- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Hempadur Speed-dry ZP 500 is an epoxy paint which combines high volume solids with a short drying time and optimised properties for shop application of full coating systems. It contains zinc phosphate for better corrosion protection.
- Suitable for onshore corrosion protection of new-build steel and constructions where fast to handle and short overcoating times are required, such as steel for factory buildings, stadiums, exhibition halls, airports, power plants, refineries, chemical and petrochemical plants.
- Complies with the European Fire Standard EN 13501-1, fire reaction class: B-s1, d0
- Available in Grey and MIO Grey
For professional use only.
Hempadur Speed-dry ZP 500 is an epoxy paint which combines high volume solids with a short drying time and optimised properties for shop application of full coating systems. It contains zinc phosphate for better corrosion protection.
Quick Links - Click To Jump To Section:
Application
- For professional use only
- For new build, maintenance and repair
- Service temperature: 140°C (maximum, dry exposure only)
- Cures down to -10°C
- Complies with the European Fire Standard EN 13501-1, fire reaction class: B-s1, d0
- Recommended thinner: Hempel Thinner 08450
- Recommended cleaner: Hempel Tool Cleaner 99610
- Applicable by brush/roller or airless spray. Nozzle pressure: 225 bar [3300 psi] Nozzle orifice: 0.019-0.021"
- DFT 70-150 micron, WFT 90-200 micron
- Coverage rate 5 m²/L-11 m²/L
If brush or roller application is used, more coats will be necessary to achieve the specified dry film thickness. Spray data are indicative and subject to adjustment. Pressure is for a material temperature of 20°C
Product may be specified in another film thickness than indicated depending on purpose and area of use. This will alter spreading rate, drying and curing time and overcoating interval. For best performance, avoid excessive film thickness. Overthickness should be closely controlled and never locally exceed 150 micron DFT. On irregular surfaces it is recommended to employ special care in avoiding over application.
Epoxy coats have an inherent tendency of chalking in outdoor exposure. This does not affect the performance of the coating.
Drying & Overcoating
Hempel’s specification supersedes any guidelines indicated in the overcoating table.
- Previous coat: None or according to Hempel’s specification.
- Subsequent coat: None or according to Hempel’s specification
- Touch dry in 60 minutes @ 20°C
Atmospheric medium
Hempadur Quattro XO 17870
-
- 18 hours - Ext. @ -10°C
- 9 hours - Ext. @ 0°C
- 120 minutes - Ext. @ 20°C
-
- 18 hours - 90 days @ -10°C
- 9 hours - 45 days @ 0°C
- 120 minutes - 10 days @ 20°C
Data sheet
- Manufacturer
- Hempel
- For Use By
- Professional Use
- Interior / Exterior Use
- Exterior Use
- For Use On
- Steel
- Application Method
- Brush, Roller, Spray
- Sheen
- Flat
- VOC Levels
- 235 g/L
- Single, Two or Three Pack
- Two-Pack
- Product Certifications
- Complies with the European Fire Standard EN 13501-1, fire reaction class: B-s1, d0
- Pack Size
- 20L
- Mixing Ratio
- Base 17509 : Curing agent 98415 (2 : 1 by volume)
- Touch Dry (at 20°C)
- 60 minutes
- Pot Life (at 20°C)
- 90 minutes
- Coverage
- 5 m²/L-11 m²/L (6 m²/L recommended)
- Recommended Thinner/Cleaner
- Hempel's Thinner 08450/Hempel's Tool Cleaner 99610
- Min. Application Temperature
- -10°C
- Solids by Volume
- 75 ± 2%
- Heat Resistance (up-to)
- 140°C maximum, dry exposure only
- Shelf Life (from date of manufacture)
- 36 months (Base) 12 months (Curing Agent)
- Finish
- Flat
- Recommended Dry Film Thickness
- 70-150 micron (125 recommended)
- Recommended Wet Film Thickness
- 90-200 micron (170 recommended)
- Specific Gravity
- 1.6 kg/L
- Hard Dry
- 3½ hours @ 20°C
- Flashpoint
- 26°C
- Colour(s)
- Standard Colours
- Base Type
- Solvent-Based
- Suitable For Use On
- Steel
- Finish
- Flat
- Application Method
- Brush
- Application Method
- Roller
- Application Method
- Spray
- Usages
- MIO
- Product Usage Type
- Primer
- Product Range
- Hempadur Speed-Dry
- Colour Family
- Grey
- Colour Family
- Red
- Dry to Recoat (@ 20-25°C)
- 2 hours
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Hempel Hempadur Speed-Dry ZP 500 is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
Hempel Thinner 08450
Hempel's Thinner 08450 is a general purpose thinner for Hempadur qualities. For paint to be applied in a low film thickness (for instance as a "sealer coat") or if the paint has become too thick, e.g. in cold weather Tools can usually be cleaned with the thinner prescribed for the product
Hempel Hempathane HS 55610
Hempel Hempathane HS 55610 is a glossy polyurethane topcoat, cured with aliphatic isocyanate. The product has good gloss and colour retention and contains zinc phosphate. For professional use only Recommended as VOC compliant, highbuild finishing coat for protection of structural steel in severely corrosive environment, and may be...
Hempel Tool Cleaner 99610
Hempel Tool Cleaner 99610 is a blend of strong solvents for cleaning of tools that have been used for mixing or application of two-component epoxy products. Better cleaning properties than epoxy thinners, and does not contain chlorinated solvent For cleaning of brushes, paint rollers, spray equipment, and other tools which have been used...