- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
One part, low modulus sealant based on hybrid silyl modified polyether (“MS”) technology. Suitable for use for sealing joints in concrete, brickwork, blockwork, perimeter sealing around doors and windows, and non-trafficked floor joints.
- Applied to joints between 5mm and 35mm wide
- For joint widths exceeding 35mm, please contact Rawlins Technical on 0113 2455450 (option 2) or send a message to [email protected]
- Can be applied to damp substrates
Please Note: This product is made to order with an approximate lead time of 2-3 Weeks
Please note: Colours shown are for illustrative purposes only.
Quick Links - Click To Jump To Section:
Features & Benefits
- Adhesion to most common building materials
- Single component with fast rate of cure
- Easy to apply
- Can be applied to damp substrates
- Primer-less for most applications (see “Priming” section of the Product Data Sheet)
- UV resistant and colour stable
- Performs as an acoustic sealant
- Environmentally friendly
- Complies to EN 15651-1:2012: Sealants for façade elements
- Please refer to the Product Data Sheet for full details of:
- Standards Compliance
- Surface Preparation
- Priming
- Application Instructions
- Finishing
- Estimating
- Cleaning
- Storage
- Health and Safety
Application Notes
- A primer is not normally required. In joints subjected to high movement or where intermittently immersed during service Fosroc Primer MS2 is recommended
- Nitoseal MS60 should be applied between 30 minutes and 4 hours after priming.
- If a joint is left unsealed for more than 4 hours, the primer should be removed by grit blasting or grinding and the joint re-primed
Please see the Product Data Sheet for detailed information.
Limitations
- Do not apply at temperatures below 5°C
- Not suitable for water immersed conditions. Nitoseal MS600 should be used for this application
- Not suitable for contact with bituminous materials
- Not suitable for trafficked floor joints. Nitoseal MS300 should be used for this application
- May cause staining to decorative stone. For a non-staining sealant use Nitoseal MS100
- Not suitable for contact with solvents, oil or petrol
- Should only be over-coated with a compatible, flexible coating capable of accommodating the expected movement in the joint
- Over-coating may reduce the movement capability of the sealant
- Confirm compatibility with coating if applied to painted surfaces
Data sheet
- Manufacturer
- Fosroc
- For Use By
- Professional Use
- For Use On
- Concrete
Brickwork
Blockwork
Doors And Windows (Perimeter Sealing)
Non-Trafficked Floor Joints - Single, Two or Three Pack
- Single
- Application
- Sealant Gun
- Coverage
- Please see Product Data Sheet as coverage is dependent on joint size and depth
- Suitable For Use On
- Concrete Floors
- Suitable For Use On
- Blockwork
- Suitable For Use On
- Brickwork
- Suitable For Use On
- Doors And Windows (Perimeter Sealing)
- Suitable For Use On
- Floor Joints (Non-Trafficked)
- Suitable For Use On
- Doors (Perimeter Sealing)
- Suitable For Use On
- Windows (Perimeter Sealing)
- Suitable For Use On
- Concrete
- Application Method
- Sealant Gun
- Manufacturer
- Fosroc
- Usages
- Damp Tolerant
- Product Usage Type
- Sealer
- Product Range
- Nitoseal
- Colour Family
- Black
- Colour Family
- White
- Colour Family
- Beige
- Colour Family
- Grey
- Colour Family
- Red
- Colour Family
- Brown
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Fosroc Nitoseal MS60 is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
Fosroc Nitoseal MS300
Fosroc Nitoseal MS300 is a one part, high modulus, damp tolerant, floor and pavement joint sealant based on hybrid silyl modified polyether technology. Suitable for use for sealing saw-cut and movement joints in internal floors, and external joints where abrasion resistance is required. It can also be used for external facade joints where a...
Fosroc Nitoseal MS600
Fosroc Nitoseal MS600 is a one part, engineering sealant for immersed conditions based on hybrid silyl modified polyether technology. Suitable for use for sealing movement joints in buildings and civil engineering structures including joints that will be subject to intermittent or permanent immersion. Typical applications include - Potable...
Fosroc Nitoseal MS100
Fosroc Nitoseal MS100 is a one-part, primerless*, damp tolerant, non-staining façade sealant producing a tough, durable elastomeric seal. Uses: Formulated for stain-free sealing of joints in and around concrete, brick, masonry, pre-cast panels, stone cladding, windows, doors and fibre cement sheeting. Suitable for use over a wide range of...