- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Hempel Hempathane HS 55610 is a glossy polyurethane topcoat, cured with aliphatic isocyanate. The product has good gloss and colour retention and contains zinc phosphate.
- For professional use only
- Recommended as VOC compliant, highbuild finishing coat for protection of structural steel in severely corrosive environment, and may be specified as a one coat "direct to metal" system in environments classified as C2 and C3
- Complies with EU Directive 2004/42/EC, The Paints Directive on the limitation of volatile organic compounds: subcategory j
- EC-type examined as a low flame spread material when used as part of a predefined paint system
Product customisation
Don't forget to save your customization to be able to add to cartDescription
Hempathane HS 55610 is a glossy polyurethane topcoat, cured with aliphatic isocyanate. The product has good gloss and colour retention and contains zinc phosphate.
Hempathane HS 55610 is recommended as VOC compliant, highbuild finishing coat for protection of structural steel in severely corrosive environment. The product may be specified as a one coat "direct to metal" system in environments classified as C2 and C3.
Quick Links - Click To Jump To Section:
Features & Benefits
- For professional use only
- For severely corrosive atmospheric environment
- Direct-to-metal in C2 and C3 environments
- Glossy with good gloss and colour retention
- High volume solids and VOC-compliant
- The minimum temperature for curing is -10°C
- Contains zinc phosphate
- For new build, maintenance and repair
- Apply with brush/roller or airless spray. Nozzle pressure: 175 bar [2500 psi] Nozzle orifice: 0.017-0.021"
- Recommended thinner/cleaner: Hempel Thinner 08080
If brush or roller application is used, more coats will be necessary to achieve the specified dry film thickness. Spray data are indicative and subject to adjustment. Pressure is for a material temperature of 20°C.
Product may be specified in another film thickness than indicated depending on purpose and area of use. This will alter spreading rate, drying and curing time and overcoating interval. For best performance, avoid excessive film thickness.
Overcoating
Hempel’s specification supersedes any guidelines indicated in the overcoating table. Overcoating times are indicative for products of the same generic chemistry.
Previous coat: According to Hempel’s Specification. Recommended products are:
- Hempaprime Multi 500 45953
- Hempadur Quattro series
- Hempadur Avantguard series (550), (750)
Atmospheric medium
Hempathane HS 55610
-
- 30 hours - Ext @ -10°C
- 18 hours - Ext @ 0°C
- 6 hours - Ext @ 20°C
- 3 hours - Ext @ 30°C
Product Details
7019-903008
Data sheet
- Manufacturer
- Hempel
- For Use By
- Professional Use
- Interior / Exterior Use
- Exterior Use
- For Use On
- Steel
- Application Method
- Brush/roller, airless spray
- Sheen
- Gloss
- VOC Levels
- 340 g/L
- Single, Two or Three Pack
- Two-Pack
- Pack Size
- 5L, 20L
- Mixing Ratio
- Base 55619 : Curing agent 97050 (7 : 1 by volume)
- Application
- Brush, Roller, Spray
- Touch Dry (at 20°C)
- 90 Mins
- Coverage
- 5.1 m²/L-13 m²/L (8.3 m²/L recommended)
- Recommended Thinner/Cleaner
- Hempel's Thinner 08080
- Min. Application Temperature
- -10°C
- Solids by Volume
- 67 ± 2% / 59 ± 2%
- Heat Resistance (up-to)
- Maximum, dry exposure only: 120 °C
- Shelf Life (from date of manufacture)
- 36 months (base) 24 months (curing agent)
- Touch Dry
- 120 minutes @ 10°C, 90 minutes @ 20°C, 60 minutes @ 30°C
- Recommended Dry Film Thickness
- 50-130 microns (80 recommended)
- Recommended Wet Film Thickness
- 75-190 microns (120 recommended)
- UN Number
- UN1263
- Pot Life
- 3½ hours @ 10°C, 2 hours @ 20°C, 1 hour @ 30°C
- Dry to Recoat
- 30 hours - Ext @ -10°C, 18 hours - Ext @ 0°C, 6 hours - Ext @ 20°C, 3 hours - Ext @ 30°C
- Specific Gravity
- 1.4 kg/L / 1.1 kg/L
- Hard Dry
- 12 hours @ 10°C, 5 hours @ 20°C, 3 hours @ 30°C
- Flashpoint
- 31°C
- Colour(s)
- Fully Tintable
- Base Type
- Solvent-Based
- Suitable For Use On
- Steel
- Finish
- Gloss
- Application Method
- Brush
- Application Method
- Roller
- Application Method
- Spray
- Usages
- Low Temperature
- Usages
- Atmospheric
- Usages
- Zinc Phosphate
- Usages
- Gloss Retention
- Usages
- Colour Retention
- Usages
- 1 Coat
- Usages
- Severe Exposures
- Usages
- Direct to Metal
- Usages
- High Solids
- Usages
- High Build
- Product Usage Type
- Topcoat
- Product Range
- Hempathane
- Colour Family
- Red
- Colour Family
- Brown
- Colour Family
- Pink
- Colour Family
- Orange
- Colour Family
- Purple
- Colour Family
- Yellow
- Colour Family
- Off-White
- Colour Family
- Black
- Colour Family
- White
- Colour Family
- Neutral
- Colour Family
- Violet
- Colour Family
- Anthracite Grey
- Colour Family
- Cream
- Colour Family
- Beige
- Colour Family
- Grey
- Colour Family
- Green
- Colour Family
- Blue
- Categorised As
- Metal Paints > Low Temperature Direct-to-Metal Paints
- Seasonal
- Cold Weather
- Product Type
- Polyurethane
- Environment
- Severe Exposures
- Environment
- Atmospheric
- Environment
- Low Temperature
- Touch Dry/Dust Free (@ 20-25°C)
- 90 mins
- Product Attributes
- 1 coat
- Product Attributes
- High Build
- Product Attributes
- High Solids
- Product Attributes
- Zinc Phosphate
- Product Attributes
- Gloss Retention
- Product Attributes
- Colour Retention
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Hempel Hempathane HS 55610 is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
You might also like
Hempel Thinner 08080
Hempel's Thinner 08080 is a thinner for Hempel's Hempatex, Hempaquick, Hempathane topcoats and enamels, Hempel's Antifoulings, Globic and Dynamic, Oceanic and Olympic. For paint to be applied in a low film thickness (for instance as a "sealer coat") or if the paint has become too thick, e.g. in cold weather Tools can usually be cleaned...
Price
£25.39
(incl. VAT)
In Stock and Available for Delivery
Hempel Hempadur Quattro 17634
Hempadur Quattro 17634 is an epoxy primer which cures to a hard and tough coating with good resistance to seawater and various oils. Good resistance to abrasion and has excellent anticorrosive and mechanical properties ideal for application in newbuilding, in ballast tanks, cargo oil tanks and cargo holds EC-type examined as a low flame...
Price
£235.36
(incl. VAT)
In Stock and Available for Delivery
Hempel Hempaprime Multi 500 Winter 45953
Hempaprime Multi 500 is a fast drying, high solids epoxy paint. It provides hard wearing and long lasting barrier protection in coating systems for severe corrosive environments. Recommended as a high-build, intermediate coat in high performance coating systems where fast handling and short overcoating times are required Meets the...
Price
£228.31
(incl. VAT)
In Stock and Available for Delivery
Surface Preparation Kits for Steel
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools) 1 x Rust-Oleum...
Price
£25.93
(incl. VAT)
In Stock and Available for Delivery