- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Resimac 102 Metal Repair Fluid is a two component solvent free epoxy metal repair fluid designed to resurface and protect metallic surfaces and, once cured, is readily machinable.
- Suitable for filling mechanically or abrasive blast cleaned surfaces where excessive pitting and scarring has been caused by corrosion or chemical attack
- The material can also be used with aluminium oxide aggregates to create anti-slip finishes on metallic surfaces such belt rollers, brake test rollers and steps
- Note: 1KG sizes have a minimum order quantity of 4 units
- For professional use only
- Please note: this product is subject to a 28 Working Day lead time
Features and Benefits
- For professional use only
- Simple mixing ratio 3:1 by volume
- No shrinkage
- Brush applied
- Anti slip system when used with aggregates
- Excellent adhesion to metallic substrates
- Apply at thicknesses up to 3mm (120mil)
- Product coverage depends significantly on the condition of the substrate. Poor conditions will lead to vastly reduced coverage than stated.
- Suitable for use in immersed conditions at temperatures up to 60°C
- Resistant to dry heat up to 200°C, dependent on load
- For optimum performance: After an initial curing period of at least 4 hours at 20°C, raising the cure temperature progressively to 60 - 100°C for up to 8 hours will result in improved mechanical, thermal and chemical resistance properties
Typical Applications
Suitable for emergency repairs or part of planned maintenance to equipment such as:
- Damaged flanges
- Leaking tank seams
- Damaged hulls on vessels
- Conveyor belt rollers
- Anti slip coating for metal decks and stairs
- Resurfacing of corroded steel plates
- Filler for badly corroded tank bases
Application
Please refer to the data sheets tab above for the product data sheets and application guide.
Data sheet
- Manufacturer
- Resimac
- For Use By
- Professional Use
- For Use On
- Steel
- Single, Two or Three Pack
- Two-Pack
- Pack Size
- 1kg, 3kg
- Mixing Ratio
- By weight: 8:1
By volume: 3:1 - Coverage
- 0.440m² at 1mm
0.203m² at 2mm
0.135m² at 3mm - Heat Resistance (up-to)
- dry heat up to 200°C dependent on load
Immersed conditions up to 60°C - UN Number (Activator)
- UN1759
- UN Number (Base)
- UN2735
- Pot Life
- 10°C 60 minutes
20°C 30 minutes
30°C 15 minutes
40˚C 7.5 minutes - Fully Cured
- 10°C 6 days
20°C 3 days
30°C 1.5 days
40˚C 18 hours - Suitable For Use On
- Steel
- Application Method
- Float
- Product Usage Type
- Repair
- Minimum Machining Time
- 10°C 4 hours
20°C 2 hours
30°C 1 hour
40˚C 30 mins - Maximum Overcoating Time
- 10°C 12 hours
20°C 6 hours
30°C 3 hours
40˚C 90 mins - Colour Family
- Grey
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Resimac 102 Metal Repair Fluid is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT