- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Fosroc Lokfix S25 is a two component polyester resin anchoring grout meeting the requirements of BS EN 1504-6 - Anchoring of reinforced steel bars.
Suitable for use for anchoring of steel bars into concrete, brickwork, masonry and rock.
Recommended applications include installation of starter bars, base plate bolts, MOT Bolts, installation of balustrades, installation of barriers and safety fences and installation of tie bars.
Quick Links - Click To Jump To Section:
Features & Benefits
- Supplied in pre-measured quantities
- The material cures quickly to give consistent, high performance anchorages
- Pourable grade, for use in vertical down holes
- Easy to mix and apply
- Rapid strength gain
- Vibration resistant
- Corrosion resistant
- Non-expansive
- Can be placed underwater
- Increased flowability
- Lokfix S25 is flammable - see Limitations
- Please refer to the Product Data Sheet for full details of:
- Properties
- Specification Clause
- Standard Compliance
- Mixing
- Application Instructions
- Estimating
- Cleaning
- Storage
- Health and Safety
Application Notes
- Optimum performance of Lokfix S25 requires rough sided, dust-free holes. Use of rotary percussive drills with air or water flushing is recommended
- Diamond drilled holes should be under-reamed or the surface roughened with a drill steel
- Cast holes should preferably be of inverse dovetail configuration. If parallel sided holes are cast, they should be rough to provide adequate keying
- Bar Preparation: All bars should be deformed. They should preferably be degreased, and all flaky rust removed
Please see the Product Data Sheet for detailed information.
Limitations
Fire Resistance:
- Resin anchors should not be used where structural load bearing performance must be maintained in anchors subjected to fire conditions
- Conbextra GP or Conbextra HF would be suitable in this case
- Please contact our Technical Department on 0113 2455450 (option 2) or send a message to [email protected] for advice
- Do not expose to naked flames or other sources of ignition
- No Smoking
- Containers should be tightly sealed when not in use
- In the event of fire, extinguish with CO² or foam
Data sheet
- Manufacturer
- Fosroc
- For Use By
- Professional Use
- For Use On
- Concrete
Brickwork
Masonry
Rock - Single, Two or Three Pack
- Two-Pack
- Pack Size
- 2.5L
- Application
- Pour
- Touch Dry (at 20°C)
- 25 mins
- Coverage
- Please see the Product Data Sheet - Coverage is dependent on hole diameter
- Recommended Thinner/Cleaner
- Fosroc Solvent 105
- Shelf Life (from date of manufacture)
- 12 months at 20°C will be reduced at higher temperatures
- UN Number (Activator)
- N/A
- UN Number (Base)
- UN1866
- Base Type
- Solvent-Based
- Suitable For Use On
- Masonry
- Suitable For Use On
- Concrete
- Suitable For Use On
- Brick
- Application Method
- Pour
- Manufacturer
- Fosroc
- Usages
- Anchoring
- Product Usage Type
- Strengthening
- Product Range
- Lokfix
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Fosroc Lokfix S25 is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
Fosroc Conbextra GP
Fosroc Conbextra GP is a high-flow, non-shrink, cementitious grout conforming to the requirements of BS EN 1504-3 Class R4 and BS EN 1504-6: Anchoring of reinforcing steel bar. Suitable for free flow, cementitious grouting of gap thicknesses 10 to 75 mm. Recommended applications include stanchion baseplates, joints between pre-cast concrete...
Fosroc Conbextra EP10
Fosroc Conbextra EP10 is a two component epoxy resin free-flow grout conforming to the requirements of BS EN1504-3 Class R4 and BS EN1504-6 - Anchoring of reinforcing steel bar. Suitable for use on concrete and steel for grouting under baseplates, crane rails, turbines where heavy dynamic loads are encountered and areas where chemical...
Fosroc Conbextra EPR
Fosroc Conbextra EPR is a three component epoxy resin free-flow grout conforming to the requirements of BS EN1504-3 Class R4 and BS EN1504-6 - Anchoring of reinforcing steel bar. Suitable for use on concrete and steel for grouting under baseplates, crane rails, turbines where heavy dynamic loads are encountered and areas where chemical...