- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Hempadur 47200 is a two-component, polyamine adduct cured epoxy paint with a very short drying time. Contains micaceous iron oxide and zinc phosphate. The product cures at temperatures above -10°C and forms a tough and hardwearing coating.
- For professional use only
- Fast drying primer or intermediate coat in Hempadur systems especially suited for fast recoatable shop applications. Can be specified for on-site application. The product can also be specified where long overcoating intervals to polyurethane topcoats are expected (typically as travel coat).
- Complies with EU Directive 2004/42/EC, The Paints Directive on the limitation of volatile organic compounds: subcategory j
- Service temperature up to 120°C (dry exposure)
Hempadur 47200 is a two-component, polyamine adduct cured epoxy paint with a very short drying time. Contains micaceous iron oxide and zinc phosphate. The product cures at temperatures above -10°C and forms a tough and hardwearing coating.
For use as a fast drying primer or intermediate coat in Hempadur systems especially suited for fast recoatable shop applications. Can be specified for on-site application. The product can also be specified where long overcoating intervals to polyurethane topcoats are expected (typically as travel coat).
Quick Links - Click To Jump To Section:
Features & Benefits
- For professional use only
- Two-component, polyamine adduct cured epoxy paint
- Very short drying time - surface dry in 20 minutes @ 20°C
- Contains micaceous iron oxide and zinc phosphate
- Cures at temperatures above -10°C
- Complies with EU Directive 2004/42/EC, The Paints Directive on the limitation of volatile organic compounds: subcategory j
- For new build, maintenance and repair
- Apply with brush/roller, air spray (nozzle orifice: 0.015") or airless spray (nozzle pressure: 150 bar [2200 psi] nozzle orifice: 0.015-0.021")
- Sevice temperature: up to 120°C (dry exposure)
If brush or roller application is used, more coats will be necessary to achieve the specified dry film thickness. Spray data are indicative and subject to adjustment. Pressure is for a material temperature of 20°C.
Product may be specified in another film thickness than indicated depending on purpose and area of use. This will alter spreading rate, drying and curing time and overcoating interval. For best performance, avoid excessive film thickness.
Epoxy coats have an inherent tendency of chalking in outdoor exposure. This does not affect the performance of the coating.
Overcoating
Hempel’s specification supersedes any guidelines indicated in the overcoating table.
Atmospheric medium
Hempadur 47200/Hempathane HS 55610
-
- 9 hours - Ext. @ -10°C
- 4½ hours - Ext. @ 0°C
- 60 minutes - Ext. @ 20°C
Data sheet
- Manufacturer
- Hempel
- For Use By
- Professional Use
- Interior / Exterior Use
- Exterior Use
- For Use On
- Steel
- Application Method
- Brush/roller, air spray, airless spray
- Sheen
- Please consult Hempel’s Guideline on aluminium pigmented coatings.
- VOC Levels
- 350 g/L
- Single, Two or Three Pack
- Two-Pack
- Product Certifications
- Complies with EU Directive 2004/42/EC, The Paints Directive on the limitation of volatile organic compounds: subcategory j
- Pack Size
- 20L
- Mixing Ratio
- Base 47209 : Curing agent 97100 (4 : 1 by volume)
- Application
- Brush, Roller, Spray
- Pot Life (at 20°C)
- 3 hours
- Coverage
- 3.2 m²/L-8.6 m²/L (6.5 m²/L recommended)
- Recommended Thinner/Cleaner
- Hempel's Tool Cleaner 99610 Hempel's Thinner 08450
- Min. Application Temperature
- -10°C
- Solids by Volume
- 65 ± 2%
- Heat Resistance (up-to)
- 120°C (dry exposure)
- Shelf Life (from date of manufacture)
- 36 months (Base) 24 months (Curing Agent)
- Recommended Dry Film Thickness
- 75-200 microns (100 recommended)
- Recommended Wet Film Thickness
- 120-310 microns
- Drying time
- Surface dry: 20 minutes @ 20°C
- Dry to Recoat
- 9 hours - Ext. @ -10°C, 4½ hours - Ext. @ 0°C, 60 minutes - Ext. @ 20°C
- Specific Gravity
- 1.5 kg/L
- Hard Dry
- 120 minutes @ 20°C
- Flashpoint
- 30°C
- Colour(s)
- 13610 Grey
- Base Type
- Solvent-Based
- Base Type
- Epoxy
- Suitable For Use On
- Steel
- Finish
- Flat
- Application Method
- Brush
- Application Method
- Roller
- Application Method
- Spray
- Usages
- Zinc Phosphate
- Usages
- MIO
- Usages
- Intermediate
- Usages
- Low Temperature
- Usages
- Atmospheric
- Product Usage Type
- Primer
- Product Range
- Hempadur
- Colour Family
- Grey
- Dry to Recoat (@ 20-25°C)
- 60 mins
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Hempel Hempadur 47200 is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT