Description

HMG Stoving Enamel Hammer Finish is a high performance, rapid curing, high build, general purpose stoving enamel in a hammer finish. It combines excellent colour and gloss retention together with good physical properties.

HMG Stoving Enamel Hammer Finish is suitable for most domestic and industrial applications where it offers fast production turn around combined with economy and good technical properties.

For the gloss finish, tintable version of this product, please see HMG Stoving Enamel.

Click To Jump To Section:

Features & Benefits
Film Thickness Range And Coverage
Surface Preparation
Application Methods
Stoving Schedule
Important Instructions Before Use
Health & Safety

Features & Benefits

Easy to use
Offers good long term durability
Fast Drying - Fully Cured in 30 minutes @120°C
Temperature resistant up to 160°C
Available in a wide colour range
For spray application on metal surfaces

Film Thickness Range And Coverage

Product Data
	Dry Film Thickness	Wet Film Thickness
Compliant Spray Gun:	25 μm	50 μm
Pressure Pot:	25 μm	50 μm

Coverage: 20 square metres per litre @ 25 microns dft

HMG Technical Data Sheets indicate a dry film thickness that will be achieved when applying a particular wet film thickness
These values are a guide only and are not to be used as specifications
Film thickness will vary depending on actual use and specification
Great care should be taken to achieve the dft stated in the agreed specification and to avoid areas of excessively low or high thickness

Surface Preparation

Ensure surfaces to be coated are dry and must be cleaned using the appropriate HMG product to remove all traces of contaminants

Application Methods

Technical Data
	Compliant Spray Gun	Pressure Pot
Mixing Ratio:	Base: 1	Base: 1
Mixing Ratio:	Thinner: >20%	Thinner: >20%
Thinner Options:	Thinner 2691	Thinner 2691
Thinner Options:	-	-
Viscosity:	25 - 35 seconds B4 cup	25 - 35 seconds B4 cup
Spray Gun Setup:	1.6 - 1.8	1.2 - 1.4
Number Of Coats (Guide Only):	1 - 2 full coats	1 - 2 full coats
Flash Off:	15 minutes @20°C	15 minutes @20°C

For further information on mixing ratios please contact our Technical Department on 0113 2455450 (option 2) or send a message to [email protected].

Stoving Schedule

This product must be 'Stoved' after application
The ovens should always be at specified temperature before use

HMG Stoving Enamel Hammer Finish:

30mins @ 120°C metal temperature

Important Instructions Before Use

Read and follow SDS, TDS and label instructions
Stir all paints thoroughly before use
Always use the same batch number on the same job
Check colour and sheen prior to application
Filter the product immediately before use
Reduce emissions and maintain quality by replacing tin lid after use
If in any doubt, please contact our Technical Department on 0113 2455450 (option 2) or send a message to [email protected]

Health & Safety

Refer to the Safety Data Sheets in the attachments section above and tin label prior to use
Suitable respiratory equipment should be worn when spraying

Product Details

Reference 7664-908576

Data sheet

Manufacturer: HMG Paints Limited
For Use On: Metal
Sheen: Hammered
Single, Two or Three Pack: Single
Pack Size: 1L, 2.5L, 5L
Application: Spray
Coverage: 20 square metres per litre @25 microns dft
Density: 0.982 g/cm³
Solids by Volume: 50.6 %
Heat Resistance (up-to): 160°C
VOC: 0.5 Kg/l
Shelf Life (from date of manufacture): 12 months from delivery date in original sealed containers.
Store between 5°C - 25°C. When not in use, cans must be kept sealed.
Recommended Dry Film Thickness: 25 μm
Recommended Wet Film Thickness: 50 μm
UN Number: UN1263
Fully Cured: 30 Minutes @120°C
Flashpoint: 4°C
Colour(s): Standard Colours
Base Type: Solvent-Based
Suitable For Use On: Metal
Finish: Hammered
Application Method: Spray
Manufacturer: HMG Paints LTD
Product Usage Type: Topcoat
Colour Family: Copper
Colour Family: Bronze
Colour Family: Stone
Colour Family: Grey
Colour Family: Green
Colour Family: Blue
Colour Family: Red
Colour Family: Orange
Colour Family: Black
Colour Family: Metallic
Colour Family: Gold

Attachments

Download

Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.

Questions

Question about the product

Name ^*

Email ^*

Question ^*

^* Required fields

I have read and agree to the conditions of use (read)

Be the first to ask a question about this product!

IMPORTANT SHIPPING & DELIVERY INFORMATION

HMG Stoving Enamel Hammer Finish is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.

Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.

Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.

All delivery costs below are excluding VAT

HMG Thinner 2691

HMG Thinner 2691 is a thinner for use in various applications. For use with compatible HMG systems.

£13.30 (incl. VAT)

Shop now

In Stock and Available for Delivery

Surface Preparation Kits for Steel

These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools) 1 x Rust-Oleum...

£25.93 (incl. VAT)