- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Fosroc Conbextra GP is a high-flow, non-shrink, cementitious grout conforming to the requirements of BS EN 1504-3 Class R4 and BS EN 1504-6: Anchoring of reinforcing steel bar.
Suitable for free flow, cementitious grouting of gap thicknesses 10 to 75 mm.
Recommended applications include stanchion baseplates, joints between pre-cast concrete panels, grouting applications where pouring access is restricted, anchoring of reinforcing steel bars, installation of tie bars. Trowelling consistency can be used for bedding and in lieu of dry packs.
Quick Links - Click To Jump To Section:
Features & Benefits
- General purpose grout for most standard applications
- Non-shrink
- High strength
- Chloride free
- Can be used at flowable or trowelable consistency
- Supplied as a ready to use dry powder. The low water requirement ensures high early strength and long-term durability
- Conbextra GP is a blend of Portland cements, graded fillers and chemical additives. The filler grading produces a highly flowable grout which will not segregate or bleed
- Class A1 Non-Combustible Fire Classification
- Fosroc Conbextra GP is non-flammable
- Yield: Allowance should be made for wastage when estimating quantities required. The approximate yield per 25 kg bag for different consistencies is:
- Trowelable - 12 litres
- Flowable - 13.25 litres
- Please refer to the Product Data Sheet for full details of:
- Specification Clause
- Properties
- Mixing
- Application Instructions
- Coverage
- Cleaning
- Storage
- Health and Safety
Application Notes
- For a minimum of 2 hours prior to grouting, the area of cleaned foundation should be flooded with fresh water
- Immediately before grouting takes place, any free water should be removed
- Particular care should be taken to blow out all bolt holes and pockets
- Where water soaking is impossible contact our Technical Department on 0113 2455450 (option 2) or send a message to [email protected] for advice
- Place the grout within 20 minutes of mixing to gain the full benefit of the expansion process
- For mixing quantities up to 50 kg a 1150 watt, 280 to 640 rpm, 110 volt drill, fitted with an MR3 Mixing Paddle is suitable
- For best results a mechanically powered grout mixer should be used
- Larger quantities will require a high shear vane mixer. Do not use a colloidal impeller mixer
- Mixing Ratios:
- Flowable: 4.0 - 4.5 litres of water per 25Kg bag
- Trowelable: 3.4 - 3.6 litres of water per 25Kg bag
Please see the Product Data Sheet for detailed information.
Limitations
Low Temperature Working:
- When the air or contact surface temperatures are 5°C or below on a falling thermometer, warm water (30°C to 40°C) is recommended to accelerate strength development
- Substrates should be free from ice
- For ambient temperatures below 10°C the grout consistency should be flowable and the formwork should be maintained in place for at least 36 hours
- Normal precautions for winter working with cementitious materials should then be adopted, specifically protecting the grout from freezing in the first 48 hours after placing
High Temperature Working:
- At ambient temperatures above 35°C the mixed grout should be stored in the shade
- Cool water (below 20°C) should be used for mixing the grout
IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contacted to obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and Conditions and should be applied only by an individual with the necessary expertise and experience. We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.
Data sheet
- Manufacturer
- Fosroc
- For Use By
- Professional Use
- For Use On
- Concrete
- Single, Two or Three Pack
- Single
- Pack Size
- 25kg
- Application
- Trowel
Flow - Coverage
- Approximate yield per 25 kg bag for different consistencies is: Flowable: 4.0 - 4.5 litres per 25Kg bag Trowelable: 3.4 - 3.6 litres per 25Kg bag
- Shelf Life (from date of manufacture)
- 12 months - If stored in high temperature and high humidity locations the shelf life may be reduced to less than 6 months.
- UN Number (Base)
- N/A
- Drying time
- 6 hours
- Suitable For Use On
- Concrete
- Suitable For Use On
- Concrete Floors
- Application Method
- Trowel
- Manufacturer
- Fosroc
- Usages
- Precision Grouts Cementitious
- Product Usage Type
- Grout
- Product Range
- Conbextra
- Categorised As
- Repairs > Low Temperature Grouts
- Seasonal
- Cold Weather
Questions
Question about the product
Ciaran on 2024-02-07 17:50:54 | Question:
Would this product erode or damage aluminium? |
Answer from Rawlins’ Technical Team:
Due to aluminium being non-ferrous, if applying Fosroc Conbextra GP to this surface type it shouldn't corrode, and due to being essentially a concrete based product, this is inert once cured. We would recommend to test on a small area prior to full application. | |
Colin Jones on 2022-11-26 11:28:00 | Question:
Would this product be suitable for repairing damage in approx 1m square of a concrete slab |
Answer from Rawlins’ Technical Team:
This product is a high-flow, non-shrink, cementitious grout normally used for repairing joints, reinforcing steel bars where pouring access is restricted. Please can you provide more information on the area to be repaired with pictures of the area to [email protected] | |
Gareth on 2022-07-11 15:00:09 | Question:
Hi. We have had some of this product leak onto a timber staircase this has caused a black stain on removing the excess product. Can you help by recommending a possible product to remove. |
Answer from Rawlins’ Technical Team:
Unfortunately we do not have a product to recommend to remove this. | |
IMPORTANT SHIPPING & DELIVERY INFORMATION
Fosroc Conbextra GP is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT