- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Description
Features and Benefits
- For professional use only
- Consolidates and seals porous surfaces
- Improves adhesion of epoxy or PU top coats
- Tolerant of less than ideal surface preparation
- Typical applications include:
- Coating concrete floors
- Problematic cementitious surfaces
- Wet or poorly prepared steel
- As a laminating resin
- Should be applied at a target thickness of 150 microns
- Theoretical coverage rate of 6.66m² per ltr per coat
- Please note that the coverage rates quoted are theoretical and do not take into consideration the profile or condition of the surface being repaired
- Once cured the coated surface must have a semi gloss finish where there are signs of excessive porosity in the surface, the coating will have a dull finish. In such circumstances or where pinhole and weak spots are evident a second coat will be required.
- Suitable for use in immersed conditions at temperatures up to 60°C
- Resistant to dry heat up to 150°C dependent on load
Application
Please refer to the data sheets tab above for the product data sheet and application guide for in-depth information on using this product.
Product Details
7627-907527
Data sheet
- Manufacturer
- Resimac
- For Use By
- Professional Use
- For Use On
- Concrete
- Single, Two or Three Pack
- Two-Pack
- Pack Size
- 4.5L
- Mixing Ratio
- By weight: 1.65:1
By volume: 3:2 - Coverage
- 6.66m² per ltr per coat at 150 microns
- Heat Resistance (up-to)
- Up to 150°C (dry heat)
- Base Type
- Solvent-Free
- Suitable For Use On
- Concrete
- Application Method
- Brush
- Application Method
- Roller
- Product Usage Type
- Sealer
- Fastest Delivery
- Next Working Day
- Maximum Overcoating Time
- 10°C 72 hours
20°C 36 hours
30°C 18 hours
40˚C 9 hours - Minimum Overcoating Time
- 10°C 16 hours
20°C 8 hours
30°C 4 hours
40˚C 2 minutes - Usable Life
- 10°C 90 minutes
20°C 45 minutes
30°C 22.5 minutes
40˚C 11 minutes - Water/Sea Water Immersion
- Up to 60°C
- Colour Family
- Amber
- Product Type
- Epoxy
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Resimac 505 Damp Seal is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT