- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
- Clear gloss finish.
- Water-based sealer for concrete.
- Reduces dust, simplifying cleaning.
- For bare and clean concrete floors.
- No thinning required.
- Touch dry in 1 hour, walkable after 8-12 hours.
Description
Rust-Oleum 5220 Epoxyshield Sealer - Water-Based Dustproofing Sealer
The EpoxyShield Sealer is a single-pack, water-based solution designed to provide an effective dust-proofing layer on concrete surfaces. With its clear, non-yellowing gloss finish, this sealer is perfect for enhancing the durability and appearance of your concrete floors. Whether you're looking to reduce dust or prepare your floor for further treatment, EpoxyShield Sealer delivers exceptional performance.
Applications
EpoxyShield Sealer is ideal for use on bare and clean concrete floors. It acts as a durable primer when used with EpoxyShield 5200 Ultra, offering superior adhesion and long-lasting protection. The product can be applied using a brush or roller, with no need for thinning. For best results, ensure the surface is clean and free from oils, greases, or other contaminants. Do not use on smooth, very dense concrete or concrete with curing compounds.
Features and Benefits
- Water-based and environmentally friendly.
- Non-yellowing, clear gloss finish.
- Touch dry in just 1 hour.
- Walkable within 8-12 hours.
- Effective dust-proofing and easy to clean.
Application Guidelines
For optimal results, apply EpoxyShield Sealer only on fully clean and dry concrete surfaces. Avoid application on smooth or dense concrete, and ensure new concrete has cured for at least 30 days. Use EpoxyShield Cleaner/Degreaser 2901 to remove any oil or grease. Mix the product thoroughly before use and apply two coats for best results.
Storage and Safety
Store in a dry, well-ventilated area away from direct sunlight and extreme temperatures. The product has a minimum shelf life of 2 years when stored properly. Always consult the Safety Data Sheet for detailed safety instructions and disposal guidelines.
Health and Safety
While EpoxyShield Sealer is certified for consumer use and poses no significant hazards, it is always advisable to handle with care. The product does not contain Diisocyanates and meets the criteria for non-hazardous classification under Regulation (EC) No. 1272/2008. Always refer to the Safety Data Sheet for comprehensive safety information.
Product Details
662-940326
Data sheet
- Manufacturer
- Rust-Oleum
- For Use By
- Consumer Use
- Interior / Exterior Use
- Interior Use
- For Use On
- Concrete Floors
- Application Method
- Roller
- Sheen
- Gloss
- Colour
- Clear
- VOC Levels
- Low (50-149 g/l)
- Pack Size
- 5L
- Coverage
- 10m² per litre
- Max. Application Temperature
- 35°C
- Min. Application Temperature
- 10°C
- Density
- 1,02
- Solids by Volume
- 30 %
- VOC
- 77 g/l
- Shelf Life (from date of manufacture)
- 2 years
- Touch Dry
- 1 Hour
- Base Type
- Water-Based
- Suitable For Use On
- Garage Floors
- Suitable For Use On
- Concrete Floors
- Finish
- Gloss
- Application Method
- Brush
- Application Method
- Roller
- Components
- 1K
- Product Usage Type
- Sealer
- Fastest Delivery
- Next Working Day
- Colour Family
- Clear
- Product Type
- Acrylic
Questions
Question about the product
Malwina
on
2023-10-08 22:24:05
| Question:
Can I use this product on unglazed porcelain tiles? I've bought victorian style tiles that have very porous surface and gets dirty easily |
Answer from Rawlins’ Technical Team:
Assuming the porcelain tiles are an internal porous mineral substrate, that they are bare, clean, dry, sound and prepared in accordance with the technical data sheet, this product could be used. | |
|
Andrew
on
2020-04-07 11:12:14
| Question:
Can this product be used over a floor that has been sealed using Blackfriar Professional Water Based Floor Sealer? |
Answer from Rawlins’ Technical Team:
No this product is design to be applied to bare concrete floors to reduce dust and protect the floor from liquids. It can be used as a finishing coating but only to bare concrete. | |
|
G
on
2019-11-14 07:25:32
| Question:
Morning, I would like to have a clear finish on my new kitchen floor - which was levelled with a self-levelling screed. Is the Rust-Oleum 5220 EpoxyShield Sealer appropriate to use on this type of floor i.e. in such a high traffic area. Thank you. |
Answer from Rawlins’ Technical Team:
Rust-Oleum 5220 Epoxyshield Sealer could be used for this type of application however we would suggest you ensure the self levelling screed used is suitable to be left as a wearing course to recieve the level of expected traffic and that it can in fact be overcoated with Rust-Oleum 5220 Epoxyshield Sealer. You would need to contact the Technical Department of the manufacturer of the screed to ascertain this information, presenting them with the data sheet of Rust-Oleum 5220 Epoxyshield Sealer. | |
|
Alan James
on
2019-06-29 08:00:20
| Question:
Hi, We wish to waterproof and harden the concrete floor of a garage for parking motorcycles. We ride in all weathers and so sometimes come home with wet bikes. We also do some maintenance so there are occasional small oil spills. Concrete was poured 3 months ago, with an area of about 25 sq m. Can you advise the best product please. Many thanks. |
Answer from Rawlins’ Technical Team:
Rust-Oleum 5220 Epoxyshield Sealer could be considered for this purpose, but given that the mention of frequent water and occasional oil spillages, we would instead advise 2 - 3 coats of Rust-Oleum 4900 Polycoat 2K. | |
|
Chris
on
2018-12-14 21:53:12
| Question:
I’ve just finished grinding the surface of a recently laid concrete floor in my extension. I used a diamond grinding disc attached to an angle grinder which has removed all ridges, but I’ve stopped short of polishing it. Would this product be suitable in my floor please? Thanks |
Answer from Rawlins’ Technical Team:
Diamond grinding is an excellent method of preparation for concrete prior to applying Rust-Oleum 5220 Epoxyshield Sealer. Ensure the concrete is completely clean and dry before application. New concrete should be allowed to cure for at least 30 days minimum. | |
|
P Storey
on
2018-05-13 11:42:38
| Question:
I'm thinking of sealing my garage floor using Rust-Oleum 5220 Epoxyshield Sealer. Can I apply a standard floor paint on top of the Sealer? Thanks. |
Answer from Rawlins’ Technical Team:
After application of Rust-Oleum 5220 Epoxyshield Sealer if a coloured topcoat is required we recommend Rust-Oleum 5200 Epoxyshield Ultra is used. | |
|
Tom lester
on
2018-02-04 13:15:59
| Question:
Can l lay underlay and carpet on top of this product |
Answer from Rawlins’ Technical Team:
Yes once Rust-Oleum 5220 Epoxyshield Sealer has fully cured. | |
|
PJ
on
2018-02-01 21:39:55
| Question:
Hi I would like to have a clear finish on my new kitchen extention concrete floor which has been power floated. Is this EpoxyShield Sealer appropriate to use on this floor and in such a hi traffic area (using the two coats recommended) many thanks |
Answer from Rawlins’ Technical Team:
Rust-Oleum 5220 Epoxyshield Sealer cannot be applied on smooth or very dense concrete or concrete which contains curing compound. As this is a power floated floor it would limit the adhesion that may be obtained between substrate and paint. This would also be true for any alternatives we might consider. We can of course provide a clear hard wearing floor system, but in order to do so, you would need to “open up” the surface by way of grinding or blasting and whilst this would assist with the adhesion, the consequence of course would be removing the very smooth appearance. If you are happy with this compromise we would then recommend the application of something like Rust-Oleum 4900 Polycoat 2K instead. However we would recommend carrying out a trial first to ensure adhesion, appearance, performance, etc. are all acceptable. | |
|
nick
on
2017-07-09 14:02:26
| Question:
can i use this outside |
Answer from Rawlins’ Technical Team:
No, but the Coo-Var Floor Sealer can. | |
|
Jennifer
on
2017-05-03 04:18:46
| Question:
Can you use this product on a wooden floor? |
Answer from Rawlins’ Technical Team:
No, you can see suitable products here: Wood Floor Finishes. | |
IMPORTANT SHIPPING & DELIVERY INFORMATION
Rust-Oleum 5220 Epoxyshield Sealer is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
You might also like
Rust-Oleum 5200 Epoxyshield Ultra
Quick-drying water-based floor coating available in various greys. For concrete floors and old coatings. Satin matt finish. Good resistance to car tyres, diesel, motor oil, coolant fluid, and various household chemicals. Touch dry in just 2 hours.
Price
£69.66
(incl. VAT)
In Stock and Available for Delivery
Floor Application Kit
Floor Application Kit from Rawlins Paints provides all the application equipment needed to apply conventional floor paints and coatings to a professional standard. The application of floor coatings is often crucial to their performance, so it is important to use the right tools to ensure a lasting finish. Each kit contains: 12" Roller,...
Price
£101.80
(incl. VAT)
In Stock and Available for Delivery