- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
2-component, polyamide adduct cured epoxy paint with good wetting properties and low water permeability.
- Self-priming.
- Forms a hard and tough coating.
- Good resistance against abrasion and impact as well as to seawater, mineral oils, aliphatic hydrocarbons and splashes from petrol and related products.
- Harmless to grain cargoes.
- High build primer, intermediate and/or finishing coat in (heavy duty) paint systems according to specification, for repair and maintenance work at application temperatures above -10°C on hatch covers, decks, in cargo holds and ballast tanks etc.
- Service temperature: up to 150°C (dry exposure).
- For professional use only.
Product customisation
Don't forget to save your customization to be able to add to cartHempadur 45143 is a two-component, polyamide adduct cured epoxy paint with good wetting properties and low water permeability. It is selfpriming and forms a hard and tough coating which has good resistance against abrasion and impact as well as to seawater, mineral oils, aliphatic hydrocarbons and splashes from petrol and related products. Harmless to grain cargoes.
Use as a high build primer, intermediate and/or finishing coat in (heavy duty) paint systems according to specification. (As a finishing coat where a cosmetic appearance is of less importance). Also for repair and maintenance work at application temperatures above -10°C/15°F on hatch covers, decks, in cargo holds and ballast tanks etc. Hempadur 45143 is intended for use in cold/temperate climates.
Quick Links - Click To Jump To Section:
Features & Benefits
- For professional use only
- Intended for use in cold/temperate climates
- For new build, maintenance and repair
- Cures down to -10°C
- Service temperature: up to 150°C (dry exposure)
- Complies with EU Directive 2004/42/EC, The Paints Directive on the limitation of volatile organic compounds: subcategory j
- Complies with US FDA and EU food regulations for contact with dry foodstuff
- Apply with brush/roller or airless spray. Nozzle pressure: 250 bar [3600 psi] Nozzle orifice: 0.019-0.023"
- Recommended thinner: Hempel Thinner 08450
- Recommended cleaner: Hempel Thinner 08450 or Hempel Tool Cleaner 99610
If brush or roller application is used, more coats will be necessary to achieve the specified dry film thickness. Spray data are indicative and subject to adjustment. Pressure is for a material temperature of 20°C.
Product may be specified in another film thickness than indicated depending on purpose and area of use. This will alter spreading rate, drying and curing time and overcoating interval. For best performance, avoid excessive film thickness.
Epoxy coats have an inherent tendency of chalking in outdoor exposure. This does not affect the performance of the coating.
Overcoating
Hempel’s specification supersedes any guidelines indicated in the overcoating table. Overcoating times are indicative for products of the same generic chemistry.
Atmospheric medium
Hempadur 45143
-
- 36 hours - Ext. @ -10°C
- 18 hours - Ext. @ 0°C
- 4 hours - Ext. @ 20°C
-
- 36 hours - 90 days @ -10°C
- 18 hours - 45 days @ 0°C
- 4 hours - 10 days @ 20°C
Immersion
Hempadur 45143
-
- 54 hours - 90 days @ -10°C
- 27 hours - 90 days @ 0°C
- 6 hours - 30 days @ 20°C
Data sheet
- Manufacturer
- Hempel
- For Use By
- Professional Use
- Interior / Exterior Use
- Exterior Use
- Application Method
- brush/roller, airless spray
- Sheen
- Semi-gloss
- VOC Levels
- 369 g/L
- Single, Two or Three Pack
- Two-Pack
- Pack Size
- 5L, 20L
- Mixing Ratio
- Base 45148 : Curing agent 97430 (3 : 1 by volume)
- Application
- Brush, Roller, Spray
- Touch Dry (at 20°C)
- 2 hours
- Pot Life (at 20°C)
- 2 hours (spray) 4 hours (brush)
- Coverage
- Recommended: 4m2/l
Low: 7.5m2/l
High: 3.4m2/l - Recommended Thinner/Cleaner
- Hempel's Tool Cleaner 99610 Hempel's Thinner 08450
- Min. Application Temperature
- -10°C
- Solids by Volume
- 60 ± 2% (Brownish red) 58 ± 2% (Aluminium grey)
- Heat Resistance (up-to)
- Product may be specified in another film thickness than indicated depending on purpose and area of use. This will alter spreading rate, drying and curing time and overcoating interval. For best performance, avoid excessive film thickness
- Heat Resistance (up-to)
- 150°C (dry exposure)
- Shelf Life (from date of manufacture)
- 36 months
- Recommended Dry Film Thickness
- 80-175 microns (150 recommended)
- Recommended Wet Film Thickness
- 130-290 microns (250 recommended)
- Specific Gravity
- 1.3 kg/L (Brownish red) 1.2 kg/L (Aluminium grey)
- Hard Dry
- 4 hours @ 20°C
- Flashpoint
- 26°C
- Colour(s)
- Fully Tintable
- Base Type
- Solvent-Based
- Finish
- Semi-Gloss
- Application Method
- Brush
- Application Method
- Roller
- Application Method
- Spray
- Product Usage Type
- Midcoat
- Product Range
- Hempadur
- Colour Family
- Red
- Colour Family
- Brown
- Colour Family
- Pink
- Colour Family
- Orange
- Colour Family
- Purple
- Colour Family
- Yellow
- Colour Family
- Off-White
- Colour Family
- Black
- Colour Family
- Magnolia
- Colour Family
- White
- Colour Family
- Neutral
- Colour Family
- Anthracite Grey
- Colour Family
- Violet
- Colour Family
- Cream
- Colour Family
- Aluminium
- Colour Family
- Beige
- Colour Family
- Grey
- Colour Family
- Green
- Colour Family
- Blue
- Categorised As
- Marine Paints > Low Temperature Cargo & Ballast Tanks
- Seasonal
- Cold Weather
Questions
Question about the product
Fred on 2024-08-28 17:09:14 | Question:
Can you give me a mix ratio for hempel hempadur 5L gray, 45143 |
Answer from Rawlins’ Technical Team:
The mixing ratio for this product is 3 parts Base (Part A), to 1 part Curing Agent (Part B) by volume. | |
Tony on 2022-06-02 09:24:43 | Question:
I am having trouble getting the Hempathane.topcoat to adhere to the hempadur. Any recommendations on how to apply? |
Answer from Rawlins’ Technical Team:
Assuming the topcoat you are using is Hempathane HS 55610 the overcoating timings for applying are; 36 hours - 90 days @ -10°C 18 hours - 45 days @ 0°C 4 hours - 10 days @ 20°C | |
Hayley on 2021-08-29 10:10:16 | Question:
Ive been advised to use this on a car, how quickly can i respray if im wanting to lay down 2 or 3 coats? how long in-between? |
Answer from Rawlins’ Technical Team:
Drying time between coats is 4 hours at 20°C - please note that as this is an epoxy it is not UV stable and as such shouldn;t be applied to areas exposed to sun light. | |
IMPORTANT SHIPPING & DELIVERY INFORMATION
Hempel Hempadur 45143 is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
Hempel Thinner 08450
Hempel's Thinner 08450 is a general purpose thinner for Hempadur qualities. For paint to be applied in a low film thickness (for instance as a "sealer coat") or if the paint has become too thick, e.g. in cold weather Tools can usually be cleaned with the thinner prescribed for the product
Hempel Hempathane HS 55610
Hempel Hempathane HS 55610 is a glossy polyurethane topcoat, cured with aliphatic isocyanate. The product has good gloss and colour retention and contains zinc phosphate. For professional use only Recommended as VOC compliant, highbuild finishing coat for protection of structural steel in severely corrosive environment, and may be...
Surface Preparation Kits for Steel
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools) 1 x Rust-Oleum...
Hempel Tool Cleaner 99610
Hempel Tool Cleaner 99610 is a blend of strong solvents for cleaning of tools that have been used for mixing or application of two-component epoxy products. Better cleaning properties than epoxy thinners, and does not contain chlorinated solvent For cleaning of brushes, paint rollers, spray equipment, and other tools which have been used...