Quick Links - Click To Jump To Section:

   
• Features & Benefits
• Standards & Approvals
• Application & Installation

Features & Benefits

• Up to 2 hour fire rating (EI120)
• Supplied in a 25m coil and cut to length on site
• No mechanical fixings required
• Suitable for use in flexible walls and rigid walls
• Suitable for use in QuelStop Fire Batt System
• Suitable for use with QF2 Fire Protection
• Compound in concrete floors
• Suitable for PVC, HDPE and PP Pipes
• Suitable for plastic pipes up to 160mm diameter
• Suitable for use around metal pipes with insulation
• Suitable for use around pipe insulation up to 50mm thick
• Performance unaffected by weathering (Type X Durability)
• CE Marked

Standards & Approvals

• Tested to BS EN 1366-3:2009
• CE Marked
• Type X Durability Testing
• Classified According to EN 13501-2: 2007 + A1: 2009

Application & Installation

QuelCoil is simply wrapped around the services to achieve the correct number of layers, it can be cut to length with a sharp knife and then sealed with a self-adhesive fibre reinforced tape.

There must be no gap around the outside of the QuelCoil Intuwrap once installed so it is important to drill holes for services accurately taking into consideration the number of layers of QuelCoil required. For oversized holes in walls it will be necessary to install the QuelCoil in conjunction with the QuelStop Fire Batt system. Where holes in floors are incorrectly drilled oversize or larger square holes are left or formed then the hole will need shuttering and the whole penetration backfilling with QF2 Fire Protection Compound.

There must be no gap around the QuelCoil Intuwrap and the Intuwrap must be fitted flush with the underside of the concrete slab or fire seal and/or flush with the face of the wall or QuelStop Fire Batt.

Full installation details and step by step instructions are available to download in the data sheets tab further above, for:

• Within a correctly drilled hole in a wall
• With QF2 Fire Protection Compound seal - oversized floor hole
• In conjunction with QuelStop Fire Batt seal - oversized wall hole
• Insulated Metal Pipes Penetrating a flexible wall (75mm or thicker)
• Plastic Pipe Penetrating a flexible wall (75mm or thicker)
• Insulated Copper or Steel Pipe Penetrating a flexible or rigid wall (75mm or thicker)
• Plastic Pipe Penetrating a flexible or rigid wall (75mm or thicker)
• Insulated Cooper or Steel Pipe Penetrating a flexible or rigid wall (100mm or thicker)
• Plastic Pipes Penetrating a flexible or rigid wall (100mm or thicker)
• Insulated Cooper or Steel Pipe Penetrating a flexible or rigid wall (100mm or thicker)
• Insulated Copper or Steel pipes Penetrating a flexible wall (100mm or thicker)
• Plastic Pipes Penetrating a flexible wall (100mm or thicker)
• Plastic Pipe Penetrating a flexible or rigid wall (100mm or thicker)
• U-PVC Pipes penetrating a Plasterboard timber framed ceiling (242mm or thicker)
• Plastic Pipes penetrating a Profiled Deck
• Insulated Copper/ Steel Pipes penetrating a rigid floor (150mm or thicker)
• U-PVC Pipes penetrating a rigid floor (150mm or thicker)
• HDPE Pipes penetrating a rigid floor (150mm or thicker)
• PP Pipes penetrating a rigid floor (150mm or thicker)

IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contacted to obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and Conditions and should be applied only by an individual with the necessary expertise and experience. We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.