- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Hempatex Enamel 56360 is a physically drying topcoat based on acrylic resin and non-chlorinated plasticizer for optimum gloss and colour retention.
- For professional use only
- Resistant to salt water, splashes of aliphatic hydrocarbons and animal and vegetable oils
- Finishing coat in Hempatex systems in moderately to severely corrosive environment.
- Service temperature maximum 80°C (dry exposure)
Product customisation
Don't forget to save your customization to be able to add to cartHempatex Enamel 56360 is a physically drying topcoat based on acrylic resin and non-chlorinated plasticizer for optimum gloss and colour retention. The product is resistant to salt water, splashes of aliphatic hydrocarbons and animal and vegetable oils.
Features & Benefits
- For professional use only
- For new build, maintenance and repair
- For moderately to severely corrosive environment
- Physically drying
- Service temperature maximum 80°C (dry exposure)
- For exterior and interior usage
- Glossy with good gloss and colour retention
- Resistant to salt water, splashes of aliphatic hydrocarbons and animal and vegetable oils
- Finishing coat in Hempatex systems
- Apply with brush/roller, air spray or airless spray. Nozzle pressure: 150 bar [2200 psi] Nozzle orifice: 0.017"
- Recommended thinner/cleaner: Hempel Thinner 08080
Product may be specified in another film thickness than indicated depending on purpose and area of use. This will alter spreading rate, drying and curing time and overcoating interval. For best performance, avoid excessive film thickness.
If brush or roller application is used, more coats will be necessary to achieve the specified dry film thickness. Spray data are indicative and subject to adjustment. Pressure is for a material temperature of 20°C. Two coats of the topcoat may be necessary to obtain full hiding power.
Hempatex qualities are thermoplastic, therefore prolonged direct pressure at temperatures above 40°C [104°F] may cause film indentations.
Data sheet
- Manufacturer
- Hempel
- For Use By
- Professional Use
- Interior / Exterior Use
- Interior & Exterior
- For Use On
- Steel
- Application Method
- Brush/roller, air spray, airless spray
- Sheen
- Gloss
- VOC Levels
- 602 g/L
- Single, Two or Three Pack
- Single
- Pack Size
- 5L, 20L
- Application
- Brush, Roller, Spray
- Touch Dry (at 20°C)
- 30 Mins
- Coverage
- 5.8 m²/L-13 m²/L (9.1 m²/L recommended)
- Recommended Thinner/Cleaner
- Hempel's Thinner 08080
- Solids by Volume
- 32 ± 2% (White) 32 ± 2% (Aluminium Grey)
- Heat Resistance (up-to)
- Maximum, dry exposure only: 80°C
- Shelf Life (from date of manufacture)
- 60 months
- Touch Dry
- 75 minutes @ 0°C, 45 minutes @ 10°C, 30 minutes @ 20°C, 15 minutes @ 40°C
- Recommended Dry Film Thickness
- 25-55 microns (35 recommended)
- Recommended Wet Film Thickness
- 80-170 microns (110 recommended)
- UN Number
- UN1263
- Specific Gravity
- 1.1 kg/L (White) 1 kg/L (Aluminium Grey)
- Hard Dry
- 120 minutes @ 0°C, 90 minutes @ 10°C, 60 minutes @ 20°C, 40 minutes @ 40°C
- Flashpoint
- 41°C
- Colour(s)
- Fully Tintable
- Base Type
- Solvent-Based
- Suitable For Use On
- Steel
- Suitable For Use On
- Primed Surfaces
- Finish
- Gloss
- Application Method
- Brush
- Application Method
- Roller
- Application Method
- Spray
- Usages
- Aliphatic Hydrocarbons Resistance
- Usages
- Moderate to Severely Corrosive Environments
- Usages
- Atmospheric
- Usages
- Gloss Retention
- Usages
- Colour Retention
- Usages
- Animal & Vegetable Oils Resistance
- Usages
- Salt Water Resistance
- Product Usage Type
- Topcoat
- Product Range
- Hempatex
- Colour Family
- Off-White
- Colour Family
- Black
- Colour Family
- White
- Colour Family
- Neutral
- Colour Family
- Anthracite Grey
- Colour Family
- Violet
- Colour Family
- Cream
- Colour Family
- Beige
- Colour Family
- Grey
- Colour Family
- Green
- Colour Family
- Blue
- Colour Family
- Red
- Colour Family
- Brown
- Colour Family
- Pink
- Colour Family
- Orange
- Colour Family
- Purple
- Colour Family
- Yellow
- Product Type
- Polyurethane
- Environment
- Atmospheric
- Touch Dry/Dust Free (@ 20-25°C)
- 30 mins
- Product Attributes
- Gloss Retention
- Product Attributes
- Colour Retention
- Resistance to
- Salt
- Resistance to
- Aliphatic Hydrocarbons
- Resistance to
- Animal & Vegetable Oils
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Hempel Hempatex Enamel 56360 is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
Hempel Thinner 08080
Hempel's Thinner 08080 is a thinner for Hempel's Hempatex, Hempaquick, Hempathane topcoats and enamels, Hempel's Antifoulings, Globic and Dynamic, Oceanic and Olympic. For paint to be applied in a low film thickness (for instance as a "sealer coat") or if the paint has become too thick, e.g. in cold weather Tools can usually be cleaned...
Hempel Hempatex Hi-Build 46410
Hempatex HI-Build 46410 is a physically drying, high-build coating with good colour retention as a flat finish, based on acrylic resin and non-chlorinated plasticizer. Recommended as a primer, intermediate or finishing coat in Hempatex-systems in moderate corrosive environments, suitable as a self-priming repair and touch-up coating for...
Surface Preparation Kits for Steel
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools) 1 x Rust-Oleum...