Follow us on:

Quelfire QuelStop Intumescent HPE Graphite Sealant
Quelfire QuelStop Intumescent HPE Graphite Sealant
Quelfire QuelStop Intumescent HPE Graphite Sealant
Quelfire QuelStop Intumescent HPE Graphite Sealant

Quelfire QuelStop Intumescent HPE Graphite Sealant

QUE7141

High expansion intumescent acrylic based graphite sealant used to provide a fire rated linear joint or gap seal and to maintain the fire rating of walls and floors where they have been penetrated by services as part of the QuelStop Fire Batt System or direct to the substrate. Up to 4 hours fire rating (EI240).

May be used for sealing around services such as cable, cable bundles, trays, ladders, combustible pipes, combustible insulations, either as part of a seal directly within the wall or floor substrate.

Colour
Size
£8.29(incl. VAT)
£6.91(ex. VAT)
Quantity
Please choose your colour
Available for Delivery (See Delivery Options Below)

No queries yet, leave the first!
Description

Quick Links - Click To Jump To Section:




Features & Benefits


  • CE Marked
  • Suitable for use in flexible walls, rigid walls and floors
  • Suitable for use in QuelStop Fire Batts
  • Suitable for use around cables, cable bunches, cable trays and cable ladders
  • Suitable for use around plastic pipes, metallic pipes and insulated non-combustible pipes
  • Suitable to use with Lubrizol CPVC piping systems and materials, such as FlowGuard pipe and fittings and BlazeMaster fire sprinkler systems
  • Suitable to use with Spears CPVC Products, such as FlameGuard, LabWaste and EverTuff
  • Suitable for linear joints up to 20mm wide
  • Suitable for low movement joints of ≤7.5% and remains flexible



Standards & Approvals


  • Fire resistance testing to BS EN 1366-3:2009
  • Fire resistance testing to BS EN 1366-4: 2006
  • Classified to EN 13501-2: 2007 + A1: 2009
  • CE Marked
  • FBC™ System Compatible
  • Spears® product compatible



Application & Installation


QuelStop CE Marked HPE Graphite Sealant can also be used as a linear joint seal in which cases, a mineral wool or PE backing rod, can be used as a backing material to ensure the correct depth of QuelStop CE Marked HPE Graphite Sealant is applied in order to achieve the required performance.

All surfaces must be clean and free of any bond breaking contamination prior to application of the sealant.

The sealant should not be applied if the ambient temperature is below 5°C or above 40°C, as the adhesion may be impaired.

The QuelStop Intumescent HPE Graphite Sealant should be installed to the correct annulus and depth which depends on the penetrating services / material specification. The total annular space should be filled with compacted QuelStop HPE Sealant which is applied through the use of a standard sealant gun and once applied should be lightly compacted and smoothed off with a spatula to produce a professional and neat finish.

For full details on application and installation, refer to all available documentation and installation details in the data sheets tab further above, for:

  • To services penetrating concrete floors with correct size hole
  • To services penetrating walls with correct size hole
  • To services penetrating walls and floors with an oversized hole



IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contacted to obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and Conditions and should be applied only by an individual with the necessary expertise and experience. We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.



Product Details
7141-904342

Data sheet

Manufacturer
Quelfire
For Use By
Professional Use
Interior / Exterior Use
Interior Use
Pack Size
310ml
Base Type
Acrylic-Based
Suitable For Use On
Plastic Pipes
Suitable For Use On
Non-Combustible Pipes
Suitable For Use On
Metallic Pipes
Suitable For Use On
CPVC Pipes
Suitable For Use On
Walls
Suitable For Use On
Floors
Suitable For Use On
Cables
Application Method
Sealant Gun
Product Usage Type
Sealant
Colour Family
Black
Fire Rating
240 Minutes
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.

Questions

Question about the product

* Required fields
(read)

Be the first to ask a question about this product!

IMPORTANT SHIPPING & DELIVERY INFORMATION

Quelfire QuelStop Intumescent HPE Graphite Sealant is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.

Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.

Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.

All delivery costs below are excluding VAT


You might also like