- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
A 2-component polyamide cured epoxy high build non-skid coating for steel decks and concrete in severely corrosive environments and/or subject to mechanical wear.
- Forms a hard, tough, abrasion resistant non-skid coating resistant to abrasion, impact, fresh water, seawater, diesel oil, splashes from petrol, jet fuel, lubricating oil and related products
- Cures at temperatures down to -10°C - service temperature up to 140°C
- Conforms to DEF STAN 80-134 Type 1 deck coating (wear and non-slip)
- Not recommended for mineral acids or strong oxidizing solutions
- For professional use only
Hempel Non-Skid 45340 is a two-component polyamide cured epoxy high build coating, it forms a hard, tough, abrasion resistant non-skid coating resistant to abrasion, impact, fresh water, seawater, diesel oil, splashes from petrol, jet fuel, lubricating oil and related products. Limited resistance to vegetable oils and to strong solvents such as ketones, esters etc. Not recommended for mineral acids or strong oxidizing solutions.
Features & Benefits
- For professional use only
- Not recommended for mineral acids or strong oxidizing solutions
- Cures at temperatures down to -10°C
- Non-skid coating on steel decks and concrete in severely corrosive environments and/or subject to mechanical wear
- Service temperature up to 140°C
- Conforms to DEF STAN 80-134 Type 1 deck coating (wear and non-slip)
- Apply with roller/brush or hopper gun. Nozzle orifice 5mm, nozzle pressure 4-5 bar [58-72.5 psi]
- Recommended tool cleaners: Hempel Thinner 08450 or Hempel Tool Cleaner 99610
- Preceding coat: Hempadur Mastic 45880, Hempadur 15590, Hempadur 15570 or Hempadur 45143
Spray data is indicative and subject to adjustment
Data sheet
- Manufacturer
- Hempel
- For Use By
- Professional Use
- Interior / Exterior Use
- Exterior Use
- For Use On
- Steel
- Application Method
- Hopper gun / Roller / Brush
- Sheen
- Flat
- VOC Levels
- 335 g/l
- Single, Two or Three Pack
- Two-Pack
- Product Certifications
- Conforms to DEF STAN 80-134 Type 1 deck coating (wear and non-slip).
- Pack Size
- 20L
- Mixing Ratio
- 4 : 1 by volume
- Application
- Hopper gun / Roller / Brush
- Fully Cured (at 20°C)
- 7 days
- Pot Life (at 20°C)
- 2 hours
- Coverage
- 3.2 m2 /l
- Recommended Thinner/Cleaner
- HEMPEL'S THINNER 08450 or HEMPEL'S TOOL CLEANER 99610
- Min. Application Temperature
- -10°C
- Solids by Volume
- 63 ± 1%
- Heat Resistance (up-to)
- 140°C
- Recommended Dry Film Thickness
- 200 micron
- Recommended Wet Film Thickness
- Not applicable
- Specific Gravity
- 1.7 kg/litre
- Flashpoint
- 25°C
- Colour(s)
- BS 640 Extra Dark Sea Grey
- Base Type
- Solvent-Based
- Suitable For Use On
- Concrete
- Suitable For Use On
- Steel
- Suitable For Use On
- Concrete Floors
- Suitable For Use On
- Steel Floors
- Suitable For Use On
- Steel Decks
- Suitable For Use On
- Concrete Decks
- Finish
- Flat
- Application Method
- Brush
- Application Method
- Roller
- Components
- 2K
- Product Usage Type
- Anti-Slip
- Colour Family
- Grey
- Categorised As
- Marine Paints > Low Temperature Deck Coatings
- Seasonal
- Cold Weather
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Hempel Non-Skid 45340 is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
Hempel Thinner 08450
Hempel's Thinner 08450 is a general purpose thinner for Hempadur qualities. For paint to be applied in a low film thickness (for instance as a "sealer coat") or if the paint has become too thick, e.g. in cold weather Tools can usually be cleaned with the thinner prescribed for the product
Hempel Hempadur 15570
Hempadur 15570 is a two component, polyamide-adduct cured epoxy paint, which cures to a strong and highly corrosion resistant coating, at temperatures down to -10°C. Maintenance and repair primer, intermediate, and/or finishing coat in Hempadur systems in severely corrosive environment, and many more uses below EC-type examined as a low...
Hempel Hempadur 15590
Hempadur 15590 is a two-component epoxy primer coating especially for use on surfaces exposed to severe abrasion. For professional use only Blast primer for heavy duty epoxy systems on submerged and non-submerged areas according to specification Air or airless spray application, for new builds, maintenence and repair More Information...
Hempel Hempadur Mastic 45880
Hempadur Mastic 45880 is a polyamide curing, high solids epoxy paint. It forms a hard and tough coating, has good wetting properties and cures at low temperature. Recommended use as a self-primed, surface tolerant paint system, or as an intermediate or a topcoat in systems where low VOC and high film build are required EC-type examined as...
Hempel Hempadur 45143
2-component, polyamide adduct cured epoxy paint with good wetting properties and low water permeability. Self-priming. Forms a hard and tough coating. Good resistance against abrasion and impact as well as to seawater, mineral oils, aliphatic hydrocarbons and splashes from petrol and related products. Harmless to grain cargoes. High...
Hempel Tool Cleaner 99610
Hempel Tool Cleaner 99610 is a blend of strong solvents for cleaning of tools that have been used for mixing or application of two-component epoxy products. Better cleaning properties than epoxy thinners, and does not contain chlorinated solvent For cleaning of brushes, paint rollers, spray equipment, and other tools which have been used...