Can this paint be mixed to automotive colours

Unfortunately no, this can be mixed to many RAL, NCS or BS colours.

Hi thinking of painting our chartwell green composite front door to match our soon to be fitted agate grey windows. Is this something that we could undertake or does it need to be done by a professional. Have done lots of painting over the years but not sure about the correct product to use and if the finished result would be satisfactory. Thank you

Assuming the composite door is clean, dry, sound and prepared as detailed in the technical data sheet this product can be used for this application. This is a two pack product, as such it has a short potlife for application, this is suitable for brush application. Also for brush application we can also recommend the Kolorbond uPVC Painting Kits , this is a single pack water based option that comes complete wth the preparatory cleaners required. Both options when prepared and applied with the preparatory products have a 10 year adhesion guarantee and a 5 year colour fastness guarantee.

We are intending on painting several internal Windows from rosewood upvc to white could you advise on what products would need to be purchased ie prep work,paint req etc many thanks

Assuming the upvc is clean, dry, sound and prepared as detailed in the technical data sheet this product can be used. This is a 2 pack product if a waterbased lower odour product would be more suitable Technispray Kolorbond Aquatek could be used. The preparation of the substrates is the same. Clean the substrate using Technispray VinylKleen . Thoroughly clean the surface again using Technispray WindowPrep on a clean white cloth which should be regularly turned. Lightly abrade the surfaces to be painted with red Scotchbrite and remove debris.

Kolorbond DecoPro | Brush Grade uPVC, Metal & Glass Paint (Technispray) | 5000+ Colours

Kolorbond DecoPro

Reference TechDecoPro

Brand Kolorbond

Search ID KOL7660

5,000+ Colours.
Two-pack polyurethane (PU) coating.
For metals, glass-reinforced plastic (GRP), and hard plastics.
In multiple gloss levels (10%, 30%, 50%, and 70%).
Professional use only.
Fire tested to: ISO 5658-2:2006+A1:2011; does not upgrade surface. Full report can be found in the Data Sheets tab below.

Please note: Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colour.

Chemically bonds with the surface - 10 year guarantee.
Extremely colour stable - guaranteed to hold its colour, without excessive fading, for 5 years.

Important!

Performance and guarantees not valid without purchase and use of the relevant cleaning products.

Product customisation

Don't forget to save your customization to be able to add to cart

Colour Group

Size

Finish

Option

Add-Ons

£76.14(incl. VAT)

£63.45(ex. VAT)

Quantity

Please choose your colour

Available for Delivery (See Delivery Options Below)

ColourPicker Explained

In general we sort colours for products into 2 main groups - ‘Ready Mixed’ and ‘Tinted’.
Tinted colours will always be more expensive than Ready Mixed colours as they need to be produced at the time of order using a tinting machine dispensing colourant into a base*.
During busy periods, this means that tinted colours could take longer, for example – a ready mixed colour ordered on a 3-5 day delivery might arrive within 3 days, however a tinted colour might take the full 5 days to arrive.

To find Ready Mixed colours, search "ready mixed" or select the Ready Mixed 'colour chart'. To see Tinted colours select a colour chart such as RAL, BS, NCS, etc. or search for a colour/hue to see available or related options.

To ensure fair pricing, we split colours into ‘Price Bands’ to group together similar priced colours. If you wish to search for the cheapest tinted colours, always select Price Band 1.

We make every effort to list all available colours, however we also offer a colour match service which can be accessed by contacting our Technical Team on 0113 245 5450 (option 2) or emailing [email protected]

*Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colour

Colour reproduction of the Products on the Site is limited by the technology used to deliver web pages and by the colour representation of Customer’s own monitor and computer set-up. We have made every effort to display as accurately as possible the colours of our Products but we cannot guarantee that the colour shown on Customer’s monitor’s display will accurately reflect the colour of the Product on delivery. We recommend that Customer first purchases the smallest Product available or access an industry standard colour chart in person (and not digitally) to ensure that the colour is acceptable for its purposes.

3 questions about the product

Description

Professional use only - from the 24th August 2023, adequate training is required before industrial or professional use of this product.

Should you require training, visit - https://www.safeusediisocyanates.eu/

Kolorbond DecoPro

This two-pack polyurethane (PU) coating is designed for various substrates, including metals, GRP, aluminium, and hard plastics. It offers excellent durability and protection, making it suitable for industrial use. Whether you need a smooth finish on metal surfaces or want to enhance the longevity of plastic components, this product delivers a high-quality, long-lasting solution. Available in several gloss levels, it provides versatility for different appearance preferences.

Application and Use

The product is best applied with a brush or roller, but it can also be spray-applied with a maximum of 20% K2 Thinners for better consistency. It dries quickly, becoming dust-free in an hour and achieving full hardness within 16 hours at room temperature. To ensure optimal results, clean and prepare surfaces before application. It is suitable for use on metals such as cast iron and steel, aluminium, galvanised steel, and PVCu. For best adhesion to glass, use the Windowprep cleaning solution along with 75ml of G-Pro mixed with the paint.

Preparation and Mixing

Ensure proper preparation of substrates by abrading surfaces, cleaning with appropriate solutions, and ensuring they are free from dirt, grease, or contaminants. Mix four parts of the base product with one part K2 Hardener by volume for a uniform application. The mixed product has a working time (pot life) of two hours at 20°C, so ensure you use the mixture within this period.

Restrictions and Limitations

This product is designed for professional and industrial applications only when sprayed. It must not be used in confined spaces without proper ventilation. Operatives using spray equipment must wear air-fed spray masks and protective gloves to avoid inhalation of harmful vapours. Do not apply on surfaces that are not properly prepared, as this will affect the performance and durability of the coating. Avoid exposure to direct sunlight during storage, and do not store containers in temperatures above 50°C.

Health and Safety

UN Number: 1263

Requires storage in a well-ventilated, cool area. It contains xylene and diisocyanates, which may cause irritation to the skin, eyes, and respiratory system. Use appropriate protective equipment when handling, and avoid direct contact with the skin. Always refer to the Safety Data Sheet (SDS) for more detailed health and safety information.

Product Details

Reference 7660-908436

Data sheet

Manufacturer: Kolorbond
For Use By: Professional Use
Interior / Exterior Use: Exterior Use
Water / Solvent Based: Solvent
For Use On: UPVC
GRP
Mill
Composite Doors
Aluminium
Stainless Steel
Hard Plastics
Cast Iron
Steel
Light Alloys
Galvanising
Phosphated Steel
Glass
Application Method: Brush
Sheen: Matt
Satin
Semi-Gloss
Gloss
Single, Two or Three Pack: Two-Pack
Pack Size: 1.25L Pack
2.5L Pack
5L Pack
1L
5L
Mixing Ratio: By volume: 4 parts base, 1 part hardener
Mixing Ratio: By weight: 5 parts base, 1 part hardener
Application: Brush, Roller, Spray
Pot Life (at 20°C): 2 hours
Coverage: 6m² per litre (50 micron dry film thickness)
Recommended Thinner/Cleaner: K2 Thinners
Min. Application Temperature: 10°C
VOC: 470-500 g/l (dependant on colour)
UN Number: UN1263
Drying time: At 20°C: dust free: 1 hour
Specific Gravity: At 20°C: Kolorbond DevoPro 1.3 g/cm³, K2 Hardener 1.0 g/cm³
Solids by Weight: 65-70% by weight (dependant on colour)
Hard Dry: At 20°C: 16 hours, at 50C: 1 hour
Flashpoint: 23°C (method ISO3679)
Flash Time (Between Coats): 15 minutes
Colour(s): Fully Tintable
Base Type: Solvent-Based
Suitable For Use On: Composite Doors
Suitable For Use On: Galvanising
Suitable For Use On: UPVC
Suitable For Use On: Aluminium
Suitable For Use On: Stainless Steel
Suitable For Use On: Steel
Suitable For Use On: Cast Iron
Suitable For Use On: Light Alloys
Suitable For Use On: Glass
Suitable For Use On: GRP Glass-Reinforced Plastic
Suitable For Use On: Mill
Suitable For Use On: Hard Plastics
Suitable For Use On: Phosphated Steel
Finish: Matt (10%)
Finish: Satin (30%)
Finish: Semi-Gloss (50%)
Finish: Gloss (70+%)
Application Method: Brush
Manufacturer: Kolorbond
Components: 2K
Usages: Abrasion Resistant
Product Usage Type: Topcoat
Colour Family: Red
Colour Family: Brown
Colour Family: Pink
Colour Family: Orange
Colour Family: Purple
Colour Family: Yellow
Colour Family: Black
Colour Family: Neutral
Colour Family: Chartwell Green
Colour Family: Beige
Colour Family: Grey
Colour Family: Green
Colour Family: Blue
Seasonal: Cold Weather
Seasonal: Warm Weather

Attachments

Download

Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.

Questions

Question about the product

Name ^*

Email ^*

Question ^*

^* Required fields

I have read and agree to the conditions of use (read)

Neil jones on 2023-04-02 17:40:55	Question: Can this paint be mixed to automotive colours
	Answer from Rawlins’ Technical Team: Unfortunately no, this can be mixed to many RAL, NCS or BS colours.

Gill Harris on 2021-12-16 23:19:15	Question: Hi thinking of painting our chartwell green composite front door to match our soon to be fitted agate grey windows. Is this something that we could undertake or does it need to be done by a professional. Have done lots of painting over the years but not sure about the correct product to use and if the finished result would be satisfactory. Thank you
	Answer from Rawlins’ Technical Team: Assuming the composite door is clean, dry, sound and prepared as detailed in the technical data sheet this product can be used for this application. This is a two pack product, as such it has a short potlife for application, this is suitable for brush application. Also for brush application we can also recommend the Kolorbond uPVC Painting Kits, this is a single pack water based option that comes complete wth the preparatory cleaners required. Both options when prepared and applied with the preparatory products have a 10 year adhesion guarantee and a 5 year colour fastness guarantee.

Joanne on 2021-09-22 11:44:25	Question: We are intending on painting several internal Windows from rosewood upvc to white could you advise on what products would need to be purchased ie prep work,paint req etc many thanks
	Answer from Rawlins’ Technical Team: Assuming the upvc is clean, dry, sound and prepared as detailed in the technical data sheet this product can be used. This is a 2 pack product if a waterbased lower odour product would be more suitable Technispray Kolorbond Aquatek could be used. The preparation of the substrates is the same. Clean the substrate using Technispray VinylKleen. Thoroughly clean the surface again using Technispray WindowPrep on a clean white cloth which should be regularly turned. Lightly abrade the surfaces to be painted with red Scotchbrite and remove debris.

IMPORTANT SHIPPING & DELIVERY INFORMATION

Kolorbond DecoPro is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.

Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.

Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.

All delivery costs below are excluding VAT

Kolorbond K2 Thinner

Thinner for use with Kolorbond K2 and the brush grade version Kolorbond DecoPro. More Info Delivery Info

£21.60 (incl. VAT)

Shop now

In Stock and Available for Delivery

Kolorbond K2 Accelerator

For use with Kolorbond K2 and the brush grade version Kolorbond DecoPro, two pack PU coatings which can be applied directly onto a variety of substrates including uPVC, metals, GRP and hard plastics. K2 Accelerator is used to accelerate the curing process of Kolorbond K2 and Kolorbond DecoPro when added at 2%. More Info Delivery Info...

£57.60 (incl. VAT)

Shop now

In Stock and Available for Delivery

Kolorbond WindowPrep

Alcohol-based colourless cleaner. For use on uPVC surfaces. Professional use only.

£21.60 (incl. VAT)

Shop now

In Stock and Available for Delivery

Kolorbond DecoPro