- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
- Available in 6 colours.
- Rapid-curing acrylic floor paint for use on asphalt, concrete, pavement, bitumen, tennis courts, and playgrounds.
- Rain-proof and recoatable after just one hour.
- Can be applied on slightly damp surfaces.
- Excellent resistance to U.V. and weathering.
- Water-based formulation, safe to use, and virtually no odour.
Rust-Oleum Tarmacoat - Fast Drying Acrylic Floor Paint
Rust-Oleum Tarmacoat is a versatile, rapid curing acrylic floor paint designed for a wide range of surfaces including asphalt, concrete, pavement, and bitumen. Its fast-drying formula ensures it is rain-proof and recoatable after just one hour, making it perfect for both short-term and long-term projects. The water-based formulation is safe to use, emits virtually no odour, and provides excellent resistance to U.V. and weathering. Available in a variety of colours, Tarmacoat offers the flexibility and durability needed for diverse applications.
Applications
- Asphalt and concrete surfaces.
- Pavements and bitumen substrates.
- Parking bays for short-term or intermittent use.
- Line marking for tennis courts and playgrounds.
Usage Instructions
Ensure the surface is clean, sound, and dry (slightly damp is acceptable). Tarmacoat can be applied to existing paint provided all poorly bonded material is removed and glossy surfaces are dulled using abrasive paper. For porous concrete surfaces, first prime with Primer 44HS or EpoxyShield Sealer 5220. For asphalt surfaces, apply a coat of Tarmacoat diluted with 20% water.
- Brush: Apply undiluted.
- Roller: Use a medium pile type roller. One coat is generally sufficient, although a second coat may be necessary for very porous or rough surfaces.
Safety and Limitations
Do not apply:
- In areas constantly under water.
- On garage floors.
- Externally if rain or frost is forecast or if the temperature is below 10ºC.
Always refer to the downloadable data sheet for more detailed information on product usage and safety measures.
Health and Safety
Contains substances that may cause an allergic reaction. Ensure proper ventilation during application. Avoid inhalation of spray or mist. Wear appropriate protective equipment as outlined in the safety data sheet.
Data sheet
- For Use By
- Consumer Use
- Interior / Exterior Use
- Exterior Use
- For Use On
- Asphalt
Concrete - Application Method
- Brush
Roller - Sheen
- Matt
- Colour
- Standard / Ready Mixed
- VOC Levels
- Ultra-Low (5-49 g/l)
- Single, Two or Three Pack
- Single
- Pack Size
- 5L
- Application
- Brush, Roller
- Dry to Handle (at 20°C)
- 1 hour
- Dry to Recoat (at 20°C)
- 1 hour
- Fully Cured (at 20°C)
- 2 days
- Coverage
- 4 - 8 m² per litre, depending on the type of surface.
- Density
- 1,3
- VOC
- 40 g/l
- Shelf Life (from date of manufacture)
- 2 years from date of production in its sealed original packaging, if stored in dry, well ventilated areas, not in direct sunlight at temperatures between 5° and 35°C.
- Touch Dry
- 30 mins
- Recommended Dry Film Thickness
- 54 µm
- Recommended Wet Film Thickness
- 120 µm
- UN Number
- N/A
- Solids by Weight
- 57%
- Base Type
- Water-Based
- Suitable For Use On
- Carparks
- Suitable For Use On
- Concrete
- Suitable For Use On
- Tarmac
- Suitable For Use On
- Asphalt
- Suitable For Use On
- Bituminous Surfaces
- Finish
- Matt
- Application Method
- Brush
- Application Method
- Roller
- Components
- 1K
- Usages
- Line Marking
- Product Usage Type
- Topcoat
- Fastest Delivery
- Next Working Day
- Colour Family
- Grey
- Colour Family
- Green
- Colour Family
- Red
- Colour Family
- Yellow
- Colour Family
- Black
- Colour Family
- White
Questions
Question about the product
Danny Powlesland on 2021-08-04 16:35:26 | Question:
Would you recommend this for painting an exterior concrete base for a garden shed? |
Answer from Rawlins’ Technical Team:
Assuming the concrete is clean, dry, sound and prepared as detailed in the technical data sheet this can be used. If you are looking for a surface applied damp proof membrane we would recommend 402 Damp Proof Coating. | |
Kerry on 2020-06-17 08:57:43 | Question:
Do you need to use a sealant after to increase the durability? |
Answer from Rawlins’ Technical Team:
No sealant or topcoat is required after use of Tarmacoat. | |
Steve on 2019-09-17 08:34:26 | Question:
Can I paint red tarmacoat over my black tarmac drive? Thank you Steve. |
Answer from Rawlins’ Technical Team:
Yes, however for a regularly used driveway we would instead suggest Hydron Mona-Guard Revive. | |
davy on 2018-08-02 21:57:27 | Question:
I have a balcony with cermaic tiles that are chipped and allowing water to pentetrate. Can I used this product direclty on tile and seal the balcony from further water damage? |
Answer from Rawlins’ Technical Team:
No, but you could use Rust-Oleum Mathys Pegasol Quartz instead. | |
Dāsi on 2018-05-02 11:40:37 | Question:
How do you apply the product? Can anyone do it or it requires an expert hand? |
Answer from Rawlins’ Technical Team:
Please download the Product Data Sheet from the 'Download' section on the product page for details of how to apply. | |
gillian vance on 2018-04-19 20:47:07 | Question:
I have small patio area 20ft by 10 ft roughly the yorkstone slabs surface is off almost. they have been down 20 years do you think if i could coated them with tarmac paint it would last ok? |
Answer from Rawlins’ Technical Team:
We would recommend first priming with Rust-Oleum 5220 Epoxyshield Sealer assuming the surface will be porous. Then you could apply 2 coats of Rust-Oleum Tarmacoat. | |
Robert Gordon on 2018-02-24 20:52:48 | Question:
Hi I have a imprinted drive way and was wondering if this paint would be suitable to cover it I have took the last coat of sealer of with a pressure washer and am now down to bare concrete thanks |
Answer from Rawlins’ Technical Team:
Rust-Oleum Tarmacoat can be applied to exterior concrete surfaces but will not 'infill' or 'hide' the imprinted pattern the concrete has it will only colour it. | |
Jeff on 2017-11-01 09:12:44 | Question:
Can these colours be mixed to make different shades? |
Answer from Rawlins’ Technical Team:
If you are asking two different colours of standard Tarmacoat can be mixed together to achieve a different colour, then yes that is possible. But the responsibility as to the actual colour achieved, and for any additional mixings to be consistent, is entirely with yourself. | |
Bob on 2016-11-25 08:51:25 | Question:
Is the anti slip aggregate ready mixed in or can extra be added and are two coats preferable |
Answer from Rawlins’ Technical Team:
Rust-Oleum Tarmacoat is a smooth coating so if you wish to produce a non-slip surface you would need to use one of the Rust-Oleum Non-Skid Additives which can either be mixed into the Tarmacoat or sprinkled into the freshly applied coating and overcoated once dry. | |
Bob on 2016-11-25 08:51:25 | Question:
Is the anti slip aggregate ready mixed in or can extra be added and are two coats preferable |
Answer from Rawlins’ Technical Team:
Rust-Oleum Tarmacoat is a smooth coating so if you wish to produce a non-slip surface you would need to use one of the Rust-Oleum Non-Skid Additives which can either be mixed into the Tarmacoat or sprinkled into the freshly applied coating and overcoated once dry. | |
IMPORTANT SHIPPING & DELIVERY INFORMATION
Rust-Oleum Tarmacoat is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
Rust-Oleum Mathys Noxyde
We no longer stock this product, but have Rust-Oleum Mathys Noxyde - 5KG colours in clearance, for immediate dispatch!
Rust-Oleum Mathys Primer 44 HS
Available in grey. Designed for stabilising loose particles on brittle or weathered roofs, floors, and walls. For porous mineral substrates. Flexible, withstands temperature changes, offers quick water resistance. Professional use only. VOC compliant.
Rust-Oleum 5220 Epoxyshield Sealer
Clear gloss finish. Water-based sealer for concrete. Reduces dust, simplifying cleaning. For bare and clean concrete floors. No thinning required. Touch dry in 1 hour, walkable after 8-12 hours.
Floor Application Kit
Floor Application Kit from Rawlins Paints provides all the application equipment needed to apply conventional floor paints and coatings to a professional standard. The application of floor coatings is often crucial to their performance, so it is important to use the right tools to ensure a lasting finish. Each kit contains: 12" Roller,...