Quick Links - Click To Jump To Section:

   
• Features & Benefits
• Application Notes
• Limitations

Features & Benefits

• Typical applications include reciprocating machinery, testing equipment, heavy crane and transporter rails, high speed turbines, centrifuges, drop forges, electroplating and chemical plants and anchoring of steel bars
• Low creep characteristics under sustained loading
• Resistant to repetitive dynamic loads
• Non-shrink, ensuring complete surface contact and bond
• High compressive, tensile and flexural strengths
• Fast, convenient installation with rapid strength gain
• Withstands a wide range of chemicals
• For larger gap widths from 10mm to 120mm please see Fosroc Conbextra EPR
• Fire Rating: EN 13501-1 Class C1 s1 dO
• Please refer to the Product Data Sheet for full details of:
  • Properties
  • Specification Clause
  • Standard Compliance
  • Mixing
  • Application Instructions
  • Estimating
  • Cleaning
  • Storage
  • Health and Safety

Application Notes

• The formwork should be constructed to be leakproof as Conbextra EP products are free-flowing grouts
• Loss of grout once the material is placed but not hardened, will result in incomplete filling of the gap
• For free-flow grout conditions it is essential to provide a hydrostatic head of grout
• To achieve this a feeding hopper system should be used
• The mixed grout should be poured steadily from one side only to eliminate the entrapment of air
• Continuous grout flow is essential
• Sufficient grout must be available prior to starting
• The time taken to pour a batch should be regulated to the time taken to prepare the next batch
• After curing the unrestrained grout should be cut back below the bottom of the baseplate using a skill saw

Please see the Product Data Sheet for detailed information.

Limitations

During application:

• Grouting may be carried out without special precautions at ambient temperatures from 5°C to 25°C
• Where ambient temperatures exceed 20°C note the pot life will be reduced
• Cure temperatures below 15°C will result in slower strength build up; at 5°C cure will stop until the material warms

Exotherm:

• All epoxy systems will develop a temperature rise on mixing
• Its extent will be a function of the volume to surface ratio, the ambient temperature as well as the mass and thermal conductivity of the surrounding materials
• Mixed Conbextra EP10 will in quantities above approximately 200 grams exotherm producing vapour
• Ensure good ventilation and do not breath fumes
• Please contact our Technical Department on 0113 2455450 (option 2) or send a message to [email protected] for specific advice

In Service:

• The cured grout, which is completely resistant to frost and sub-zero temperatures, is suitable for use up to 45°C
• Please contact our Technical Department on 0113 2455450 (option 2) or send a message to [email protected] for specific advice

IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contacted to obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and Conditions and should be applied only by an individual with the necessary expertise and experience. We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.