- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Hempadur Multi-Strength 45753 is a self-priming, high-build, pure epoxy coating which cures to an abrasion and corrosion resistant coating. Applicable by standard heavy-duty airless spray equipment.
- Recommended as a heavy duty coating for areas exposed to abrasion and aggressive corrosive climate such as ramps, ship hulls and holds of bulk carriers, also suitable for ballast tank coatings for special purposes such as chemical carriers carrying hot cargoes and other purposes where a pure epoxy coating is requested
- Complies with EU Directive 2004/42/EC, The Paints Directive on the limitation of volatile organic compounds: subcategory j, and more certifications below
For professional use only
Description
Hempadur Multi-Strength 45753 is a self-priming, high-build, pure epoxy coating which cures to an abrasion and corrosion resistant coating.
Quick Links - Click To Jump To Section:
Features & Benefits
- For professional use only
- For new build, maintenance and repair
- Applicable by brush/roller or standard heavy-duty airless spray equipment. Nozzle pressure: 250 bar [3600 psi] Nozzle orifice: 0.021-0.023"
- Intended for use in cold climates
- High mechanical resistance
- High surface tolerance
- Recommended thinner: Hempel Thinner 08450
- Recommended cleaner: Hempel Tool Cleaner 99610
If brush or roller application is used, more coats will be necessary to achieve the specified dry film thickness. Spray data are indicative and subject to adjustment. Pressure is for a material temperature of 20°C
Product may be specified in another film thickness than indicated depending on purpose and area of use. This will alter spreading rate, drying and curing time and overcoating interval. For best performance, avoid excessive film thickness
Epoxy coats have an inherent tendency of chalking in outdoor exposure. This does not affect the performance of the coating.
Product Certifications
- Complies with EU Directive 2004/42/EC, The Paints Directive on the limitation of volatile organic compounds: subcategory j
- Recognized Abrasion Resistant Ice Coating
- Meets requirements for internal use in pipelines for power generation when tested according to NS 5417 (Norwegian standard)
Drying & Overcoating
Hempel’s specification supersedes any guidelines indicated in the product data sheet. Overcoating times are indicative for products of the same generic chemistry.
- Previous coat: None or according to Hempel’s specification
- Subsequent coat: None or according to Hempel’s specification. Recommended products are: Hempadur, Hempathane
Atmospheric severe
Hempadur Multi-Strength 45753 :
-
- 45 hours - 90 days @ -10°C
- 23 hours - 90 days @ 0°C
- 5 hours - 30 days @ 20°C
- 4 hours - 22 days @ 30°C
-
- 54 hours - 27 days @ -10°C
- 27 hours - 13 days @ 0°C
- 6 hours - 72 hours @ 20°C
- 4½ hours - 54 hours @ 30°C
Immersion
Hempadur MultiStrength 45753
- 54 hours - 90 days @ -10°C
- 27 hours - 90 days @ 0°C
- 6 hours - 30 days @ 20°C
- 4½ hours - 22 days @ 30°C
Product Details
6091-902536
Data sheet
- Manufacturer
- Hempel
- For Use By
- Professional Use
- Interior / Exterior Use
- Exterior Use
- For Use On
- Steel
- Application Method
- Brush/roller, airless spray
- Sheen
- Semi-gloss
- VOC Levels
- 234 g/L
- Single, Two or Three Pack
- Two-Pack
- Pack Size
- 20L
- Mixing Ratio
- Base 45755 : Curing agent 98750 (3 : 1 by volume)
- Application
- Brush, Roller, Spray
- Coverage
- 2.6 m²/L-6.3 m²/L (6.3 m²/L recommended)
- Recommended Thinner/Cleaner
- Hempel's Thinner 08450, Hempel's Tool Cleaner 99610
- Solids by Volume
- 79 ± 2%
- Heat Resistance (up-to)
- Maximum, dry exposure only: 140°C, Maximum, in water (no temperature gradient): 50°C
- Shelf Life (from date of manufacture)
- 36 months
- Touch Dry
- 14 hours @ -10°C, 8 hours @ 0°C, 2½ hours @ 20°C, 1½ hours @ 30°C
- Recommended Dry Film Thickness
- 125-300 microns (200 recommended)
- Recommended Wet Film Thickness
- 150-370 (250 recommended)
- Pot Life
- 2 hours @ 15°C, 1 hour @ 20°C, ½ hour @ 25°C
- Dry to Recoat
- 45 hours - 90 days @ -10°C 23 hours - 90 days @ 0°C 5 hours - 30 days @ 20°C 4 hours - 22 days @ 30°C
- Fully Cured
- 63 days @ -10°C, 32 days @ 0°C, 7 days @ 20°C, 3½ days @ 30°C
- Specific Gravity
- 1.6 kg/L
- Hard Dry
- 45 hours @ -10°C, 23 hours @ 0°C, 4 hours @ 20°C, 2½ hours @ 30°C
- Flashpoint
- 27°C
- Colour(s)
- 12340 MIO Grey, 50630 Red
- Base Type
- Solvent-Based
- Suitable For Use On
- Steel
- Finish
- Semi-Gloss
- Application Method
- Roller
- Application Method
- Brush
- Application Method
- Spray
- Product Usage Type
- Topcoat
- Product Range
- Hempadur Multi-Strength
- Colour Family
- Grey
- Colour Family
- Red
 Ross Finbow on 2023-06-17 04:06:01 | Question:
Can this paint be made available in a brighter red than shown? I need it to be as close as possible to a traditional GPO pillar box or Telephone box red. Please advise an the availability of such as colour. Thank you. |
Answer from Rawlins’ Technical Team:
This product is only available in the standard grey or red colours options. | |
IMPORTANT SHIPPING & DELIVERY INFORMATION
Hempel Hempadur Multi-Strength 45753 is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
You might also like
