Hi, we have purchased the speed patch pourable do we have to mix the whole batch at once or can we mix small amounts? regards Andy Eagles

Directions for Use Remove the bag of powder from the plastic bucket and use the empty bucket or other suitable container for mixing. To achieve a pourable mix, add 3 parts of powder to one part of water (by volume). Due to the short working life of the mixed product, we recommend you carry out the mixing near to the repair, not near to the water source. It’s also useful to have a bucket of water nearby, so you can quickly immerse and clean the tools after use. Put the water into the empty bucket or container and gradually add the powder stirring constantly to achieve a pourable slurry. For small quantities mix by hand using a flat bladed tool such as a spatula, and for larger quantities use a mixer fitted into a slow speed electric drill. Do not add excessive water or drying time will be extended and the performance may be impaired. As the mixture hardens quickly, pour the Speed Patch Pourable into the hole to be repaired immediately. We do not recommend re-stirring as this could potentially weaken the final repair. Do not mix more than you can use within a few minutes (5 - 10 minutes at 20°C). The remaining powder can be stored for future use. Application When a smooth consistency is achieved, simply pour Speed Patch in to the hole. If the product has been properly mixed it will self-level and will need minimal trowelling. Speed Patch Pourable can be applied in any depth between 5 mm and 100 mm. Repairs in lightly trafficked areas can be feather edged, but thin edges are not recommended for medium or heavily trafficked repairs.

Rust-Oleum Speed Patch Pourable Grade

Reference AXPSP25

Brand Rust-Oleum

Search ID RUS739

Available in Grey.
Quick-setting, pourable material for fast repairs on concrete surfaces. Suitable for deep or shallow repairs.
Internal or external use.
Accepts heavy traffic two hours after application.

Colour

Grey

Size

£139.92(incl. VAT)

£116.60(ex. VAT)

Quantity

Please choose your colour

In Stock and Available for Delivery (See Delivery Options Below)

ColourPicker Explained

In general we sort colours for products into 2 main groups - ‘Ready Mixed’ and ‘Tinted’.
Tinted colours will always be more expensive than Ready Mixed colours as they need to be produced at the time of order using a tinting machine dispensing colourant into a base*.
During busy periods, this means that tinted colours could take longer, for example – a ready mixed colour ordered on a 3-5 day delivery might arrive within 3 days, however a tinted colour might take the full 5 days to arrive.

To find Ready Mixed colours, search "ready mixed" or select the Ready Mixed 'colour chart'. To see Tinted colours select a colour chart such as RAL, BS, NCS, etc. or search for a colour/hue to see available or related options.

To ensure fair pricing, we split colours into ‘Price Bands’ to group together similar priced colours. If you wish to search for the cheapest tinted colours, always select Price Band 1.

We make every effort to list all available colours, however we also offer a colour match service which can be accessed by contacting our Technical Team on 0113 245 5450 (option 2) or emailing [email protected]

*Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colour

Colour reproduction of the Products on the Site is limited by the technology used to deliver web pages and by the colour representation of Customer’s own monitor and computer set-up. We have made every effort to display as accurately as possible the colours of our Products but we cannot guarantee that the colour shown on Customer’s monitor’s display will accurately reflect the colour of the Product on delivery. We recommend that Customer first purchases the smallest Product available or access an industry standard colour chart in person (and not digitally) to ensure that the colour is acceptable for its purposes.

1 question about the product

Description

Rust-Oleum Speed Patch Pourable Grade - High Performance Concrete Repairs

Speed Patch Pourable Grade is a high-performance, single-pack repair solution designed for quick and efficient concrete repairs. Whether you need to fix deep holes or shallow cracks, this versatile material sets rapidly, allowing for heavy traffic just two hours post-application. Suitable for both indoor and outdoor use, it is the perfect solution for industrial and professional repair projects.

Features and Benefits

Easy to Mix: Add water and mix for a smooth, pourable consistency.
Fast Setting: Ready for heavy traffic in just two hours, minimizing downtime.
Temperature Resilient: Can be applied at low temperatures, down to 5°C.
Versatile Depth Application: Suitable for repairs ranging from 5mm to 100mm in depth.
High Compressive Strength: Offers a robust repair solution with 45 MN/m² compressive strength.
Environmentally Conscious: Complies with environmental regulations and does not contain harmful substances.

Application Instructions

Ensure the substrate is clean, free of oil or contaminants, and that any loose material is removed. For the best results, edges of the repair area should be cut to avoid feather edging in heavy traffic zones. Mix the powder with water in the provided bucket, creating a pourable slurry. Pour immediately into the repair area, allowing it to self-level. Avoid re-stirring as this may weaken the repair.

Usage Restrictions

Speed Patch Pourable is designed for use on concrete surfaces and should not be used on sloping floors or exposed edges due to its pourable nature. Do not apply at temperatures below 0°C. For detailed application instructions and safety measures, always refer to the downloadable data sheet.

Recommended Products

For surface finishing, consider using suitable floor paints post-application. Ensure thorough mixing and correct application techniques for optimal results. Always check the compatibility of any additional products with Speed Patch Pourable Grade.

Health and Safety

UN Number: N/A
This product is classified as hazardous under Regulation (EC) 1272/2008. It contains portland cement which can cause serious eye damage and may trigger an allergic skin reaction. Always wear protective gloves and face protection. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Dispose of contents and container in accordance with local, regional, national, and international regulations.

Product Details

Reference 739-40959

Data sheet

For Use By: Consumer Use
Interior / Exterior Use: Interior & Exterior
For Use On: Concrete
Application Method: Rake
Trowel
Colour: Standard / Ready Mixed
Single, Two or Three Pack: Single
Pack Size: 25KG
Mixing Ratio: Powder: Water 3 : 1 (Volume)
Application: Rake/Trowel
Dry to Handle (at 20°C): 2 hours
Fully Cured (at 20°C): 24 hours
Coverage: 0.5m² @ 25mm thick per 25kg
Compressive Strength (at 20°C): 45 MN/m²
Max. Application Temperature: 20ºC
Min. Application Temperature: 5ºC
Shelf Life (from date of manufacture): 5 years from date of production in unopened cans, if stored in dry, well ventilated areas, not in direct sunlight at temperatures between 5° and 35°C.
Touch Dry: 30 mins
UN Number: N/A
Suitable For Use On: Concrete Floors
Application Method: Trowel
Application Method: Rake
Usages: Repair Materials
Product Usage Type: Repair
Fastest Delivery: Next Working Day
Colour Family: Grey
Categorised As: Repairs > Low Temperature Repair Mortars
Seasonal: Cold Weather

Attachments

Download

Product Data Sheet

Download

Safety Data Sheet

Download

Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.

Questions

Question about the product

Name ^*

Email ^*

Question ^*

^* Required fields

I have read and agree to the conditions of use (read)

andy eagles on 2017-03-28 09:23:46	Question: Hi, we have purchased the speed patch pourable do we have to mix the whole batch at once or can we mix small amounts? regards Andy Eagles
	Answer from Rawlins’ Technical Team: Directions for Use Remove the bag of powder from the plastic bucket and use the empty bucket or other suitable container for mixing. To achieve a pourable mix, add 3 parts of powder to one part of water (by volume). Due to the short working life of the mixed product, we recommend you carry out the mixing near to the repair, not near to the water source. It’s also useful to have a bucket of water nearby, so you can quickly immerse and clean the tools after use. Put the water into the empty bucket or container and gradually add the powder stirring constantly to achieve a pourable slurry. For small quantities mix by hand using a flat bladed tool such as a spatula, and for larger quantities use a mixer fitted into a slow speed electric drill. Do not add excessive water or drying time will be extended and the performance may be impaired. As the mixture hardens quickly, pour the Speed Patch Pourable into the hole to be repaired immediately. We do not recommend re-stirring as this could potentially weaken the final repair. Do not mix more than you can use within a few minutes (5 - 10 minutes at 20°C). The remaining powder can be stored for future use. Application When a smooth consistency is achieved, simply pour Speed Patch in to the hole. If the product has been properly mixed it will self-level and will need minimal trowelling. Speed Patch Pourable can be applied in any depth between 5 mm and 100 mm. Repairs in lightly trafficked areas can be feather edged, but thin edges are not recommended for medium or heavily trafficked repairs.

IMPORTANT SHIPPING & DELIVERY INFORMATION

Rust-Oleum Speed Patch Pourable Grade is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.

Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.

Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.

All delivery costs below are excluding VAT

Repair Materials Application Kit

Repair Materials Application Kit provides everything you need to apply our repair products to floors, walls and other surfaces. It makes on site application much easier by providing everything you need to mix, prepare, apply and clean up in one handy kit. Each Kit Contains: 4 Rubble Sacks for Waste 750ml White Spirit 10" Steel Float 7"...

£45.86 (incl. VAT)

Shop now

Temporarily Out-of-Stock

Follow us on:

Rust-Oleum Speed Patch Pourable Grade

Rust-Oleum Speed Patch Pourable Grade

Rust-Oleum Speed Patch Pourable Grade - High Performance Concrete Repairs

Features and Benefits

Application Instructions

Usage Restrictions

Recommended Products

Health and Safety

Data sheet

Questions

Question about the product

IMPORTANT SHIPPING & DELIVERY INFORMATION

Repair Materials Application Kit