- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
201 Ceramic Repair Paste is a two component solvent free epoxy repair compound containing hardened ceramic fillers designed to fill surface erosion & corrosion on metallic surfaces.
- Typical applications include worn impellers, damaged valves, separator housings, damaged pump casings, eroded pipe work, propeller, bow thrusters, rudders, corroded water boxes end plates and tube sheets
- Note: 1KG sizes have a minimum order quantity of 4 units
- For professional use only
Features and Benefits
- For professional use only
- High build capability 1" without slump
- Simple mixing ratio 3:1 by volume
- Suitable for metallic surfaces
- No shrinkage
- Excellent chemical resistance
- Resists attack by a wide variety of inorganic acids, alkalies, salts and organic media.
- Superior adhesion to metallic surfaces
- Enhanced wear & abrasion resistance
- Suitable for use in immersed conditions at temperatures up to 60°C
- Resistant to dry heat up to 200°C dependent on load
- USDA compliant for incidental food contact
- Approved by BUREAU VERITAS for Surface Protection and Cold Repair Products applied to Marine Vessels. Certificate No: 55258/AO BV
- Product coverage depends significantly on the condition of the substrate. Poor conditions will lead to vastly reduced coverage than stated
Application
Please refer to the data sheets tab above for the product data sheets/application guide for in-depth information on using this product.
Data sheet
- Manufacturer
- Resimac
- For Use By
- Professional Use
- For Use On
- Steel
- Single, Two or Three Pack
- Two-Pack
- Pack Size
- 1kg, 3kg
- Mixing Ratio
- By weight: 5:1
By volume: 3:1 - Coverage
- 1KG: 0.406m² at 1mm
0.203m² at 2mm
0.135m² at 3mm - Heat Resistance (up-to)
- Dry heat up to 200°C dependent on load
Immersed conditions up to 60°C - UN Number (Activator)
- UN1759
- UN Number (Base)
- UN3077
- Pot Life
- 10°C 60 minutes
20°C 30 minutes
30°C 15 minutes
40˚C 7.5 minutes - Fully Cured
- 10°C 6 days
20°C 3 days
30°C 1.5 days
40˚C 18 hours - Suitable For Use On
- Steel
- Application Method
- Spatula
- Product Usage Type
- Repair
- Product Range
- Ceramic Repair Paste
- Fastest Delivery
- Next Working Day
- Maximum Overcoating Time
- 10°C 12 hours
20°C 6 hours
30°C 3 hours
40˚C 90 mins - Minimum Overcoating Time
- 10°C 4 hours
20°C 2 hours
30°C 1 hour
40˚C 30 mins - Colour Family
- Grey
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Resimac 201 Ceramic Repair Paste is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT