- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
- 3,300+ matt colours.
- One pack smooth, relatively self cleansing, masonry finish for use on concrete, cement render, pebble dashed substrates etc.
- Tough Pliolite resin pigmented with inorganic pigments and texturing minerals with aromatic solvent.
- Touch dry in approximately 1 hour at 20°C.
Please note: Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colour.
Product customisation
Don't forget to save your customization to be able to add to cartDescription
Tor Unicover Plio Finish Smooth is a one pack smooth matt relatively self cleansing masonry finish for use on concrete, cement render, pebble dashed substrates etc.
Tor Unicover Plio Finish Smooth is a tough Pliolite resin pigmented with inorganic pigments and texturing minerals with aromatic solvent.
Available in over 4,100 colour options, including RAL, BS, NCS & the new NCS 2050 shades.
Quick Links - Click To Jump To Section:
- Features & Benefits
- Surface Preparation
- Application Details
- Drying Times
- Storage & Handling
- Limitations
- Health & Safety
Features & Benefits
- For use on concrete, cement render, pebble dashed substrates etc.
- Smooth Matt finish
- Available in over 4,100 colour options, including RAL, BS, NCS & the new NCS 2050 shades
- Tough Pliolite resin pigmented with inorganic pigments and texturing minerals with aromatic solvent
- Touch dry in 1 hour @20°C, hard dry in 8 hours @20°C
- Good theoretical coverage of up to 12 square metres per litre
Surface Preparation
Bare Surfaces:
- Apply over suitably prepared, clean, dry sound surfaces that are free of mould & mildew and have been primed/stabilised with a thinned coat of CR506 (10% Tor General Purpose Thinner)
Previously Painted Surfaces:
- Ensure surface to be painted is clean, dry, sound and free of any surface contamination such as mould, mildew, dirt etc.
- Remove any loose, failing or unsound paint back to a firm feathered edge
- Treat any surface mould with Tor Torkill W Fungicidal Solution, in accordance with product recommendations
- Clean surfaces with Torstrip WDA10 Wash Down Agent where required, in accordance with product recommendations
- Ensure substrate is completely dry before painting, maximum moisture content of 16%
- Fill any areas required with a proprietor filler before applying the paint system
Application Details
| Application | |
|---|---|
| Mix Ratio | N/A |
| Method of application | Preferred short/medium pile roller or airless spray (0.015” tip and 2000 psi atomising pressure) |
| Thinner | Tor General Purpose Thinner (when required) |
| Cleaner | Tor General Purpose Thinner for cleaning equipment |
| Pot Life | N/A |
Drying Times
| Substrate Temperature | Touch Dry | Hard Dry | Overcoating Interval | |
|---|---|---|---|---|
| Minimum | Maximum | |||
| 20°C | 1 hours | 8 hours | 4 hours | Unlimited |
Note: Drying/curing times will be shortened by higher temperatures and lengthened by lower temperatures
Storage & Handling
Store in a safe place out of the reach of children.
Flash point
- Above 37°C
Shelf life
- 5 years in unopened containers
Limitations
- Cracks other than “hairline” must be filled prior to treatment
- Smooth matt finish will not disguise surface irregularities
Health & Safety
- A copy of the appropriate Health & Safety Data Sheet should be consulted prior to using the product
- Minimum precautions for all paints:
- Avoid skin and eye contact i.e. wear gloves, goggles, etc
- Ensure good ventilation, mechanical if necessary
- Store and use away from heat and flame
- Do not eat or smoke in the vicinity of work
- Wash hands before eating
- Refer to supply container for additional warning labels
Product Details
7825-980754
Data sheet
- Manufacturer
- Tor Coatings
- For Use By
- Consumer Use
- Interior / Exterior Use
- Exterior Use
- For Use On
- Concrete
Cement
Render
Pebble Dashed Substrates - Sheen
- Smooth Matt
- Colour
- Colour Tintable
- Colour
- Fully Tintable
- Single, Two or Three Pack
- Single
- Pack Size
- 5L
- Application
- Roller
Airless Spray - Touch Dry (at 20°C)
- 1 Hours
- Coverage
- 12 sq.metres per litre
- Recommended Thinner/Cleaner
- TH10
- Min. Application Temperature
- 4°C
- Shelf Life (from date of manufacture)
- 5 Years in unopened containers
- Recommended Dry Film Thickness
- 41 microns dft
- Recommended Wet Film Thickness
- 84 microns dft
- UN Number
- UN1263
- Hard Dry
- 8 Hours @20°C
- Colour(s)
- Fully Tintable
- Base Type
- Solvent-Based
- Suitable For Use On
- Concrete
- Suitable For Use On
- Render
- Suitable For Use On
- Cement
- Suitable For Use On
- Pebble Dash
- Finish
- Matt
- Finish
- Smooth Matt
- Application Method
- Roller
- Application Method
- Spray
- Manufacturer
- Tor Coatings
- Usages
- Self-Cleansing
- Product Usage Type
- Topcoat
- Product Range
- Unicover
- Product Range
- Tor Balcony & Masonry
- Colour Family
- White
- Colour Family
- Neutral
- Colour Family
- Anthracite Grey
- Colour Family
- Violet
- Colour Family
- Cream
- Colour Family
- Beige
- Colour Family
- Grey
- Colour Family
- Green
- Colour Family
- Blue
- Colour Family
- Red
- Colour Family
- Brown
- Colour Family
- Pink
- Colour Family
- Orange
- Colour Family
- Purple
- Colour Family
- Yellow
- Colour Family
- Off-White
- Colour Family
- Black
- Categorised As
- Smooth Masonry Finishes
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Tor Unicover Plio Finish Smooth Masonry Paint is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
You might also like
Torkill W Fungicidal Solution
Solution of an approved biocide in water, HSE Approval No 4246 for use as a masonry surface biocide for professional use against mould, fungi, moss, etc. Suitable for treatment of similarly affected roof surfaces
Price
£38.38
(incl. VAT)
In Stock and Available for Delivery
Torstrip WDA10 Wash Down Agent
A blend of surfactants, detergents and water for the washing down of previously painted and recently stripped surfaces prior to application of paint systems.
Price
£58.24
(incl. VAT)
In Stock and Available for Delivery
Tor General Purpose Thinner
Tor General Purpose Thinner (TH10) - also known as Tor Tortread SP Thinners - is to be used for the thinning (where necessary) of general purpose primers, undercoats and finishes or for cleaning the same materials from brushes, rollers and trays immediately after application.
Price
£41.58
(incl. VAT)
In Stock and Available for Delivery