Quick Links - Click To Jump To Section:

   
• Features & Benefits
• Application Notes
• Limitations

Features & Benefits

• Hard wearing - durable, low maintenance costs
• Provides a dust-proof easily cleaned surface, resistant to most oils and liquids
• High resistance to a wide range of industrial chemicals
• Hygienic - impervious finish provides easily cleaned surface
• Attractive - available in clear and a range of colours to improve the working environment
• Cured film forms a hard, semi-matt seal to concrete and other substrates
• Suitable for use as a coating over Fosroc Cemtop GP and Fosroc Cemtop XD
• Applied by brush or lambswool roller
• Complies with BS 476, Part 7:1971 - Class 1 spread of flame
• Complies with EN1504-2: Surface protection systems method 6.1
• Suitable for use on Concrete (new and old) and Asphalt floors
• Nitoflor FC130 is non-flammable
• Please refer to the Product Data Sheet for full details of:
  • Properties
  • Standards Compliance
  • Application Instructions
  • Cleaning
  • Estimation
  • Storage
  • Precautions

Application Notes

• All coating work to be carried out in accordance with the relevant sections of BS 6150:2006, Painting of Buildings - Code of Practice
• Because Nitoflor FC130 is a relatively thin coating, the substrate must be fine textured. Any surface irregularities may show through causing excessive wear on high spots and changing the perceived colour of the coating
• New concrete floors: Unless specially water-reduced, the floor should be at least 28 days old and give a hygrometer reading not exceeding 80% RH when tested in accordance with BS 8203 Appendix A
• Asphalt Floors: Nitoflor FC130 can be applied to asphalt floors provided they are at least 6 months old
• Nitoflor FC130 can be used to overcoat Fosroc Cemtop XD to provide a more easily cleaned, chemically resistant surface. Apply two coats of Nitoflor FC130 as described in the data sheet, the first of which must be applied within 6 hours after the installation of Cemtop XD
• A fine textured anti-slip finish may be achieved by the addition of one 0.9 kg sachet of Nitoflor Anti-slip Grains stirred in towards the end of the mixing process. (Note: This will reduce overall coverage rate)

Please see the Product Data Sheet for detailed information.

Limitations

• Nitoflor FC130 should not be applied onto surfaces known to or likely to suffer from rising damp or have a relative humidity greater than 80% as measured in accordance with BS 8203 Appendix A or by a Vaisala Thermohygrometer type HMI 31
• The durability of Nitoflor FC130 in foot traffic areas is reduced in areas of very heavy traffic such as around work benches, drinks machines, etc. It is advisable to specify additional coats in such areas
• The low odour characteristics of Nitoflor FC130 are not necessarily an indication of non-tainting characteristics
• Where tainting of foodstuffs during application is possible we recommend separate tests are carried out in this instance, please contact please contact our Technical Department on 0113 2455450 (option 2) or send a message to [email protected] for details
• Nitoflor FC130 should not be applied at temperatures below 10°C or where ambient relative humidity exceeds 85%
• The manufacture of Nitoflor FC130 is a batch process and despite close manufacturing tolerances variation may occur between batches. Fosroc recommends using material from one batch only as the finish topcoat

IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contacted to obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and Conditions and should be applied only by an individual with the necessary expertise and experience. We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.