- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Quick Links - Click To Jump To Section:
Features & Benefits
- For use on concrete
- Two pack epoxy adhesive
- Suitable for use as an adhesive with selected Fosroc products
- Supplied in 2L Packs
- Please refer to the Product Data Sheet for the relevant base product/system for detailed application instructions
Application Notes
Mixing:
- Transfer the entire contents of Part B of Supastik E10 Adhesive into the Part A container and mix thoroughly using a slow speed drill and Fosroc Sealant Mixing Paddle for 4 minutes, stopping to scrape down the sides of the container
- When mixed, the adhesive should be a uniform grey colour
Application:
- Use masking tape at extremities and along centre line of joint
- Apply mixed Supastik E10 using a serrated spreader to the full extent of the prepared substrate width equivalent to the membrane width plus 25mm on each side
- Following application, remove central masking tape, together with any additional tape applied to arrises. Immediately position membrane into the Supastik E10 with central release film uppermost
- Roll firmly to displace trapped air and to ensure extrusion of Supastik E10 through the edge perforations
- Apply a second layer of Supastik E10 to the full width of the top surface of membrane extending 25mm beyond the outer edges
- Remove central release film and outer edge masking tapes and feather-edge the Supastik E10 while still soft
Data sheet
- Manufacturer
- Fosroc
- For Use By
- Professional Use
- For Use On
- Concrete
- Application Method
- Spreader
- Single, Two or Three Pack
- Two-Pack
- Pack Size
- 2L
- Fully Cured (at 20°C)
- 48 hours
- Pot Life (at 20°C)
- 50 to 60 minutes
- Coverage
- Please see the attached product data sheet for details
- Max. Application Temperature
- 50°C
- Min. Application Temperature
- 5°C
- Solids by Volume
- 100%
- Shelf Life (from date of manufacture)
- 18 months in originally sealed containers stored below 25°C in cool dry conditions
- UN Number (Activator)
- UN3082
- UN Number (Base)
- UN2735
- Flashpoint
- 65°C
- Colour(s)
- Standard Colours
- Base Type
- Solvent-Based
- Suitable For Use On
- Concrete
- Application Method
- Spreader
- Manufacturer
- Fosroc
- Usages
- Adhesives
- Product Usage Type
- Adhesive
- Product Range
- Supastik
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Fosroc Supastik E10 Adhesive is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
Fosroc Expoband H45
We no longer stock this product, but can recommend Fosroc Expoband H100 as a great alternative. Please note: it is important to check that any alternative product is suitable for your requirements, as our suggestion is given in good faith but without warranty. If you are in any doubt please first contact our technical team on 0113 2455450...
Fosroc Ancillaries
Fosroc Ancillaries are a range of application tools and accessories for use when applying Fosroc products. Range Includes: Fosroc Sealant Mixing Paddle, Fosroc Thioflex Follower Plate, Fosroc Polyurea Accessories Please see below for detailed information and order references where applicable