- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Resimac 101 Metal Repair Paste is a two component solvent free epoxy metal repair compound designed to fill surface erosion & corrosion on metallic surfaces and, once cured, is readily machinable.
- Apply to mechanically & abrasive blast cleaned surfaces
- High mechanical adhesion to metal substrates
- Apply at thicknesses up to 25mm (1”)
- High build capability 25mm without slumping
- Suitable for use in immersed conditions at temperatures up to 60°C
- Resistant to dry heat up to 200°C, dependent on load
- Larger sizes available on request (30KG) - price on application
- See below for typical applications
- Note: 1KG sizes have a minimum order quantity of 4 units
- For professional use only
Features and Benefits
- For professional use only
- Approved by BUREAU VERITAS for Surface Protection and Cold Repair Products applied to Marine Vessels. Certificate No: 55258/AO BV
- Excellent chemical resistance
- Resists attack by a wide variety of inorganic acids, alkalies, salts and organic media
- Simple mixing ratio 3:1 by volume
- No shrinkage
- For optimum performance: After an initial curing period of at least 4 hours at 20°C, raising the cure temperature progressively to 60 - 100°C for up to 8 hours will result in improved mechanical, thermal and chemical resistance properties
Typical Applications
Suitable for emergency repairs or part of planned maintenance to equipment such as:
- Worn or damaged pump shafts
- Cracked pump or valve casings
- Scored hydraulic rams
- Worn bearing housings
- Damaged flanges
- Leaking tank seams
- Worn keyways
- Cracked engine blocks
- Damaged hulls on vessels
- Eroded rudder surfaces
- Corroded bow thruster tunnels
- Cold bonding steel plate
The material can also be used as a gap filling adhesive.
Application
Please refer to the data sheets tab above for the product data sheets and application guide.
Data sheet
- Manufacturer
- Resimac
- For Use By
- Professional Use
- For Use On
- Steel
- Single, Two or Three Pack
- Two-Pack
- Pack Size
- 1kg, 3kg
- Mixing Ratio
- By weight: 5:1
By volume: 3:1 - Coverage
- 0.406m² at 1mm 4.3ft² at 40mil
0.203m² at 2mm 2.2ft² at 80mil
0.135m² at 3mm 1.45ft² at 1/8” - Heat Resistance (up-to)
- dry heat up to 200°C dependent on load
Immersed conditions up to 60°C - UN Number (Activator)
- UN1759
- UN Number (Base)
- UN3077
- Pot Life
- 10°C 60 minutes
20°C 30 minutes
30°C 15 minutes
40˚C 7.5 minutes - Fully Cured
- 10°C 6 days
20°C 3 days
30°C 1.5 days
40˚C 18 hours - Suitable For Use On
- Steel
- Application Method
- Spatula
- Product Usage Type
- Repair
- Fastest Delivery
- Next Working Day
- Minimum Machining Time
- 10°C 4 hours
20°C 2 hours
30°C 1 hour
40˚C 30 mins - Maximum Overcoating Time
- 10°C 12 hours
20°C 6 hours
30°C 3 hours
40˚C 90 mins - Colour Family
- Grey
Questions
Question about the product
Sharon Guile on 2022-07-22 20:48:56 | Question:
Hello Can resimac 101 be overpainted? |
Answer from Rawlins’ Technical Team:
Yes once fully cured it can be over painted. | |
IMPORTANT SHIPPING & DELIVERY INFORMATION
Resimac 101 Metal Repair Paste is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT