio
- By weight: 7 parts base, 1 part hardener
- Application
- Spray
- Pot Life (at 20°C)
- 2 - 3 hours
- Coverage
- 14m2 per litre (30 micron dry film thickness)
- Recommended Thinner/Cleaner
- Gun cleaner
- VOC
- 520-550 g/l (dependant on colour)
- Finish
- Matt (10%)
- Finish
- Satin (30%)
- Finish
- Semi-Gloss (50%)
- Finish
- Gloss (70+%)
- Size
- 1.25L (1L Base + 0.25L Hardener)
- Size
- 30L Pack (25L Base + 5L Hardener)
- Size
- 6L Pack (5L Base + 1L Hardener)
- Drying time
- At 20C: dust free: 1 hour
- Specific Gravity
- At 20C: Kolorbond K2 1.3 g/cm, K2 Hardener 1.0 g/cm
- Solids by Weight
- 60-65% (dependant on colour)
- Hard Dry
- At 20C: 16 hours, at 50C: 1 hour
- Flashpoint
- 23C (method ISO3679)
- Flash Time (Between Coats)
- 15 minutes
- Colour(s)
- Fully Tintable
- Base Type
- Solvent-Based
- Suitable For Use On
- Phosphated Steel
- Suitable For Use On
- Composite
- Suitable For Use On
- UPVC
- Suitable For Use On
- Aluminium
- Suitable For Use On
- Stainless Steel
- Suitable For Use On
- Steel
- Suitable For Use On
- Cast Iron
- Suitable For Use On
- Light Alloys
- Suitable For Use On
- Galvanised Steel
- Suitable For Use On
- Glass
- Suitable For Use On
- GRP Glass-Reinforced Plastic
- Suitable For Use On
- Mill
- Suitable For Use On
- Hard Plastics
- Finish
- Matt
- Finish
- Satin
- Finish
- Gloss
- Finish
- Semi-Gloss
- Application Method
- Spray
- Manufacturer
- Kolorbond
- Colour Family
- Anthracite Grey
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Kolorbond K2 Set - Anthracite Grey is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
You might also like
Kolorbond Original
5,000+ Colours. Premium coating for PVCu plastic and powder-coated surfaces. Gloss, satin or matt finish. For windows, doors, cladding, and conservatories. High UV protection, weather resistant. Chemically bonds with the surface - 10 year guarantee. Extremely colour stable - guaranteed to hold its colour, without excessive...
Price
£46.80
(incl. VAT)
In Stock and Available for Delivery
Kolorbond K2 Thinner
Thinner for use with Kolorbond K2 and the brush grade version Kolorbond DecoPro. More Info Delivery Info
Price
£21.60
(incl. VAT)
In Stock and Available for Delivery
Kolorbond K2 Accelerator
For use with Kolorbond K2 and the brush grade version Kolorbond DecoPro, two pack PU coatings which can be applied directly onto a variety of substrates including uPVC, metals, GRP and hard plastics. K2 Accelerator is used to accelerate the curing process of Kolorbond K2 and Kolorbond DecoPro when added at 2%. More Info Delivery Info...
Price
£57.60
(incl. VAT)
In Stock and Available for Delivery
Kolorbond K2
5,000+ Colours. Two-pack polyurethane coating designed for industrial applications. For metals, GRP, and hard plastics. Matt, Satin, Semi-Gloss and Gloss finishes. Professional use only. Fire tested to: ISO 5658-2:2006+A1:2011; does not upgrade surface. Full report can be found in the Data Sheets tab below. Please note: Colours are...
Price
£72.54
(incl. VAT)
In Stock and Available for Delivery