- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Hempadur Speed-Dry ZP 600 is a self-priming, two-component high build epoxy paint containing zinc phosphate.
Recommended use:
- As a fast curing primer or intermediate coat in mild to severely corrosive environment
- As a topcoat where the usual cosmetic performance of epoxy coatings is acceptable.
- As a single coat direct to metal in mild corrosive environment
For professional use only.
Note: Colours are an approximation and not binding
Description
Hempadur Speed-Dry ZP 600 is a self-priming, two-component high build epoxy paint containing zinc phosphate.
Quick Links - Click To Jump To Section:
Features & Benefits
- For professional use only
- For new build, maintenance and repair
- Service temperature: 140°C (maximum, dry exposure only)
- Recommended thinner: Hempel Thinner 08450
- Recommended cleaner: Hempel Tool Cleaner 99610
- Applicable by brush/roller or airless spray. Nozzle pressure: 250 bar [3600 psi] Nozzle orifice: 0.019-0.021"
- DFT 75-200 micron, WFT 110-290 micron
- Coverage rate 3.5 m²/L-9.4 m²/L
Product may be specified in another film thickness than indicated depending on purpose and area of use. This will alter spreading rate, drying and curing time and overcoating interval. For best performance, avoid excessive film thickness.
If brush or roller application is used, more coats will be necessary to achieve the specified dry film thickness. Product requires heavy duty spray equipment; spray hoses shall be as short as possible. Spray data are indicative and subject to adjustment. Pressure is for a material temperature of 20°C
Epoxy coats have an inherent tendency of chalking in outdoor exposure. This does not affect the performance of the coating.
Drying & Overcoating
Hempel’s specification supersedes any guidelines indicated in the overcoating table. Overcoating times are indicative for products of the same generic chemistry.
- Previous coat: None or according to Hempel’s specification
- Subsequent coat: None or according to Hempel’s specification
- Hard dry in 120 minutes @ 20°C
Atmospheric Medium
Hempadur Speed-Dry ZP600 / Hempathane HS 55610
- 9 hours - 90 days @ 0°C
- 4 hours - 60 days @ 10°C
- 120 minutes - 30 days @ 20°C
Product Details
7654-907964
Data sheet
- Manufacturer
- Hempel
- For Use By
- Professional Use
- Interior / Exterior Use
- Exterior Use
- For Use On
- Metal
- Application Method
- Brush/roller, airless spray
- Sheen
- Flat
- VOC Levels
- 282 g/L
- Single, Two or Three Pack
- Two-Pack
- Pack Size
- 5L, 20L
- Mixing Ratio
- Base 4541N : Curing agent 9843A (5 : 1 by volume)
- Pot Life (at 20°C)
- 60 minutes
- Coverage
- 3.5 m²/L-9.4 m²/L (7.1 m²/L recommended)
- Recommended Thinner/Cleaner
- Hempel's Thinner 08450, Hempel's Tool Cleaner 99610
- Min. Application Temperature
- 0°C
- Solids by Volume
- 71 ± 2%
- Heat Resistance (up-to)
- 140°C (Maximum, dry exposure only)
- Shelf Life (from date of manufacture)
- 36 months
- Finish
- Flat
- Recommended Dry Film Thickness
- 75-200 microns (100 recommended)
- Recommended Wet Film Thickness
- 110-290 microns (150 recommended)
- Specific Gravity
- 1.5 kg/L
- Hard Dry
- 120 minutes @ 20°C
- Flashpoint
- 25°C
- Colour(s)
- 10000 White, 50630 Red, 18620 Grey
- Base Type
- Epoxy
- Base Type
- Solvent-Based
- Suitable For Use On
- Steel
- Finish
- Flat
- Application Method
- Roller
- Application Method
- Brush
- Application Method
- Spray
- Usages
- Quick Drying
- Usages
- Zinc Phosphate
- Usages
- High Build
- Usages
- Atmospheric
- Usages
- Intermediate
- Product Usage Type
- Primer
- Product Range
- Hempadur Speed-Dry
- Colour Family
- Grey
- Colour Family
- White
- Colour Family
- Red
- Dry to Recoat (@ 20-25°C)
- 2 hours
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Hempel Hempadur Speed-Dry ZP 600 is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
You might also like
Hempel Thinner 08450
Hempel's Thinner 08450 is a general purpose thinner for Hempadur qualities. For paint to be applied in a low film thickness (for instance as a "sealer coat") or if the paint has become too thick, e.g. in cold weather Tools can usually be cleaned with the thinner prescribed for the product
Price
£25.39
(incl. VAT)
In Stock and Available for Delivery
Hempel Hempathane HS 55610
Hempel Hempathane HS 55610 is a glossy polyurethane topcoat, cured with aliphatic isocyanate. The product has good gloss and colour retention and contains zinc phosphate. For professional use only Recommended as VOC compliant, highbuild finishing coat for protection of structural steel in severely corrosive environment, and may be...
Price
£77.92
(incl. VAT)
In Stock and Available for Delivery
Hempel Tool Cleaner 99610
Hempel Tool Cleaner 99610 is a blend of strong solvents for cleaning of tools that have been used for mixing or application of two-component epoxy products. Better cleaning properties than epoxy thinners, and does not contain chlorinated solvent For cleaning of brushes, paint rollers, spray equipment, and other tools which have been used...
Price
£34.61
(incl. VAT)
In Stock and Available for Delivery