- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Hempadur Avantguard 750 is an activated, zinc epoxy primer with a higher mechanical strength. Recommended as a versatile primer for long-term protection of steel in severely corrosive environments including offshore.
- For professional use only
- Service temperature up to 160°C (dry exposure), and cures down to -10°C
- In compliance with the requirements of Level 2, type II in SSPC Paint20, 2019 and ISO 12944 Part 5, 2018, and more certifications below
Description
Hempadur Avantguard 750 is an activated, zinc-rich epoxy primer in compliance with the requirements of Level 2, type II in SSPC Paint20, 2019 and ISO 12944 Part 5, 2018. The product is in full compliance with ASTM D520 type II and EU Directive 2004/42/EC, the Paints Directive on the limitation of volatile organic compounds: subcategory j.
Quick Links - Click To Jump To Section:
Features & Benefits
- For professional use only
- For new build
- Excellent mechanical strength, also in cyclic temperatures, with improved tolerance to high film thickness through high flexibility and self-healing effect
- Superior tolerance to high relative humidity during application
- Cures down to -10°C
- Service temperature up to 160°C (dry exposure)
- Apply with brush/roller, air spray or airless spray. Nozzle pressure: 220 bar [3200 psi] Nozzle orifice: 0.017-0.021"
- Recommended thinner: Above 20°C - Hempel Thinner 08450. Below 20°C - Hempel Thinner 08510
If brush or roller application is used, more coats will be necessary to achieve the specified dry film thickness. Spray data are indicative and subject to adjustment. Pressure is for a material temperature of 20°C.
Product may be specified in another film thickness than indicated depending on purpose and area of use. This will alter spreading rate, drying and curing time and overcoating interval. For best performance, avoid excessive film thickness. Overthickness should be closely controlled and never locally exceed 100 micron [3.9 mils] DFT. On irregular surfaces it is recommended to employ special care in avoiding over application.
Product Certifications
- In compliance with the requirements of Level 2, type II in SSPC Paint20, 2019 and ISO 12944 Part 5, 2018
- In compliance with ASTM D520 type II
- In compliance with EU Directive 2004/42/EC, the Paints Directive on the limitation of volatile organic compounds: subcategory j
- Meets requirements to NORSOK M-501 when used as part of a predefined paint system. Edition 6, system no. 1
- Complies with the European Fire Standard EN 13501-1, fire reaction class: B-s1, d0
Overcoating
Hempel’s specification supersedes any guidelines indicated in the overcoating table. Overcoating times are indicative for products of the same generic chemistry.
Atmospheric severe
Hempaprime Multi 500
-
- 3 hours - 90 days @ -10°C
- 90 minutes - 90 days @ 0°C
- 45 minutes - 30 days @ 20°C
- 25 minutes - 7 days @ 40°C
-
- 3 hours - 20 days @ -10°C
- 90 minutes - 15 days @ 0°C
- 45 minutes - 5 days @ 20°C
- 25 minutes - 28 hours @ 40°C
Product Details
7040-903329
Data sheet
- Manufacturer
- Hempel
- For Use By
- Professional Use
- Interior / Exterior Use
- Exterior Use
- For Use On
- Steel
- For Use On
- Steel
- Sheen
- Flat
- VOC Levels
- 336 g/L
- Single, Two or Three Pack
- Two-Pack
- Pack Size
- 10L
- Mixing Ratio
- Base 1736U : Curing agent 97043 (8.5 : 1.5 by volume)
- Application
- Brush, Roller, Spray
- Coverage
- 6.5 m²/L-16 m²/L (11 m²/L recommended)
- Recommended Thinner/Cleaner
- Above 20°C Hempel's Thinner 08450, Below 20°C Hempel's Thinner 08510, Hempel's Tool Cleaner 99610
- Max. Application Temperature
- 40°C
- Min. Application Temperature
- -10°C
- Solids by Volume
- 65 ± 2%
- Heat Resistance (up-to)
- 160°C (dry exposure)
- Finish
- Flat
- Recommended Dry Film Thickness
- 40-100 microns (60 recommended)
- Recommended Wet Film Thickness
- 60-150 microns (90 recommended)
- Pot Life
- 5 hours @ 0°C, 4 hours @ 20°C, 1½ hour @ 40°C
- Dry to Recoat
- 3 hours - 90 days @ -10°C, 90 minutes - 90 days @ 0°C, 45 minutes - 30 days @ 20°C, 25 minutes - 7 days @ 40°C
- Specific Gravity
- 2.3 kg/L
- Flashpoint
- 25°C
- Colour(s)
- 19840 Dark Grey
- Base Type
- Epoxy
- Base Type
- Solvent-Based
- Suitable For Use On
- Steel
- Finish
- Flat
- Application Method
- Brush
- Application Method
- Roller
- Application Method
- Spray
- Usages
- Low Temperature
- Usages
- Atmospheric
- Usages
- Zinc Rich /Cold Galvanising
- Usages
- Galvanic Protection
- Product Usage Type
- Primer
- Product Range
- Hempadur Avantguard
- Colour Family
- Grey
- Dry to Recoat (@ 20-25°C)
- 45 mins
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Hempel Hempadur Avantguard 750 1736G is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
You might also like
