- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
A solvent based fibrous acrylic coating designed for application onto manual prepared surfaces and in colder climates.
The coating has been designed as an emergency waterproof coating that can be applied to leaking mineral felt, GRP, Metal and concrete surfaces. The product can be used for small in-situ repairs or as a low cost short term waterproofing system for roof and gutter surfaces. Showerproof in just 15 minutes, at 20°C.
For professional use only
Features and Benefits
- For professional use only
- Supplied ready to use and is ideal for emergency repairs to:
- Roofs
- Gutters
- Tank bases
- Fibreglass structures
- Brush or squeegee application
- Can be applied in a range of thicknesses dependent on the application:
- 1mm WFT: 1m² per ltr
- 2mm WFT: 0.5m² per ltr
- Product coverage depends significantly on the condition of the substrate. Poor conditions will lead to vastly reduced coverage than stated
- High build capability in a single coat
- Excellent flexibility and elongation
- Versatile application, brush or squeegee
- Cures at low temperature (5°C)
- Shower proof in 15 minutes
- Resistant to dry heat up to 100°C dependent on load
Application
Please refer to the data sheets tab above for the product data sheet and application guide for in-depth information on using this product.
Data sheet
- Manufacturer
- Resimac
- For Use By
- Professional Use
- For Use On
- Metallic Substrates
- For Use On
- GRP Glass-Reinforced Plastic
- For Use On
- Concrete
- For Use On
- Mineral Felt
- Single, Two or Three Pack
- Single
- Pack Size
- 5KG, 20KG
- Coverage
- 1mm WFT: 1m² per ltr
2mm WFT: 0.5m² per ltr - Touch Dry
- 10°C 24 hours
20°C 12 hours
30°C 6 hours - Suitable For Use On
- Mineral Felt
- Suitable For Use On
- Concrete
- Suitable For Use On
- GRP Glass-Reinforced Plastic
- Suitable For Use On
- Steel
- Application Method
- Squeegee
- Application Method
- Brush
- Product Usage Type
- Repair
- Product Range
- Resichem
- Maximum Overcoating Time
- Indefinite
- Showerproof
- 10°C 30 minutes
20°C 15 minutes
30°C 7.5 minutes - Colour Family
- Grey
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Resimac Resichem 551 ER Membrane is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT